Code: Select all
[ 1.016190] ACPI: EC: interrupt unblocked
[ 1.016192] ACPI: EC: event unblocked
[ 1.016201] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 1.016202] ACPI: EC: GPE=0x6e
[ 1.016203] ACPI: \_SB_.PC00.LPCB.ECDV: Boot DSDT EC initialization complete
[ 1.016204] ACPI: \_SB_.PC00.LPCB.ECDV: EC: Used to handle transactions and events
[ 1.016252] iommu: Default domain type: Translated
[ 1.016260] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 1.016260] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 1.016260] pci 0000:00:02.0: vgaarb: bridge control possible
[ 1.016260] vgaarb: loaded
[ 1.016260] EDAC MC: Ver: 3.0.0
[ 1.016260] Registered efivars operations
[ 1.016260] NetLabel: Initializing
[ 1.016260] NetLabel: domain hash size = 128
[ 1.016260] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.016260] NetLabel: unlabeled traffic allowed by default
[ 1.016260] PCI: Using ACPI for IRQ routing
[ 1.026046] PCI: pci_cache_line_size set to 64 bytes
[ 1.026190] pci 0000:00:1f.5: can't claim BAR 0 [mem 0xfe010000-0xfe010fff]: no compatible bridge window
[ 1.026293] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 1.026294] e820: reserve RAM buffer [mem 0x56c77000-0x57ffffff]
[ 1.026295] e820: reserve RAM buffer [mem 0x56ca9000-0x57ffffff]
[ 1.026295] e820: reserve RAM buffer [mem 0x5bf6f000-0x5bffffff]
[ 1.026296] e820: reserve RAM buffer [mem 0x61800000-0x63ffffff]
[ 1.026296] e820: reserve RAM buffer [mem 0x88f800000-0x88fffffff]
[ 1.026367] clocksource: Switched to clocksource tsc-early
[ 1.030731] VFS: Disk quotas dquot_6.6.0
[ 1.030740] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.030799] AppArmor: AppArmor Filesystem Enabled
[ 1.030805] pnp: PnP ACPI init
[ 1.030978] system 00:00: [io 0x0680-0x069f] has been reserved
[ 1.030980] system 00:00: [io 0x164e-0x164f] has been reserved
[ 1.030982] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.030990] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.031052] system 00:02: [io 0x1854-0x1857] has been reserved
[ 1.031053] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.031119] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.031149] pnp 00:04: Plug and Play ACPI device, IDs DLL0b19 PNP0f13 (active)
[ 1.031955] pnp 00:05: disabling [mem 0xc0000000-0xcfffffff] because it overlaps 0000:00:02.0 BAR 9 [mem 0x00000000-0xdfffffff 64bit pref]
[ 1.031970] system 00:05: [mem 0xfedc0000-0xfedc7fff] has been reserved
[ 1.031971] system 00:05: [mem 0xfeda0000-0xfeda0fff] has been reserved
[ 1.031972] system 00:05: [mem 0xfeda1000-0xfeda1fff] has been reserved
[ 1.031973] system 00:05: [mem 0xfed20000-0xfed7ffff] could not be reserved
[ 1.031974] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 1.031975] system 00:05: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 1.031976] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[ 1.031978] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.032754] system 00:06: [io 0x2000-0x20fe] has been reserved
[ 1.032755] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.033018] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.035468] pnp: PnP ACPI: found 8 devices
[ 1.040458] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.040493] NET: Registered protocol family 2
