Scheduled Maintenance: We are aware of an issue with Google, AOL, and Yahoo services as email providers which are blocking new registrations. We are trying to fix the issue and we have several internal and external support tickets in process to resolve the issue. Please see: viewtopic.php?t=158230

 

 

 

Linux on XORO MegaPad gives a lot of errors

Off-Topic discussions about science, technology, and non Debian specific topics.
Post Reply
Message
Author
Hannescam
Posts: 12
Joined: 2021-06-01 10:41

Linux on XORO MegaPad gives a lot of errors

#1 Post by Hannescam »

Hello,

I have a XORO MegaPad 1564 V2 (link: https://www.xoro.de/produkte/details/xo ... d-1564-v2/) and I want on this to run Linux, most of the tutorials failed.
I have found a German website (link: https://www.foxplex.com/sites/linux-auf ... tallieren/) on that is a guide how to install Linux on RK3288 and similar chips.
The guide on the German website has the link to the image not available,
but I found an other image (Rabian a Debian based Linux) on the internet (website: https://wiki.radxa.com/Rock/prebuilt_images download:https://dl.radxa.com/rock2/images/rabian/emmc/).
I installed it without errors on the device. It booted, but it gives to much errors to control it on the serial Linux console, it doesn't connect to the internet.
(I use Linux every time, but i have also Windows 10)

The full log of the boot (it repeats after login shell repeats infinitely):

Hannescam
Posts: 12
Joined: 2021-06-01 10:41

Re: Linux on XORO MegaPad gives a lot of errors

#2 Post by Hannescam »

Code: Select all

DDR Version 1.00 20141007
In
Channel a: LPDDR3 200MHz
MR0=0x8
MR1=0x8
MR2=0x8
MR3=0x8
MR4=0x2
MR5=0x1
MR6=0x1
MR7=0x0
MR8=0x1B
MR9=0x1B
MR10=0x1B
MR11=0x1B
MR12=0x1B
MR13=0x1B
MR14=0x1B
MR15=0x1B
MR16=0x1B
Bus Width=32 Col=10 Bank=8 Row=14 CS=2 Die Bus-Width=32 Size=1024MB
Channel b: LPDDR3 200MHz
MR0=0x8
MR1=0x8
MR2=0x8
MR3=0x8
MR4=0x2
MR5=0x1
MR6=0x1
MR7=0x0
MR8=0x1B
MR9=0x1B
MR10=0x1B
MR11=0x1B
MR12=0x1B
MR13=0x1B
MR14=0x1B
MR15=0x1B
MR16=0x1B
Bus Width=32 Col=10 Bank=8 Row=14 CS=2 Die Bus-Width=32 Size=1024MB
Memory OK
Memory OK
OUT


U-Boot 2014.10-RK3288-01-ga179054 (Jul 20 2015 - 13:53:05)

CPU: rk3288
CPU's clock information:
    arm pll = 600000000HZ
    periph pll = 297000000HZ
    ddr pll = 200000000HZ
    codec pll = 384000000HZ
Board:	Rockchip platform Board
DRAM:  Found dram banks:1
Adding bank:0000000000000000(0000000080000000)
128 MiB
storage init OK!
Using default environment

GetParam
check parameter success
Unknow param: MACHINE_MODEL:rock2!
Unknow param: MACHINE_ID:007!
Unknow param: MANUFACTURER:RADXA!
power key: bank-0 pin-5
pmic:act8846
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2015-07-20#2.19
empty serial no.
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo_on switch from dts [0]
no fuel gauge found
failed to find part:misc
misc partition not found!
Hit any key to stop autoboot:  1  0 
kernel   @ 0x02000000 (0x005951a0)
ramdisk  @ 0x04bf0000 (0x004c0c00)
Secure Boot state: 0
bootrk: do_bootm_linux...
   Loading Device Tree to 0480f000, end 0482913a ... OK
Add bank:0000000000000000, 0000000080000000

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x500

Initializing cgroup subsys cpu

Initializing cgroup subsys cpuacct

Linux version 3.10.0 (root@radxa-x2) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #3 SMP PREEMPT Sat Jul 11 16:19:57 CST 2015

CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d

CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288

hdmi init vic is -1

rockchip_ion_reserve

cma: CMA: reserved 16 MiB at 1dc00000

Memory policy: ECC disabled, Data cache writealloc

On node 0 totalpages: 524288

free_area_init_node: node 0, pgdat c0acd840, node_mem_map c0bec000

  Normal zone: 984 pages used for memmap

  Normal zone: 0 pages reserved

  Normal zone: 125952 pages, LIFO batch:31

  HighMem zone: 3112 pages used for memmap

  HighMem zone: 398336 pages, LIFO batch:31

PERCPU: Embedded 9 pages/cpu @c1c1f000 s14016 r8192 d14656 u36864

pcpu-alloc: s14016 r8192 d14656 u36864 alloc=9*4096

pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523304

Kernel command line: vmalloc=516M console=ttyFIQ0 console=tty0 init=/sbin/init root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait  mtdparts=rk29xxnand:0x00010000@0x00016000(boot),-@0x00994000(linuxroot) storagemedia=emmc loader.timestamp=2015-07-20_13:53:05 hdmi.vic=-1

PID hash table entries: 2048 (order: 1, 8192 bytes)

Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

Memory: 2048MB = 2048MB total

Memory: 2046420k/2046420k available, 50732k reserved, 1593344K highmem

Virtual kernel memory layout:

    vector  : 0xffff0000 - 0xffff1000   (   4 kB)

    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

    vmalloc : 0xdf000000 - 0xff000000   ( 512 MB)

    lowmem  : 0xc0000000 - 0xdec00000   ( 492 MB)

    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

    modules : 0xbf000000 - 0xbfe00000   (  14 MB)

      .text : 0xc0008000 - 0xc09e8a6c   (10115 kB)

      .init : 0xc09e9000 - 0xc0a4d6c0   ( 402 kB)

      .data : 0xc0a4e000 - 0xc0ad4fa8   ( 540 kB)

       .bss : 0xc0ad4fa8 - 0xc0beb744   (1114 kB)

SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

Preemptible hierarchical RCU implementation.

	RCU dyntick-idle grace-period acceleration is enabled.

NR_IRQS:16 nr_irqs:16 16

rk_clk_tree_init start! cru base = 0xfed00000

rk_get_uboot_display_flag: uboot_logo_on = 0

rkclk_init_clks: cnt_parent = 7

rkclk_init_clks: cnt_rate = 32

Architected local timer running at 24.00MHz (phys).

Switching to timer-based delay loop

sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns

process version: 0

channel:0, lkg:0

target-temp:95

channel:2, lkg:0

target-temp:95

channel:0, lkg:0

target-temp:95

channel:1, lkg:0

target-temp:95

sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms

Console: colour dummy device 80x30

console [tty0] enabled

Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)

pid_max: default: 32768 minimum: 301

Security Framework initialized

SELinux:  Initializing.

SELinux:  Starting in permissive mode

Mount-cache hash table entries: 512

Initializing cgroup subsys debug

Initializing cgroup subsys freezer

CPU: Testing write buffer coherency: ok

/cpus/cpu@0 missing clock-frequency property

/cpus/cpu@1 missing clock-frequency property

/cpus/cpu@2 missing clock-frequency property

/cpus/cpu@3 missing clock-frequency property

CPU0: thread -1, cpu 0, socket 5, mpidr 80000500

Setting up static identity map for 0xc0719c18 - 0xc0719c70

last_log: 0x1d500000 map to 0xdf004000 and copy to 0xdf086000, size 0x80000 early 0x1398 (version 3.0)

CPU1: Booted secondary processor

CPU1: thread -1, cpu 1, socket 5, mpidr 80000501

CPU2: Booted secondary processor

CPU2: thread -1, cpu 2, socket 5, mpidr 80000502

CPU3: Booted secondary processor

CPU3: thread -1, cpu 3, socket 5, mpidr 80000503

Brought up 4 CPUs

SMP: Total of 4 processors activated (192.00 BogoMIPS).

