Debian User Forums

Yes I have, psad's dev had me install a patch and recompile it. wonder if I can apt build the entire system ... hmmmm

Well I added comments to my sources.list and I now get: apt-get clean DebianTim:~# apt update Get:1 file:/var/cache/apt-build/repository apt-build InRelease Ign:1 file:/var/cache/apt-build/repository apt-build InRelease Get:2 file:/var/cache/apt-build/repository apt-build Release [1,530 B] Get:2 fil...

got it, changed everything to testing and commented out the firmware part. I added the file it needs for the firmware. Output looks like this now: # apt update Get:1 file:/var/cache/apt-build/repository apt-build InRelease Ign:1 file:/var/cache/apt-build/repository apt-build InRelease Get:2 file:/va...

So change the parts that say Bookworm to testing and comment out the firmware update section? that was done to comply with section 5.1.1 of Bookworm release notes

Hi All, I know this is a "dumb question" however; when I run apt update or apt-get update I get a bunch of these warnings: W: Target Packages (main/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:15 and /etc/apt/sources.list:25 W: Target Packages (main/binary-al...

top -Hs top - 18:41:37 up 1 day, 9:47, 1 user, load average: 1.65, 1.70, 1.89 Threads: 1002 total, 2 running, 1000 sleeping, 0 stopped, 0 zombie %Cpu(s): 86.3 us, 13.1 sy, 0.0 ni, 0.0 id, 0.0 wa, 0.0 hi, 0.6 si, 0.0 st MiB Mem : 6907.9 total, 699.1 free, 4210.3 used, 1998.6 buff/cache MiB Swap: 143...

okay, so in `/etc/environment.d/` there's two files. 90-atk-adaptor.conf which has GTK_MODULES=${GTK_MODULES:+$GTK_MODULES:}gail:atk-bridge in it and a file named 90qt-ally,conf which has QT_ACCESSIBILITY=1 in that. `/usr/lib/environment.d/` has two files, 99-enviroment.conf that is empty and 990-sn...

To disable the radeonsi Mesa driver add these lines to ~/.config/environment.d/mesa.conf:

okay what if that folder doesn't exist (environment.d) in the users home folder, create it? I'm on Gnome Classic if that matters and yes I have show hidden checked.

Well it spits out: glxinfo -B name of display: :0 display: :0 screen: 0 direct rendering: Yes Extended renderer info (GLX_MESA_query_renderer): Vendor: AMD (0x1002) Device: AMD KAVERI (LLVM 14.0.4, DRM 2.50, 5.18.0-2-rt-amd64) (0x1315) Version: 22.0.5 Accelerated: yes Video memory: 1024MB Unified me...

Hi All, First I'd like to apologize if this isn't in the right part of the forums, but I wasn't sure where else to ask this. So, the short (hopefully) version is: I have an issue where WebKitWebProcess takes my CPU to 100% usage when I check my local mail. I contacted the Evolution mailing list and ...

Aka: redo the vm correctly. Got it

okay, if it's not there under macvtap just create it?

okay well that's installed. I'm assuming via the GUI I can create a new connection. My choices are NAT, Routed, Open, Isolated, SR-IOV Pool, default is the VIRBR0

okay I'm confused, I had a working connection. I was able to install Debian Testing as a net install so it worked once. If I run ip addr show it shows 5: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000 link/ether 52:54:00:f4:b8:83 brd ff:ff:ff:ff...

Thanks, I'm assuming I'd un-comment the option I need?
Also the file that is /was edited is in /etc/default/grub making this will override boot time defaults?

If you care, it is simpler to put this in /etc/modprobe.d

okay as it's own file? I currently have alsa.base.conf, amd64-microcode-blacklist.conf, dkms.conf, and oss-compat.conf so would I create a file amdgpu.conf and add that to it or????

Well, unbelievably I fixed it. I went in and changed the line in/etc/default/grub to read: GRUB_CMDLINE_LINUX_DEFAULT="quiet amdgpu.cik_support=1 radeon.cik_support=1" before it read : GRUB_CMDLINE_LINUX_DEFAULT="quiet radeon.cik_support=0 amdgpu.cik_support=1 " so apparently mak...

yeah I don't have an output listed either sudo dmesg |grep DMI [sudo] password for tmick: [ 0.000000] DMI: MSI MS-7721/A68HM-E33 V2 (MS-7721), BIOS V8.4 08/10/2016 [ 0.259240] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 2.225957] [drm] HDMI-A-1 [ 11.399740] input: HDA ATI HDMI HDMI/DP,pcm=3 as /d...

well I looked and tried filtering the search in the link FreewheelinFrank posted and it might have changed. If I run sudo dmesg | grep "audio" [ 11.462600] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 11.462616] snd_hda_codec_r...

yes and I wonder if that changed between Kernel 5.15 and Kernel 5.18 (which I'm on) or how to make it start running.