[ 1.040728] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 1.041756] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 1.042023] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 1.042254] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 1.042295] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.042382] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 1.042461] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 1.042512] NET: Registered protocol family 1
[ 1.042515] NET: Registered protocol family 44
[ 1.042518] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 1.042521] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
[ 1.042528] pci 0000:00:02.0: BAR 9: assigned [mem 0x4020000000-0x40ffffffff 64bit pref]
[ 1.042531] pci 0000:00:02.0: BAR 7: assigned [mem 0x4010000000-0x4016ffffff 64bit]
[ 1.042533] pci 0000:00:07.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 1.042534] pci 0000:00:07.1: BAR 13: assigned [io 0x6000-0x6fff]
[ 1.042536] pci 0000:00:15.0: BAR 0: assigned [mem 0x4017000000-0x4017000fff 64bit]
[ 1.042595] pci 0000:00:15.1: BAR 0: assigned [mem 0x4017001000-0x4017001fff 64bit]
[ 1.042609] pci 0000:00:1f.5: BAR 0: assigned [mem 0x70800000-0x70800fff]
[ 1.042620] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00080000 pref]
[ 1.042621] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
[ 1.042622] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.042624] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 1.042626] pci 0000:00:01.0: bridge window [mem 0xbe000000-0xbeffffff]
[ 1.042628] pci 0000:00:01.0: bridge window [mem 0x6000000000-0x6101ffffff 64bit pref]
[ 1.042631] pci 0000:00:07.0: PCI bridge to [bus 02-52]
[ 1.042633] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
[ 1.042635] pci 0000:00:07.0: bridge window [mem 0x98000000-0xba0fffff]
[ 1.042637] pci 0000:00:07.0: bridge window [mem 0x6110000000-0x6145ffffff 64bit pref]
[ 1.042641] pci 0000:00:07.1: PCI bridge to [bus 53-a3]
[ 1.042642] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]
[ 1.042645] pci 0000:00:07.1: bridge window [mem 0x74000000-0x960fffff]
[ 1.042647] pci 0000:00:07.1: bridge window [mem 0x6150000000-0x6185ffffff 64bit pref]
[ 1.042651] pci 0000:00:1c.0: PCI bridge to [bus a4]
[ 1.042656] pci 0000:00:1c.0: bridge window [mem 0xbf000000-0xbf0fffff]
[ 1.042663] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.042664] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.042664] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.042665] pci_bus 0000:00: resource 7 [mem 0x70800000-0xbfffffff window]
[ 1.042666] pci_bus 0000:00: resource 8 [mem 0x4000000000-0x7fffffffff window]
[ 1.042667] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 1.042668] pci_bus 0000:01: resource 1 [mem 0xbe000000-0xbeffffff]
[ 1.042669] pci_bus 0000:01: resource 2 [mem 0x6000000000-0x6101ffffff 64bit pref]
[ 1.042670] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 1.042671] pci_bus 0000:02: resource 1 [mem 0x98000000-0xba0fffff]
[ 1.042671] pci_bus 0000:02: resource 2 [mem 0x6110000000-0x6145ffffff 64bit pref]
[ 1.042672] pci_bus 0000:53: resource 0 [io 0x6000-0x6fff]
[ 1.042673] pci_bus 0000:53: resource 1 [mem 0x74000000-0x960fffff]
[ 1.042674] pci_bus 0000:53: resource 2 [mem 0x6150000000-0x6185ffffff 64bit pref]
[ 1.042675] pci_bus 0000:a4: resource 1 [mem 0xbf000000-0xbf0fffff]
[ 1.042770] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.043131] PCI: CLS 0 bytes, default 64
[ 1.043155] Trying to unpack rootfs image as initramfs...
