About: Missing Required Dependencies
cups is installed and running
libcups2 is installed
gtk2-engines-pixbuf is installed
Missing Optional Dependencies
'python3-dbus.mainloop.qt' package is missing/incompatible
but python3-dbus.mainloop.pyqt5 is installed
I think the problem is
error: 'python3-pyqt4' package is missing/incompatible
I can not find it in the repository.
That said here is my
Code: Select all
hp-check -t
Saving output in log file: /home/greg/.local/share/Trash/files/hp-testing/hp-check.log
HP Linux Imaging and Printing System (ver. 3.21.2)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to
successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies
installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: debian-testing version is not supported. Using debian-10.7 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 5.10.0-6-amd64 #1 SMP Debian 5.10.28-1 (2021-04-09) GNU/Linux
Host: winowss
Proc: 5.10.0-6-amd64 #1 SMP Debian 5.10.28-1 (2021-04-09) GNU/Linux
Distribution: debian testing
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.21.2
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for debian distro testing version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.21.2
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip
html=/usr/share/doc/hplip-doc
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.21.2
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=yes
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
installed = 1
eula = 1
version = 3.21.2
Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan = /usr/bin/simple-scan %SANE_URI%
[fax]
email_address =
voice_phone =
[installation]
date_time = 05/02/21 12:16:03
version = 3.21.2
[last_used]
device_uri = hpaio:/usb/DeskJet_2600_series?serial=CN94T890F506MD
printer_name = HP_DeskJet_2600_series
working_dir = .
[polling]
device_list =
enable = false
interval = 5
[refresh]
enable = false
rate = 30
type = 1
[settings]
systray_messages = 0
systray_visible = 0
[upgrade]
last_upgraded_time = 1617143972
notify_upgrade = false
pending_upgrade_time = 0
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.53.3 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.31 OK -
dbus DBus - Message bus system REQUIRED - 1.12.20 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK -
network network -wget OPTIONAL - 1.21 OK -
avahi-utils avahi-utils OPTIONAL - 0.8 OK -
------------------------
| General Dependencies |
------------------------
libjpeg libjpeg - JPEG library REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - OK -
cups-image CUPS image - CUPS image development files REQUIRED - - OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
sane SANE - Scanning library REQUIRED - - OK -
sane-devel SANE - Scanning library development files REQUIRED - - OK -
libavahi-dev libavahi-dev REQUIRED - - OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.9 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.9.2 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.2.10 OK -
python3-devel Python devel - Python development files REQUIRED 2.2 3.9.2 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 8.1.2 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.59 OK -
--------------
| COMPILEDEP |
--------------
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 10.2.1 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.3 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.21.2 OK -
hpmudext IO-Extension REQUIRED - 3.21.2 OK -
----------------------
| Scan Configuration |
----------------------
'/etc/sane.d/dll.d/hpaio' not found.
hpaio HPLIP-SANE-Backend REQUIRED - 3.21.2 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.21.2 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `escl:http://127.0.0.1:60000' is a HP DeskJet 2600 series [651CD2] (USB) flatbed scanner
device `hpaio:/usb/DeskJet_2600_series?serial=CN94T890F506MD' is a Hewlett-Packard DeskJet_2600_series all-in-one
device `escl:http://127.0.0.1:60000' is a HP DeskJet 2600 series [651CD2] (USB) flatbed scanner
device `hpaio:/usb/DeskJet_2600_series?serial=CN94T890F506MD' is a Hewlett-Packard DeskJet_2600_series all-in-one
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
------------------------------------------------- -------------------------------------
hp:/usb/DeskJet_2600_series?serial=CN94T890F506MD HP DeskJet 2600 series
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP_DeskJet_2600_series
----------------------
Type: Printer
Device URI: hp:/usb/DeskJet_2600_series?serial=CN94T890F506MD
PPD: /etc/cups/ppd/HP_DeskJet_2600_series.ppd
PPD Description: HP Deskjet 2600 Series hpijs, 3.21.2
Printer status: printer HP_DeskJet_2600_series is idle. enabled since Sun 02 May 2021 11:58:54 AM CEST
error: Unable to communicate with device (code=12): hp:/usb/DeskJet_2600_series?serial=CN94T890F506MD
error: Device not found
error: Communication status: Failed
HP_DeskJet_2600_series_651CD2_USB_
----------------------------------
Type: Unknown
Device URI: implicitclass://HP_DeskJet_2600_series_651CD2_USB_/
PPD: /etc/cups/ppd/HP_DeskJet_2600_series_651CD2_USB_.ppd
PPD Description: HP DeskJet 2600 series, driverless, cups-filters 1.28.7
Printer status: printer HP_DeskJet_2600_series_651CD2_USB_ is idle. enabled since Sun 02 May 2021 12:08:38 PM CEST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
--------------
| PERMISSION |
--------------
USB HP_DeskJet_2600_series Required - - OK Node:'/dev/bus/usb/001/015' Perm:' root lp rw- rw- rw- rw- rw- r--'
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'cups' package is missing or 'cups' service is not running.
error: 'libcups2' package is missing/incompatible
error: 'python3-pyqt4' package is missing/incompatible
error: 'gtk2-engines-pixbuf' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'python3-dbus.mainloop.qt' package is missing/incompatible
Total Errors: 4
Total Warnings: 1
Done.