Scheduled Maintenance: We are aware of an issue with Google, AOL, and Yahoo services as email providers which are blocking new registrations. We are trying to fix the issue and we have several internal and external support tickets in process to resolve the issue. Please see: viewtopic.php?t=158230
move my installation from buster to bulleyes
Re: move my installation from buster to bulleyes
It's recommended to do a full backup of your disk (or at least your important data) before proceeding.
Edit the file /etc/apt/sources.list
command to do this:
or if you prefer nano:
Replace the contents with this (assuming you also want the non-free packages):
(this omits the deb-src lines. If you need them, duplicate each line but with deb-src instead of deb at the start)
Run the following:
If there are any errors here, you have a problem with the contents of sources.list.
Before confirming the upgrade and full-upgrade operations, read carefully what it proposes to do in case there are problems.
After there are no more packages to update, reboot your system
Once everything seems to work ok, run this to clean some old packages that are no longer needed (read the list to make sure it's not removing anything important):
Good luck!
Here's a much more in depth guide if you're looking for more details.
https://www.debian.org/releases/bullsey ... ng.en.html
Edit the file /etc/apt/sources.list
command to do this:
Code: Select all
sudo vi /etc/apt/sources.list
Code: Select all
sudo nano /etc/apt/sources.list
Code: Select all
deb http://deb.debian.org/debian bullseye main contrib non-free
deb http://deb.debian.org/debian-security/ bullseye-security main contrib non-free
deb http://deb.debian.org/debian bullseye-updates main contrib non-free
deb http://deb.debian.org/debian bullseye-backports main contrib non-free
Run the following:
Code: Select all
sudo apt update
Code: Select all
sudo apt upgrade
Code: Select all
sudo apt full-upgrade
After there are no more packages to update, reboot your system
Once everything seems to work ok, run this to clean some old packages that are no longer needed (read the list to make sure it's not removing anything important):
Code: Select all
sudo apt autoremove
Here's a much more in depth guide if you're looking for more details.
https://www.debian.org/releases/bullsey ... ng.en.html
- craigevil
- Posts: 5391
- Joined: 2006-09-17 03:17
- Location: heaven
- Has thanked: 28 times
- Been thanked: 39 times
Re: move my installation from buster to bulleyes
Real only need Main and Security. Backports is probably pretty empty for now.
That is all you need for repos.
Code: Select all
# Bullseye Main https://www.debian.org/releases/bullseye/amd64/release-notes/ch-upgrading.en.html
deb https://deb.debian.org/debian/ bullseye main contrib non-free
# deb-src https://deb.debian.org/debian/ bullseye main contrib non-free
# Bullseye Security https://www.debian.org/releases/bullseye/amd64/release-notes/ch-information.en.html#security-archive
deb https://deb.debian.org/debian-security bullseye-security main contrib non-free
# deb-src https://deb.debian.org/debian-security bullseye-security main contrib non-free
# Bullseye Backports https://backports.debian.org/
# deb https://deb.debian.org/debian/ bullseye-backports main contrib non-free
# deb-src https://deb.debian.org/debian/ bullseye-backports main contrib non-free
Raspberry PI 400 Distro: Raspberry Pi OS Base: Debian Sid Kernel: 5.15.69-v8+ aarch64 DE: MATE Ram 4GB
Debian - "If you can't apt install something, it isn't useful or doesn't exist"
My Giant Sources.list
Debian - "If you can't apt install something, it isn't useful or doesn't exist"
My Giant Sources.list
Re: move my installation from buster to bulleyes
I get an error
Code: Select all
apt full-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt --fix-broken install' to correct these.