[ 1.489362] Freeing initrd memory: 41944K
[ 1.489383] DMAR: No ATSR found
[ 1.489447] DMAR: dmar0: Using Queued invalidation
[ 1.489450] DMAR: dmar1: Using Queued invalidation
[ 1.489588] pci 0000:00:00.0: Adding to iommu group 0
[ 1.489596] pci 0000:00:01.0: Adding to iommu group 1
[ 1.489601] pci 0000:00:02.0: Adding to iommu group 2
[ 1.489607] pci 0000:00:04.0: Adding to iommu group 3
[ 1.489615] pci 0000:00:06.0: Adding to iommu group 4
[ 1.489621] pci 0000:00:07.0: Adding to iommu group 5
[ 1.489627] pci 0000:00:07.1: Adding to iommu group 6
[ 1.489633] pci 0000:00:08.0: Adding to iommu group 7
[ 1.489641] pci 0000:00:0d.0: Adding to iommu group 8
[ 1.489646] pci 0000:00:0d.2: Adding to iommu group 8
[ 1.489651] pci 0000:00:0e.0: Adding to iommu group 9
[ 1.489665] pci 0000:00:12.0: Adding to iommu group 10
[ 1.489673] pci 0000:00:14.0: Adding to iommu group 11
[ 1.489678] pci 0000:00:14.2: Adding to iommu group 11
[ 1.489683] pci 0000:00:14.3: Adding to iommu group 12
[ 1.489691] pci 0000:00:15.0: Adding to iommu group 13
[ 1.489697] pci 0000:00:15.1: Adding to iommu group 13
[ 1.489704] pci 0000:00:16.0: Adding to iommu group 14
[ 1.489712] pci 0000:00:1c.0: Adding to iommu group 15
[ 1.489724] pci 0000:00:1f.0: Adding to iommu group 16
[ 1.489729] pci 0000:00:1f.3: Adding to iommu group 16
[ 1.489735] pci 0000:00:1f.4: Adding to iommu group 16
[ 1.489741] pci 0000:00:1f.5: Adding to iommu group 16
[ 1.489747] pci 0000:01:00.0: Adding to iommu group 17
[ 1.489755] pci 0000:a4:00.0: Adding to iommu group 18
[ 1.492028] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 1.492030] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.492031] software IO TLB: mapped [mem 0x000000004d7ab000-0x00000000517ab000] (64MB)
[ 1.492042] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26bef67878b, max_idle_ns: 440795293631 ns
[ 1.492106] clocksource: Switched to clocksource tsc
[ 1.492497] Initialise system trusted keyrings
[ 1.492502] Key type blacklist registered
[ 1.492527] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[ 1.492928] zbud: loaded
[ 1.493047] integrity: Platform Keyring initialized
[ 1.493048] Key type asymmetric registered
[ 1.493049] Asymmetric key parser 'x509' registered
[ 1.493052] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.493071] io scheduler mq-deadline registered
[ 1.493546] pcieport 0000:00:01.0: PME: Signaling with IRQ 122
[ 1.493692] pcieport 0000:00:07.0: PME: Signaling with IRQ 123
[ 1.493703] pcieport 0000:00:07.0: pciehp: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 1.493901] pcieport 0000:00:07.1: PME: Signaling with IRQ 124
[ 1.493912] pcieport 0000:00:07.1: pciehp: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
[ 1.494089] pcieport 0000:00:1c.0: PME: Signaling with IRQ 125
[ 1.494157] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.494172] efifb: probing for efifb
[ 1.494188] efifb: framebuffer at 0x4000000000, using 9024k, total 9024k
[ 1.494189] efifb: mode is 1920x1200x32, linelength=7680, pages=1
[ 1.494190] efifb: scrolling: redraw
[ 1.494191] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.495707] Console: switching to colour frame buffer device 240x75
[ 1.497176] fb0: EFI VGA frame buffer device
[ 1.497186] intel_idle: MWAIT substates: 0x10102020
[ 1.497304] Monitor-Mwait will be used to enter C-1 state
[ 1.497306] Monitor-Mwait will be used to enter C-2 state
[ 1.497307] Monitor-Mwait will be used to enter C-3 state
[ 1.497308] ACPI: \_SB_.PR00: Found 3 idle states
[ 1.497314] intel_idle: v0.5.1 model 0x9A
[ 1.497953] intel_idle: Local APIC timer is reliable in all C-states
[ 1.500501] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.500731] serial 0000:00:12.0: enabling device (0000 -> 0002)
[ 1.501006] hpet_acpi_add: no address or irqs in _CRS
[ 1.501036] Linux agpgart interface v0.103
[ 1.501055] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ 1.502221] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.502542] i8042: Warning: Keylock active
[ 1.504335] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.504341] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.504419] mousedev: PS/2 mouse device common for all mice
[ 1.504467] rtc_cmos 00:01: RTC can wake from S4
[ 1.505022] rtc_cmos 00:01: registered as rtc0
[ 1.505281] rtc_cmos 00:01: setting system clock to 2022-10-02T16:40:08 UTC (1664728808)
[ 1.505320] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 1.505332] intel_pstate: Intel P-state driver initializing
[ 1.506300] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.507107] intel_pstate: HWP enabled
[ 1.508343] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.508544] NET: Registered protocol family 10
[ 1.512970] Segment Routing with IPv6
[ 1.512996] mip6: Mobile IPv6
[ 1.513000] NET: Registered protocol family 17
[ 1.513088] mpls_gso: MPLS GSO support
[ 1.514705] microcode: sig=0x906a3, pf=0x80, revision=0x41b
[ 1.515485] microcode: Microcode Update Driver: v2.2.
