QLA2XXX driver on Debian, Abort command issued (SOLVED)

Getting your soundcard to work, using Debian on non-i386 hardware, etc

QLA2XXX driver on Debian, Abort command issued (SOLVED)

Postby marcink8563 » 2009-11-01 19:01

We are having problems using our QMH2462 4Gb Fibre Channel HBA on Debian Lenny 64bit with latest binary kernel image (2.6.26) and official, stable qla2xxx driver module (qla2xxx.ko: 8.02.01-k4, firmware: 4.04.00 and other 4.04.XX builds available at ftp.qlogic.com).

Code: Select all
# uname -a
Linux 2.6.26-2-amd64 #1 SMP Wed Aug 19 22:33:18 UTC 2009 x86_64 GNU/Linux


Basically the problem is that accessing hardware, e.g. using 'fdisk -l', hangs process for about 1-2 minutes while probing QMH2462 devices.
At the same time syslog is filled with "Abort command issued" entries.

Code: Select all
# dmesg | grep qla2x
[    2.673814] qla2xxx 0000:10:00.0: Found an ISP2432, irq 18, iobase 0xffffc20000c58000
[    2.673814] qla2xxx 0000:10:00.0: Configuring PCI space...
[    2.673814] qla2xxx 0000:10:00.0: Configure NVRAM parameters...
[    2.720120] qla2xxx 0000:10:00.0: Verifying loaded RISC code...
[    3.011436] qla2xxx 0000:10:00.0: Allocated (64 KB) for EFT...
[    3.011540] qla2xxx 0000:10:00.0: Allocated (1413 KB) for firmware dump...
[    3.021281] qla2xxx 0000:10:00.0: Flash[MID]: (0xbf/0x8e) erase=0x7ffd03d8 pro=0 upro=0 idx=0 wrtd=0x9c blk=0x10000.
[    3.052373] qla2xxx 0000:10:00.0: MSI-X: Unsupported ISP2432 SSVID/SSDID (0x103C, 0x1705).
[    3.052373] scsi0 : qla2xxx
[    3.052373] qla2xxx 0000:10:00.0:
[    3.052373] qla2xxx 0000:10:00.1: Found an ISP2432, irq 19, iobase 0xffffc20000c5a000
[    3.052373] qla2xxx 0000:10:00.1: Configuring PCI space...
[    3.052506] qla2xxx 0000:10:00.1: Configure NVRAM parameters...
[    3.108780] qla2xxx 0000:10:00.1: Verifying loaded RISC code...
[    3.387120] qla2xxx 0000:10:00.1: Allocated (64 KB) for EFT...
[    3.387201] qla2xxx 0000:10:00.1: Allocated (1413 KB) for firmware dump...
[    3.399955] qla2xxx 0000:10:00.1: Flash[MID]: (0xbf/0x8e) erase=0x7ffd03d8 pro=0 upro=0 idx=0 wrtd=0x9c blk=0x10000.
[    3.519269] qla2xxx 0000:10:00.1: MSI-X: Unsupported ISP2432 SSVID/SSDID (0x103C, 0x1705).
[    3.519269] scsi1 : qla2xxx
[    3.519292] qla2xxx 0000:10:00.1:
[    3.830851] qla2xxx 0000:10:00.0: LOOP UP detected (4 Gbps).
[    3.833690] scsi(0): qla2x00_reset_marker()
[    3.833690] scsi(0): qla2x00_loop_resync()
[    4.137389] scsi(0): qla2x00_loop_resync - end
[    4.693496] qla2xxx 0000:10:00.0: scsi(0:0:0:0): Queue depth adjusted-up to 4.
[    4.841362] qla2xxx 0000:10:00.1: LOOP UP detected (4 Gbps).
[    4.841362] scsi(1): qla2x00_reset_marker()
[    4.841362] scsi(1): qla2x00_loop_resync()
[    4.929893] scsi(1): qla2x00_loop_resync - end