The following packages have unmet dependencies:
blueman : Depends: python3 (< 3.8) but 3.9.2-3 is installed
bsdmainutils : Depends: ncal
frozen-bubble : Depends: perlapi-5.28.0 but it is not installable
gedit : Depends: python3.7 but it is not installable
glade : Depends: libgladeui-2-6 (>= 3.22.0) but it is not installable
gstreamer1.0-gl : Breaks: gstreamer1.0-plugins-bad (< 1.15.1) but 1.14.4-1+deb10u2 is installed
gstreamer1.0-plugins-bad : Depends: libgstreamer-plugins-bad1.0-0 (= 1.14.4-1+deb10u2) but 1.18.4-3 is installed
gstreamer1.0-plugins-base : Breaks: gstreamer1.0-plugins-bad (< 1.15.1) but 1.14.4-1+deb10u2 is installed
gstreamer1.0-plugins-good : Breaks: gstreamer1.0-plugins-bad (< 1.15.1) but 1.14.4-1+deb10u2 is installed
hplip : Depends: python3 (< 3.8) but 3.9.2-3 is installed
libalgorithm-diff-xs-perl : Depends: perlapi-5.28.0 but it is not installable
libapache2-mod-perl2 : Depends: perlapi-5.28.0 but it is not installable
libautovivification-perl : Depends: perlapi-5.28.0 but it is not installable
libb-hooks-op-check-perl : Depends: perlapi-5.28.0 but it is not installable
libbsd-resource-perl : Depends: perlapi-5.28.0 but it is not installable
libc-dev-bin : Depends: libc6 (< 2.29) but 2.31-13 is installed
libc6-dbg : Depends: libc6 (= 2.28-10) but 2.31-13 is installed
libc6-dev : Depends: libc6 (= 2.28-10) but 2.31-13 is installed
libc6-i386 : Depends: libc6 (= 2.28-10) but 2.31-13 is installed
libcairo-gobject-perl : Depends: perlapi-5.28.0 but it is not installable
libcairo-perl : Depends: perlapi-5.28.0 but it is not installable
libclass-c3-xs-perl : Depends: perlapi-5.28.0 but it is not installable
libclass-xsaccessor-perl : Depends: perlapi-5.28.1 but it is not installable
Depends: perl (< 5.28.2~) but 5.32.1-4+deb11u1 is installed
libcommon-sense-perl : Depends: perlapi-5.28.1 but it is not installable
Depends: perl (< 5.28.2~) but 5.32.1-4+deb11u1 is installed
libcompress-bzip2-perl : Depends: perlapi-5.28.0 but it is not installable
libdate-simple-perl : Depends: perlapi-5.28.1 but it is not installable
libdatetime-perl : Depends: perlapi-5.28.0 but it is not installable
libdbd-mysql-perl : Depends: perlapi-5.28.1 but it is not installable
libdbd-pg-perl : Depends: perlapi-5.28.1 but it is not installable
libdbi-perl : Depends: perlapi-5.28.1 but it is not installable
libdevel-callchecker-perl : Depends: perlapi-5.28.1 but it is not installable
libdevel-caller-perl : Depends: perlapi-5.28.0 but it is not installable
libdevel-lexalias-perl : Depends: perlapi-5.28.0 but it is not installable
libencode-eucjpms-perl : Depends: perlapi-5.28.0 but it is not installable
libencode-hanextra-perl : Depends: perlapi-5.28.0 but it is not installable
libencode-jis2k-perl : Depends: perlapi-5.28.0 but it is not installable
libfcgi-perl : Depends: perlapi-5.28.0 but it is not installable
libfile-fcntllock-perl : Depends: perlapi-5.28.0 but it is not installable
libges-1.0-0 : Depends: gstreamer1.0-plugins-bad (>= 1.18.0) but 1.14.4-1+deb10u2 is installed
libglib-perl : Depends: perlapi-5.28.1 but it is not installable
libgstreamer-plugins-base1.0-0 : Breaks: gstreamer1.0-plugins-bad (< 1.15.1) but 1.14.4-1+deb10u2 is installed
libgtk2-perl : Depends: perlapi-5.28.0 but it is not installable
libhtml-parser-perl : Depends: perlapi-5.28.0 but it is not installable
libimage-magick-q16-perl : Depends: perlapi-5.28.1 but it is not installable
libio-pty-perl : Depends: perlapi-5.28.0 but it is not installable
libjson-xs-perl : Depends: perlapi-5.28.0 but it is not installable
liblist-moreutils-perl : Depends: perlapi-5.28.0 but it is not installable
liblocale-gettext-perl : PreDepends: perlapi-5.28.0 but it is not installable
libnet-dbus-perl : Depends: perlapi-5.28.0 but it is not installable
libnet-dns-sec-perl : Depends: perlapi-5.28.1 but it is not installable
libnet-libidn-perl : Depends: perlapi-5.28.0 but it is not installable
libnet-ssleay-perl : Depends: perlapi-5.28.0 but it is not installable
libpackage-stash-xs-perl : Depends: perlapi-5.28.1 but it is not installable
libpadwalker-perl : Depends: perlapi-5.28.0 but it is not installable
libpango-perl : Depends: perlapi-5.28.0 but it is not installable
libparams-classify-perl : Depends: perlapi-5.28.0 but it is not installable
libparams-util-perl : Depends: perlapi-5.28.0 but it is not installable
libparams-validate-perl : Depends: perlapi-5.28.0 but it is not installable
libperlio-utf8-strict-perl : Depends: perlapi-5.28.0 but it is not installable
libposix-strptime-perl : Depends: perlapi-5.28.0 but it is not installable
libqt4-xml : Depends: libqtcore4 (= 4:4.8.7+dfsg-18+deb10u1) but it is not installable
libqtdbus4 : Depends: libqtcore4 (= 4:4.8.7+dfsg-18+deb10u1) but it is not installable
libref-util-xs-perl : Depends: perlapi-5.28.0 but it is not installable
librrds-perl : Depends: perlapi-5.28.1 but it is not installable
libsdl-perl : Depends: perlapi-5.28.0 but it is not installable