[ 1.516480] resctrl: L2 allocation detected
[ 1.516494] resctrl: L2DATA allocation detected
[ 1.516501] resctrl: L2CODE allocation detected
[ 1.516515] IPI shorthand broadcast: enabled
[ 1.516523] sched_clock: Marking stable (1510112947, 6363352)->(1530392493, -13916194)
[ 1.516927] registered taskstats version 1
[ 1.516933] Loading compiled-in X.509 certificates
[ 1.533223] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.533244] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
[ 1.533322] zswap: loaded using pool lzo/zbud
[ 1.534023] Key type ._fscrypt registered
[ 1.534030] Key type .fscrypt registered
[ 1.534038] Key type fscrypt-provisioning registered
[ 1.534067] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.534425] integrity: Loading X.509 certificate: UEFI:db
[ 1.534446] integrity: Loaded X.509 cert 'Dell Inc.: Dell Bios DB Key: 637fa7a9f74471b406de0511557071fd41dd5487'
[ 1.534458] integrity: Loading X.509 certificate: UEFI:db
[ 1.534475] integrity: Loaded X.509 cert 'Dell Inc.: Dell Bios FW Aux Authority 2018: dd4df7c3f5ce7e5a77847915abc37b031f6b10bd'
[ 1.534489] integrity: Loading X.509 certificate: UEFI:db
[ 1.534506] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 1.534519] integrity: Loading X.509 certificate: UEFI:db
[ 1.534536] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 1.538406] Freeing unused kernel image (initmem) memory: 2648K
[ 1.573816] Write protecting the kernel read-only data: 22528k
[ 1.576291] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 1.578027] Freeing unused kernel image (rodata/data gap) memory: 616K
[ 1.590619] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.591475] Run /init as init process
[ 1.592360] with arguments:
[ 1.592361] /init
[ 1.592361] with environment:
[ 1.592362] HOME=/
[ 1.592362] TERM=linux
[ 1.592362] BOOT_IMAGE=/boot/vmlinuz-5.10.0-18-amd64
[ 1.647152] hid: raw HID events driver (C) Jiri Kosina
[ 1.648414] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 1.650476] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1.650770] vmd 0000:00:0e.0: PCI host bridge to bus 10000:e0
[ 1.651844] wmi_bus wmi_bus-PNP0C14:02: WQBC data block query control method not found
[ 1.652989] pci_bus 10000:e0: root bus resource [bus e0-ff]
[ 1.654283] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1.655567] pci_bus 10000:e0: root bus resource [mem 0xbc000000-0xbdffffff]
[ 1.658175] pci_bus 10000:e0: root bus resource [mem 0x6189102000-0x61891fffff 64bit]
[ 1.658246] rtsx_pci 0000:a4:00.0: enabling device (0000 -> 0002)
[ 1.659464] pci 10000:e0:06.0: [8086:464d] type 01 class 0x060400
[ 1.661740] pci 10000:e0:06.0: PME# supported from D0 D3hot D3cold
[ 1.663032] pci 10000:e0:06.0: PTM enabled (root), 4ns granularity
[ 1.664852] ACPI: bus type USB registered
[ 1.664977] pci 10000:e0:06.0: Adding to iommu group 9
[ 1.665940] usbcore: registered new interface driver usbfs
[ 1.666605] pci 10000:e0:06.0: Primary bus is hard wired to 0
[ 1.667503] usbcore: registered new interface driver hub
[ 1.668341] pci 10000:e1:00.0: [144d:a808] type 00 class 0x010802
[ 1.669223] usbcore: registered new device driver usb
[ 1.670264] ACPI: Lid Switch [LID0]
[ 1.670267] pci 10000:e1:00.0: reg 0x10: [mem 0xbc000000-0xbc003fff 64bit]
[ 1.670440] pci 10000:e1:00.0: Adding to iommu group 9
[ 1.670469] pci 10000:e0:06.0: PCI bridge to [bus e1]
[ 1.670471] pci 10000:e0:06.0: bridge window [io 0x0000-0x0fff]
[ 1.670472] pci 10000:e0:06.0: bridge window [mem 0xbc000000-0xbc0fffff]
[ 1.670475] pci 10000:e0:06.0: Primary bus is hard wired to 0
[ 1.670479] pci 10000:e0:06.0: BAR 14: assigned [mem 0xbc000000-0xbc0fffff]
[ 1.670480] pci 10000:e0:06.0: BAR 13: no space for [io size 0x1000]
[ 1.670481] pci 10000:e0:06.0: BAR 13: failed to assign [io size 0x1000]
