I'm new to this forum.
I recently assembled a new PC (see below) and I wanted to use it as a server, so I decided to install a server version of debian (https://www.debian.org/distrib/netinst=> amd64).
When I try to install it, it shows an issue with missing drivers, but I don't know if this has something to do with the main problem. I also tried to put the CD with the drivers in (the one that comes with the motherboard), but nothing changed.
However, the main problem is another. In fact, when I select the partitions' configuration and I confirm, I always end up with the same error: The attempt to mount a file system with type ext4 in SCSI11 (0,0,0), partition #1 (sdh) at / failed
What I would like to do is set a RAID0 for the 2 pairs of HDDs (4 in total) and install the OS on my M.2 SSD (see below). I'm able to install the OS on one of the for HDDs, but not on the SSD, I always end up with the same error. Here are some things I've tried:
- Boot directly, without UEFI
- Leave the 4 HDDs with freespace, not RAID0
- Select the option "yes, format it"
- Select all the mount option (for example "noatime")
----- Here's my setup -----
motherboard: https://www.digitec.ch/en/s1/product/ms ... ds-9117471MSI B450 Gaming Pro Carbon AC (AM4, AMD B450, ATX)
CPU: https://www.microspot.ch/de/computer-ga ... 0001504602 AMD Ryzen 5 2600 / 3.4 GHz Prozessor (is not 3.9 GHz as they say)
SSD: https://www.digitec.ch/en/s1/product/ki ... d-10628775 Kingston A400 (120GB, M.2 2280)
RAM: https://www.digitec.ch/en/s1/product/co ... ry-8280153 Corsair Vengeance LPX (2x, 8GB, DDR4-3000, DIMM 288)
HDDs: 2x https://www.digitec.ch/en/s1/product/wd ... s-10284183 WD Red 2x 4TB Set (8TB, 3.5")
Graphic card: https://www.digitec.ch/en/s1/product/xf ... s-11053768 XFX RX 570 RS XXX Edition (8GB)
I've some experience in Linux world, but I'm a newbie in the hardware world. And sorry if my English is not perfect
Thank you in advance!!