[    5.102990] qla2xxx 0000:10:00.1: scsi(1:0:0:0): Queue depth adjusted-up to 4.
[   44.115461] qla2xxx_eh_abort(0): aborting sp ffff81022c1cafc0 from RISC. pid=4.
[   44.263320] qla2xxx 0000:10:00.0: scsi(0:0:0): Abort command issued -- 1 4 2002.
[   83.459823] qla2xxx_eh_abort(0): aborting sp ffff81022c1ca500 from RISC. pid=23.
[   84.617590] qla2xxx 0000:10:00.0: scsi(0:0:0): Abort command issued -- 1 17 2002.
[   84.617579] qla2xxx_eh_abort(0): aborting sp ffff81022c1ca540 from RISC. pid=26.
[   84.626012] qla2xxx 0000:10:00.0: scsi(0:0:0): Abort command issued -- 1 1a 2002.
[   95.872478] scsi(0): qla2x00_port_login()
[   95.881597] scsi(0): qla2x00_port_login - end
[  135.369630] qla2xxx_eh_abort(0): aborting sp ffff81022b2ad4c0 from RISC. pid=303268.
[  135.506353] qla2xxx 0000:10:00.0: scsi(0:0:0): Abort command issued -- 1 4a0a4 2002.
[  172.941768] qla2xxx_eh_abort(0): aborting sp ffff81022bd37fc0 from RISC. pid=303277.
[  172.941768] qla2xxx 0000:10:00.0: scsi(0:0:0): Abort command issued -- 1 4a0ad 2002.
[  191.089267] scsi(0): qla2x00_port_login()
[  191.095454] scsi(0): qla2x00_port_login - end
[  251.102045] qla2xxx_eh_abort(0): aborting sp ffff81022b2ad840 from RISC. pid=595830.
[  251.101982] qla2xxx 0000:10:00.0: scsi(0:0:0): Abort command issued -- 1 91776 2002.
[  310.137474] qla2xxx_eh_abort(0): aborting sp ffff81022b2ad980 from RISC. pid=595831.
[  310.137474] qla2xxx 0000:10:00.0: scsi(0:0:0): Abort command issued -- 1 91777 2002.
[  329.972559] scsi(0): qla2x00_port_login()
[  329.990354] scsi(0): qla2x00_port_login - end
[  389.469626] qla2xxx_eh_abort(0): aborting sp ffff81022d016980 from RISC. pid=595854.
[  389.469626] qla2xxx 0000:10:00.0: scsi(0:0:0): Abort command issued -- 1 9178e 2002.
[  444.890171] qla2xxx_eh_abort(0): aborting sp ffff81022d016980 from RISC. pid=595859.
[  444.890154] qla2xxx 0000:10:00.0: scsi(0:0:0): Abort command issued -- 1 91793 2002.
[82561.735171] scsi(0): qla2x00_port_login()
[82561.739382] scsi(0): qla2x00_port_login - end
[82606.558128] qla2xxx_eh_abort(0): aborting sp ffff81022c861fc0 from RISC. pid=595877.
[82606.824244] qla2xxx 0000:10:00.0: scsi(0:0:0): Abort command issued -- 1 917a5 2002.
[82650.282751] qla2xxx_eh_abort(0): aborting sp ffff81022c861c00 from RISC. pid=595881.
[82651.811281] qla2xxx 0000:10:00.0: scsi(0:0:0): Abort command issued -- 1 917a9 2002.
[82667.411597] scsi(0): qla2x00_port_login()
[82667.431641] scsi(0): qla2x00_port_login - end
[82712.842672] qla2xxx_eh_abort(0): aborting sp ffff81022b2ad740 from RISC. pid=595894.
[82712.842650] qla2xxx 0000:10:00.0: scsi(0:0:0): Abort command issued -- 1 917b6 2002.
[82712.843007] qla2xxx_eh_abort(0): aborting sp ffff81022b2ad2c0 from RISC. pid=595895.
[82712.991293] qla2xxx 0000:10:00.0: scsi(0:0:0): Abort command issued -- 1 917b7 2002.