[ 1.670482] pci 10000:e1:00.0: BAR 0: assigned [mem 0xbc000000-0xbc003fff 64bit]
[ 1.670490] pci 10000:e0:06.0: PCI bridge to [bus e1]
[ 1.670492] pci 10000:e0:06.0: bridge window [mem 0xbc000000-0xbc0fffff]
[ 1.670505] pcieport 10000:e0:06.0: can't derive routing for PCI INT D
[ 1.670505] pcieport 10000:e0:06.0: PCI INT D: no GSI
[ 1.670536] pcieport 10000:e0:06.0: PME: Signaling with IRQ 162
[ 1.670590] pcieport 10000:e0:06.0: AER: enabled with IRQ 162
[ 1.670656] vmd 0000:00:0e.0: Bound to PCI domain 10000
[ 1.678454] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1.678620] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 1.681734] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 1.682135] ACPI: Power Button [PBTN]
[ 1.682738] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1.695662] acpi PNP0C14:05: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1.696718] acpi PNP0C14:06: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1.699143] acpi PNP0C14:07: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1.700999] acpi PNP0C14:08: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 1.703871] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.704592] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.706563] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
[ 1.707142] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.708001] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[ 1.708055] nvme nvme0: pci function 10000:e1:00.0
[ 1.708701] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.709587] pcieport 10000:e0:06.0: can't derive routing for PCI INT A
[ 1.710399] usb usb1: Product: xHCI Host Controller
[ 1.711267] nvme 10000:e1:00.0: PCI INT A: not connected
[ 1.712116] usb usb1: Manufacturer: Linux 5.10.0-18-amd64 xhci-hcd
[ 1.712117] usb usb1: SerialNumber: 0000:00:14.0
[ 1.714018] hub 1-0:1.0: USB hub found
[ 1.714616] hub 1-0:1.0: 12 ports detected
[ 1.715897] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.716458] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.717024] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.717589] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[ 1.718388] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.718920] usb usb2: Product: xHCI Host Controller
[ 1.719444] usb usb2: Manufacturer: Linux 5.10.0-18-amd64 xhci-hcd
[ 1.719975] usb usb2: SerialNumber: 0000:00:14.0
[ 1.720812] hub 2-0:1.0: USB hub found
[ 1.721389] hub 2-0:1.0: 4 ports detected
[ 1.722256] usb: port power management may be unreliable
[ 1.723355] nvme nvme0: Shutdown timeout set to 10 seconds
[ 1.728776] nvme nvme0: 18/0/0 default/read/poll queues
[ 1.731789] nvme0n1: p1 p2 p3
[ 1.812957] ACPI Warning: \_SB.PC00.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200925/nsarguments-61)
[ 1.813619] ACPI Warning: \_SB.PC00.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20200925/nsarguments-61)
[ 1.814522] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 1.815150] VGA switcheroo: detected Optimus DSM method \_SB_.PC00.PEG1.PEGP handle
[ 1.815724] nouveau: detected PR support, will not use DSM
[ 1.816327] nouveau 0000:01:00.0: unknown chipset (b77000a1)
[ 1.930220] thunderbolt 0000:00:0d.2: 0: drom uid crc8 mismatch (expected: 0x0, got: 0xdb), aborting
[ 1.931611] thunderbolt 0-0: reading DROM failed
[ 1.933467] thunderbolt: probe of 0000:00:0d.2 failed with error -5
[ 1.992823] PM: Image not found (code -22)
[ 2.045769] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[ 2.078448] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.104332] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 2.134700] systemd[1]: Inserted module 'autofs4'
[ 2.173688] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 2.193827] systemd[1]: Detected architecture x86-64.