libsocket6-perl : Depends: perlapi-5.28.0 but it is not installable
libsort-key-perl : Depends: perlapi-5.28.0 but it is not installable
libsub-identify-perl : Depends: perlapi-5.28.0 but it is not installable
libsub-name-perl : Depends: perlapi-5.28.0 but it is not installable
libterm-readkey-perl : Depends: perlapi-5.28.1 but it is not installable
libtext-bibtex-perl : Depends: perlapi-5.28.0 but it is not installable
libtext-charwidth-perl : Depends: perlapi-5.28.0 but it is not installable
libtext-csv-xs-perl : Depends: perlapi-5.28.1 but it is not installable
libtext-iconv-perl : Depends: perlapi-5.28.0 but it is not installable
libunicode-linebreak-perl : Depends: perlapi-5.28.1 but it is not installable
libvariable-magic-perl : Depends: perlapi-5.28.0 but it is not installable
libxau-dev : Depends: libxau6 (= 1:1.0.8-1+b2) but 1:1.0.9-1 is installed
libxml-libxml-perl : Depends: perlapi-5.28.1 but it is not installable
libxml-libxslt-perl : Depends: perlapi-5.28.0 but it is not installable
libxml-parser-perl : Depends: perlapi-5.28.1 but it is not installable
libzlui-qt4 : Depends: libqtcore4 (>= 4:4.7.0~beta1) but it is not installable
Depends: libqtgui4 (>= 4:4.5.3) but it is not installable
mailutils : Depends: mailutils-common (= 1:3.10-3) but 1:3.5-4 is installed
Depends: libmailutils7 but it is not installed
openssh-sftp-server : Depends: openssh-client (= 1:7.9p1-10+deb10u2)
pitivi : Depends: gstreamer1.0-plugins-bad (>= 1.18.0) but 1.14.4-1+deb10u2 is installed
python-gst-1.0 : Depends: python-gi (>= 3.8) but it is not installable
python-pyqt5.qtsvg : Depends: python-pyqt5 (= 5.11.3+dfsg-1+b3) but it is not installable
python3-brlapi : Depends: python3 (< 3.8) but 3.9.2-3 is installed
python3-dbus : Depends: python3 (< 3.8) but 3.9.2-3 is installed
python3-kiwisolver : Depends: python3 (< 3.8) but 3.9.2-3 is installed
python3-openshot : Depends: python3 (< 3.8) but 3.9.2-3 is installed
python3-uno : Depends: python3 (< 3.8) but 3.9.2-3 is installed
Depends: python3.7 but it is not installable
radiotray : Depends: python-gi but it is not installable
texinfo : Depends: perlapi-5.28.0 but it is not installable
E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution).
Re: move my installation from buster to bulleyes
Were you up to date with buster before trying this? Maybe go back to the original Buster sources.list and repeat the apt commands.
https://gist.github.com/ishad0w/6ce1eb5 ... 923577426a
Actually, that's probably not going to work if you've already upgraded some packages to bullseye with npm update.
https://gist.github.com/ishad0w/6ce1eb5 ... 923577426a
Actually, that's probably not going to work if you've already upgraded some packages to bullseye with npm update.
- FreewheelinFrank
- Global Moderator
- Posts: 2109
- Joined: 2010-06-07 16:59
- Has thanked: 38 times
- Been thanked: 230 times
Re: move my installation from buster to bulleyes
Please post contents of etc/apt/sources.list.
Did you try apt --fix-broken install and what did it say?
Please note, posting the same question in three different places is not helpful: people trying to help may not notice developments in another place and may waste their time on advice that has already been given elsewhere.
Edit: case in point viewtopic.php?p=741026#p741026
Did you try apt --fix-broken install and what did it say?
Please note, posting the same question in three different places is not helpful: people trying to help may not notice developments in another place and may waste their time on advice that has already been given elsewhere.
Edit: case in point viewtopic.php?p=741026#p741026
Re: move my installation from buster to bulleyes
It just beggars belief that some people running Debian don't know how to search for upgrade instructions.
Here you go, OP.
https://www.debian.org/releases/stable/ ... ng.en.html
It looks to me like you didn't update Buster beforehand.
Here is a simple version of how to upgrade.
Replace all "buster" entries with "bullseye" in and amend the security repo. Like so:
Here you go, OP.
https://www.debian.org/releases/stable/ ... ng.en.html
It looks to me like you didn't update Buster beforehand.
Here is a simple version of how to upgrade.
Code: Select all
apt update
Code: Select all
apt upgrade
Code: Select all
apt autoremove
Code: Select all
/etc/apt/sources.list
Code: Select all
deb http://deb.debian.org/debian bullseye main contrib non-free
deb-src http://deb.debian.org/debian bullseye main contrib non-free
deb http://deb.debian.org/debian-security/ bullseye-security main contrib non-free
deb-src http://deb.debian.org/debian-security/ bullseye-security main contrib non-free
deb http://deb.debian.org/debian bullseye-updates main contrib non-free
deb-src http://deb.debian.org/debian bullseye-updates main contrib non-free
Code: Select all
apt upgrade --without-new-pkgs
Code: Select all
apt full-upgrade