[84403.747400] scsi(0): qla2x00_port_login()
[84404.660916] scsi(0): qla2x00_port_login - end
[84448.740414] qla2xxx_eh_abort(0): aborting sp ffff81022b2ad840 from RISC. pid=595904.
[84449.886845] qla2xxx 0000:10:00.0: scsi(0:0:0): Abort command issued -- 1 917c0 2002.
[84463.923115] qla2xxx_eh_abort(0): aborting sp ffff81022b2ad300 from RISC. pid=595904.
[84466.166877] qla2xxx 0000:10:00.0: scsi(0:0:0): Abort command issued -- 1 917c0 2002.
[84466.166885] qla2xxx_eh_abort(0): aborting sp ffff81022b2ad2c0 from RISC. pid=595905.
[84466.170952] qla2xxx 0000:10:00.0: scsi(0:0:0): Abort command issued -- 1 917c1 2002.
[84481.649627] qla2xxx_eh_abort(0): aborting sp ffff81022b2ad940 from RISC. pid=595905.
[84482.774711] qla2xxx 0000:10:00.0: scsi(0:0:0): Abort command issued -- 1 917c1 2002.
[84482.774720] qla2xxx 0000:10:00.0: scsi(0:0:0): DEVICE RESET ISSUED.
[84512.299381] qla2xxx 0000:10:00.0: scsi(0:0:0): DEVICE RESET FAILED: Task management failed.
[84512.299384] qla2xxx 0000:10:00.0: scsi(0:0:0): TARGET RESET ISSUED.
[84542.131135] qla2xxx 0000:10:00.0: scsi(0:0:0): TARGET RESET FAILED: Task management failed.
[84542.131135] qla2xxx 0000:10:00.0: scsi(0:0:0): LOOP RESET ISSUED.
[84542.394627] scsi(0): qla2x00_reset_marker()
[84542.394632] scsi(0): qla2x00_loop_resync()
[84542.518971] scsi(0): qla2x00_loop_resync - end
[84543.551599] qla2xxx 0000:10:00.0: qla2xxx_eh_bus_reset: reset succeded
[85254.174114] qla2xxx_eh_abort(0): aborting sp ffff81022b2ad580 from RISC. pid=595917.
[85256.097541] qla2xxx 0000:10:00.0: scsi(0:0:0): Abort command issued -- 1 917cd 2002.
[86166.608312] scsi(0): qla2x00_port_login()
[86166.700031] scsi(0): qla2x00_port_login - end
[86214.126536] qla2xxx_eh_abort(0): aborting sp ffff81022b2adac0 from RISC. pid=595934.
[86214.333588] qla2xxx 0000:10:00.0: scsi(0:0:0): Abort command issued -- 1 917de 2002.
[86261.741684] qla2xxx_eh_abort(0): aborting sp ffff81022b2ada80 from RISC. pid=595939.
[86261.743252] qla2xxx 0000:10:00.0: scsi(0:0:0): Abort command issued -- 1 917e3 2002.


(qla2xxx module has been loaded with qla2xmaxqdepth=4 and extended_error_logging=1 parameters)

Does anyone have any ideas what could be the problem?

Thanks in advance
Marcin
Last edited by marcink8563 on 2009-11-05 13:01, edited 1 time in total.
marcink8563
 
Posts: 2
Joined: 2009-11-01 18:49

Re: QLA2XXX driver on Debian, Abort command issued

Postby marcink8563 » 2009-11-05 12:50

It looks like problem was caused by failing hardware.
HP engeneers performed test and as a result some components have been replaced.
No problems afterwards.

Thread can be marked as solved.
marcink8563
 
Posts: 2
Joined: 2009-11-01 18:49


Return to Hardware

Who is online

Users browsing this forum: corban and 6 guests

fashionable