[ 2.196899] systemd[1]: Set hostname to <debian>.
[ 2.204980] usb 1-2: New USB device found, idVendor=25a7, idProduct=fa61, bcdDevice= 6.23
[ 2.206546] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.207541] usb 1-2: Product: 2.4G Receiver
[ 2.208480] usb 1-2: Manufacturer: Compx
[ 2.263273] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 2.275250] systemd[1]: Queued start job for default target Graphical Interface.
[ 2.277061] systemd[1]: Created slice system-getty.slice.
[ 2.277963] systemd[1]: Created slice system-modprobe.slice.
[ 2.279609] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 2.280742] systemd[1]: Created slice User and Session Slice.
[ 2.282283] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.283052] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.284405] systemd[1]: Reached target User and Group Name Lookups.
[ 2.285821] systemd[1]: Reached target Remote File Systems.
[ 2.287226] systemd[1]: Reached target Slices.
[ 2.288701] systemd[1]: Listening on Syslog Socket.
[ 2.290192] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 2.291577] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 2.293014] systemd[1]: Listening on Journal Audit Socket.
[ 2.294807] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.296227] systemd[1]: Listening on Journal Socket.
[ 2.297874] systemd[1]: Listening on udev Control Socket.
[ 2.299020] systemd[1]: Listening on udev Kernel Socket.
[ 2.300773] systemd[1]: Mounting Huge Pages File System...
[ 2.302185] systemd[1]: Mounting POSIX Message Queue File System...
[ 2.303672] systemd[1]: Mounting Kernel Debug File System...
[ 2.304989] systemd[1]: Mounting Kernel Trace File System...
[ 2.306616] systemd[1]: Starting Set the console keyboard layout...
[ 2.307994] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 2.309339] systemd[1]: Starting Load Kernel Module configfs...
[ 2.311105] systemd[1]: Starting Load Kernel Module drm...
[ 2.312550] systemd[1]: Starting Load Kernel Module fuse...
[ 2.313994] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 2.314007] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 2.316880] systemd[1]: Starting Journal Service...
[ 2.318090] fuse: init (API version 7.32)
[ 2.318674] systemd[1]: Starting Load Kernel Modules...
[ 2.320583] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 2.322271] systemd[1]: Starting Coldplug All udev Devices...
[ 2.324737] systemd[1]: Mounted Huge Pages File System.
[ 2.325622] systemd[1]: Mounted POSIX Message Queue File System.
[ 2.326738] lp: driver loaded but no devices found
[ 2.327855] EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
[ 2.329391] systemd[1]: Mounted Kernel Debug File System.
[ 2.329806] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 2.330538] ppdev: user-space parallel port driver
[ 2.331991] systemd[1]: Mounted Kernel Trace File System.
[ 2.333366] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 2.334715] systemd[1]: modprobe@configfs.service: Succeeded.
[ 2.334791] systemd[1]: Finished Load Kernel Module configfs.
