Debian User Forums

Hi there,

Thanks for the suggestion. Unfortunately if I remove that line the system automatically goes back to the snd_hda_intel driver.

Hi there, Thanks for the suggestion. Unfortunately it wasn't my lucky day. I updated everything to bookworm which had linux kernel 5.14 with and sof-firmware 1.9. I get a similar error to before so I'm stumped now with what to do. I'll keep digging and see where it leads me. Here is the output that ...

Hi there. I did some more digging over the weekend and I saw someone on an arch forum did the following command to get the logs for the sound card: sudo dmesg | grep -iE 'snd|sof' I did that and the output I got was the following: sudo dmesg | grep -iE 'snd|sof' [ 1.371172] PCI-DMA: Using software b...

Hi again,

The alsa-ucm-conf package is definitely installed but I can't figure it out. I'll to keep going for now. If anyone could help that would be greatly appreciated. Thanks very much.

Hi again, I noticed that with the sof-audio-pci driver enabled it doesn't show any card information for that sound card. So I have disabled the sof-audio-pci driver and here are the outputs with the snd_hda_intel driver. Let me know if you need anything else. Thanks and good luck. aplay -l **** List...

Hi there, Thanks for that. Here is the output from those commands: aplay -l **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #...

Hi there, Thanks very much for your help. I'm getting somewhere now. I added options snd-intel-dspcfg dsp_driver=3 to /etc/modprobe.d/alsa.conf and restarted the PC. The sof-audio-pci driver is being loaded now after a reboot but bullseye isn't recognising the sound card at all now in the pavucontro...

Hi there, Thanks very much for that. Here is the output from the command: lspci -knn 00:00.0 Host bridge [0600]: Intel Corporation 11th Gen Core Processor Host Bridge/DRAM Registers [8086:9a14] (rev 01) DeviceName: WiFi Subsystem: Intel Corporation 11th Gen Core Processor Host Bridge/DRAM Registers ...

Hi there,

Thanks very much for that. I've tried that but no success sorry. Do I need to do a modprobe command or add something to a config file as I think the old sound driver is still being loaded. Thanks again.


Craig

Hi there,

Thanks very much for that. I've installed the driver but I still can't see the IEC958 (S/PDIF) option coming up. Is there anything I need to do to make sure the driver is loaded correctly? Thanks again.


Craig

Hi there, Thanks again for your help. I can definitely confirm that the dropdown doesn't contain S/PDIF or IEC958 options. Embedding the images doesn't work for me so go to the following links to see what is showing: http://craigwilliamson.kiwi/Pulseaudio1.png http://craigwilliamson.kiwi/Pulseaudio2...

Hi there, Thanks very much for the help. Here are the outputs you wanted. Let me know if you need anything else. dmesg | grep firmware [ 1.973840] i915 0000:00:02.0: firmware: direct-loading firmware i915/tgl_dmc_ver2_08.bin [ 1.974256] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl...

Hi all, I can't get the S/PDIF (IEC958) audio working with the Intel NUC 11 Enthusiast under bullseye. I have unmuted all the S/PDIF channels in alsamixer but it won't enable the IEC958 option in pulseaudio volume control app. Also if I run iecset I get the following response: control "IEC958 P...

That's really awesome. I'm glad everything is working for you now.

Hi there, Apologies for the late reply. My secondary power settings are as follows: Power Sense = ticked After Power Failure = Stay Off Deep S4/S5 = unticked Wake on LAN from S4/S5 = Power On - Normal Boot Wake System from S5 = unticked USB S4/S5 Power = unticked Wake from Thunderbolt device = untic...

I'm not sure why but the edit button isn't appearing for the first post for some reason. The thread can be closed but I can't do it sorry. Thanks again for your help.

Hi Martijn, Sorry for the late reply. What I did in the BIOS was the following: 1. Go to Power tab. 2. Enable the 'Max Performance Enabled' setting i.e. tick the checkbox 3. Set the 'Intel Dynamic Power Technology' to Off. I didn't change any other setting but if those don't work for you let me know...

Hi all, I think I've resolved the issue with the Nvidia drivers. I did some searching and found that other people have had a similar issue with AMD processors. Their issue was to do with power management in the BIOS. What they did was to basically disable power management and that fixed their proble...

Hi there, I have switched over to the Nouveau driver for now and that seems to be far more stable than the official Nvidia drivers. I'll see if I can get more information about what is going on with the Nvidia drivers online. I did get one kernel crash using the Nouveau drivers when trying to use Go...

Hi Aki, Thanks very much for getting back to me. I wasn't able to get the logs from the time it crashed to getting the Xorg logs but here is the logs from the last time it crashed. Note it isn't everything due to the character limits. Let me know if you need anything else. ... Aug 21 09:52:39 craig-...