[ 2.336507] systemd[1]: modprobe@drm.service: Succeeded.
[ 2.336583] systemd[1]: Finished Load Kernel Module drm.
[ 2.338516] systemd[1]: modprobe@fuse.service: Succeeded.
[ 2.338604] systemd[1]: Finished Load Kernel Module fuse.
[ 2.340284] systemd[1]: Finished Load Kernel Modules.
[ 2.341437] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 2.343212] systemd[1]: Mounting FUSE Control File System...
[ 2.344065] systemd[1]: Mounting Kernel Configuration File System...
[ 2.345439] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 2.345459] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 2.345824] systemd[1]: Starting Load/Save Random Seed...
[ 2.348464] systemd[1]: Starting Apply Kernel Variables...
[ 2.349533] systemd[1]: Starting Create System Users...
[ 2.350839] systemd[1]: Started Journal Service.
[ 2.356911] systemd-journald[393]: Received client request to flush runtime journal.
[ 2.359082] usb 2-1: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.63
[ 2.359635] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.360183] usb 2-1: Product: USB3.1 Hub
[ 2.360715] usb 2-1: Manufacturer: GenesysLogic
[ 2.363592] hub 2-1:1.0: USB hub found
[ 2.364423] hub 2-1:1.0: 4 ports detected
[ 2.413754] ACPI: AC Adapter [AC] (on-line)
[ 2.422540] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input3
[ 2.481782] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[ 2.632939] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.63
[ 2.633672] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.634346] usb 1-3: Product: USB2.1 Hub
[ 2.635022] usb 1-3: Manufacturer: GenesysLogic
[ 2.636708] hub 1-3:1.0: USB hub found
[ 2.637524] hub 1-3:1.0: 4 ports detected
[ 2.715704] usb 2-1.4: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[ 2.886544] usb 2-1.4: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 2.00
[ 2.887218] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.887906] usb 2-1.4: Product: AX88179A
[ 2.888577] usb 2-1.4: Manufacturer: ASIX
[ 2.889152] usb 2-1.4: SerialNumber: 00B6FD06
[ 2.917759] usb 1-6: new high-speed USB device number 4 using xhci_hcd
[ 3.080287] usb 1-6: New USB device found, idVendor=0c45, idProduct=6d1f, bcdDevice=13.61
[ 3.080965] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 3.081634] usb 1-6: Product: Integrated_Webcam_HD
[ 3.082489] usb 1-6: Manufacturer: Sonix Technology Co., Ltd.
[ 3.213775] usb 1-9: new full-speed USB device number 5 using xhci_hcd
[ 3.363335] usb 1-9: New USB device found, idVendor=27c6, idProduct=63ac, bcdDevice= 1.00
[ 3.364023] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.364686] usb 1-9: Product: Goodix USB2.0 MISC
[ 3.365291] usb 1-9: Manufacturer: Goodix Technology Co., Ltd.
[ 3.365957] usb 1-9: SerialNumber: UIDA472B21E_XXXX_MOC_B0
[ 3.493781] usb 1-10: new full-speed USB device number 6 using xhci_hcd
[ 3.609798] Adding 1000444k swap on /dev/nvme0n1p3. Priority:-2 extents:1 across:1000444k SSFS
[ 3.615022] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 3.616712] tpm_tis STM0125:00: 2.0 TPM (device-id 0x0, rev-id 78)
[ 3.643328] usb 1-10: New USB device found, idVendor=8087, idProduct=0033, bcdDevice= 0.00
[ 3.643921] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.679297] usbcore: registered new interface driver usbhid
[ 3.679298] usbhid: USB HID core driver
[ 3.691127] audit: type=1400 audit(1664728810.684:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=515 comm="apparmor_parser"
[ 3.691318] audit: type=1400 audit(1664728810.684:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=513 comm="apparmor_parser"
[ 3.693946] audit: type=1400 audit(1664728810.684:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=516 comm="apparmor_parser"
[ 3.693948] audit: type=1400 audit(1664728810.684:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=519 comm="apparmor_parser"
[ 3.696611] audit: type=1400 audit(1664728810.684:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=509 comm="apparmor_parser"
[ 3.696612] audit: type=1400 audit(1664728810.684:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=509 comm="apparmor_parser"
[ 3.696614] audit: type=1400 audit(1664728810.684:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=509 comm="apparmor_parser"
[ 3.696615] audit: type=1400 audit(1664728810.684:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=511 comm="apparmor_parser"
[ 3.696616] audit: type=1400 audit(1664728810.684:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=510 comm="apparmor_parser"
[ 3.829615] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[ 3.829642] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 6.716443] input: Dell WMI hotkeys as /devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input5
[ 6.799135] pstore: Using crash dump compression: deflate
[ 6.800182] pstore: Registered efi as persistent store backend
[ 6.867292] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.981202] cryptd: max_cpu_qlen set to 1000
[ 6.995706] AVX2 version of gcm_enc/dec engaged.
[ 6.996532] AES CTR mode by8 optimization enabled
[ 8.232486] dell_smm_hwmon: unable to get SMM Dell signature
[ 8.252814] mc: Linux media interface: v0.10
[ 8.260482] videodev: Linux video capture interface: v2.00
[ 8.268530] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6d1f)
[ 8.293693] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input7
[ 8.295554] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6d1f)
[ 8.299497] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.2/input/input8
[ 8.300279] usbcore: registered new interface driver uvcvideo
[ 8.301034] USB Video Class driver (1.1.1)
[ 8.404240] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:25A7:FA61.0001/input/input9
[ 8.409170] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 8.461951] hid-generic 0003:25A7:FA61.0001: input,hidraw0: USB HID v1.10 Keyboard [Compx 2.4G Receiver] on usb-0000:00:14.0-2/input0
[ 8.463391] input: Compx 2.4G Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:25A7:FA61.0002/input/input10
[ 8.464172] input: Compx 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:25A7:FA61.0002/input/input11
[ 8.464859] input: Compx 2.4G Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:25A7:FA61.0002/input/input12
[ 8.489640] Bluetooth: Core ver 2.22
[ 8.490542] NET: Registered protocol family 31
[ 8.491141] Bluetooth: HCI device and connection manager initialized
[ 8.491742] Bluetooth: HCI socket layer initialized
[ 8.492350] Bluetooth: L2CAP socket layer initialized
[ 8.492952] Bluetooth: SCO socket layer initialized
[ 8.507037] usbcore: registered new interface driver btusb
[ 8.521848] input: Compx 2.4G Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:25A7:FA61.0002/input/input13
[ 8.522932] hid-generic 0003:25A7:FA61.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Compx 2.4G Receiver] on usb-0000:00:14.0-2/input1
[ 8.842081] ax88179_178a 2-1.4:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0040: -32
[ 9.152707] ax88179_178a 2-1.4:1.0 eth0: register 'ax88179_178a' at usb-0000:00:14.0-1.4, ASIX AX88179 USB 3.0 Gigabit Ethernet, f8:e4:3b:b6:fd:06
[ 9.197193] usbcore: registered new interface driver ax88179_178a
[ 9.205103] ax88179_178a 2-1.4:1.0 enxf8e43bb6fd06: renamed from eth0
[ 9.845271] ax88179_178a 2-1.4:1.0 enxf8e43bb6fd06: Failed to read reg index 0x0040: -32
[ 13.068969] ax88179_178a 2-1.4:1.0 enxf8e43bb6fd06: ax88179 - Link status is: 1
[ 13.273778] IPv6: ADDRCONF(NETDEV_CHANGE): enxf8e43bb6fd06: link becomes ready
[ 64.739428] snd_hda_intel 0000:00:1f.3: couldn't bind with audio component
[ 64.777653] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC289: line_outs=2 (0x14/0x17/0x0/0x0/0x0) type:speaker
[ 64.778907] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 64.780545] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 64.781476] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 64.782341] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 64.783139] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 64.784253] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1b
[ 64.784856] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 64.839776] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15