CPU: All CPU(s) started in SVC mode.

devtmpfs: initialized

pinctrl core: initialized pinctrl subsystem

regulator-dummy: no parameters

NET: Registered protocol family 16

DMA: preallocated 256 KiB pool for atomic coherent allocations

ion_snapshot: 0x1d5b0000 map to 0xdf107000 and copy to 0xc0bc6d94 (version 0.1)

Registered FIQ tty driver

<hit enter to activate fiq debugger>
[    0.000000] Booting Linux on physical CPU 0x500
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.0 (root@radxa-x2) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #3 SMP PREEMPT Sat Jul 11 16:19:57 CST 2015
[    0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
[    0.000000] hdmi init vic is -1
[    0.000000] rockchip_ion_reserve
[    0.000000] cma: CMA: reserved 16 MiB at 1dc00000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] PERCPU: Embedded 9 pages/cpu @c1c1f000 s14016 r8192 d14656 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523304
[    0.000000] Kernel command line: vmalloc=516M console=ttyFIQ0 console=tty0 init=/sbin/init root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait  mtdparts=rk29xxnand:0x00010000@0x00016000(boot),-@0x00994000(linuxroot) storagemedia=emmc loader.timestamp=2015-07-20_13:53:05 hdmi.vic=-1
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 2048MB = 2048MB total
[    0.000000] Memory: 2046420k/2046420k available, 50732k reserved, 1593344K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf000000 - 0xff000000   ( 512 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdec00000   ( 492 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc09e8a6c   (10115 kB)
[    0.000000]       .init : 0xc09e9000 - 0xc0a4d6c0   ( 402 kB)
[    0.000000]       .data : 0xc0a4e000 - 0xc0ad4fa8   ( 540 kB)
[    0.000000]        .bss : 0xc0ad4fa8 - 0xc0beb744   (1114 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] rk_clk_tree_init start! cru base = 0xfed00000
[    0.000000] rk_get_uboot_display_flag: uboot_logo_on = 0
[    0.000000] rkclk_init_clks: cnt_parent = 7
[    0.000000] rkclk_init_clks: cnt_rate = 32
[    0.000000] Architected local timer running at 24.00MHz (phys).
[    0.000000] Switching to timer-based delay loop
[    0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
[    0.000000] process version: 0
[    0.000000] channel:0, lkg:0
[    0.000000] target-temp:95
[    0.000000] channel:2, lkg:0
[    0.000000] target-temp:95
[    0.000000] channel:0, lkg:0
[    0.000000] target-temp:95
[    0.000000] channel:1, lkg:0
[    0.000000] target-temp:95
[    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.805345] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.811788] pid_max: default: 32768 minimum: 301
[    0.815155] Security Framework initialized
[    0.817569] SELinux:  Initializing.
[    0.825000] Mount-cache hash table entries: 512
[    0.830260] Initializing cgroup subsys debug
[    0.833763] Initializing cgroup subsys freezer
[    0.837361] CPU: Testing write buffer coherency: ok
[    0.842855] /cpus/cpu@0 missing clock-frequency property
[    0.847302] /cpus/cpu@1 missing clock-frequency property
[    0.851689] /cpus/cpu@2 missing clock-frequency property
[    0.856069] /cpus/cpu@3 missing clock-frequency property
[    0.860930] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
[    0.866708] Setting up static identity map for 0xc0719c18 - 0xc0719c70
[    0.880251] last_log: 0x1d500000 map to 0xdf004000 and copy to 0xdf086000, size 0x80000 early 0x1398 (version 3.0)
[    0.963534] CPU1: Booted secondary processor
[    0.968317] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
[    0.983272] CPU2: Booted secondary processor
[    0.988046] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
[    1.003051] CPU3: Booted secondary processor
[    1.007823] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
[    1.009980] Brought up 4 CPUs
[    1.015671] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    1.019306] CPU: All CPU(s) started in SVC mode.
[    1.023757] devtmpfs: initialized
[    1.045297] pinctrl core: initialized pinctrl subsystem
[    1.049086] regulator-dummy: no parameters
[    1.054189] NET: Registered protocol family 16
[    1.065216] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    1.073876] ion_snapshot: 0x1d5b0000 map to 0xdf107000 and copy to 0xc0bc6d94 (version 0.1)
[    1.076957] Registered FIQ tty driver
onsole [ttyFIQ0] enabled

[    1.537184] console [ttyFIQ0] enabled
Registered fiq debugger ttyFIQ0

[    1.543955] Registered fiq debugger ttyFIQ0
rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff

[    1.554340] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
ockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f

[    1.567938] rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
ockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f

[    1.582059] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
ockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b

[    1.596171] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
ockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff

[    1.612350] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
ockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff

[    1.630509] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
ockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff

[    1.648670] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
ockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff

[    1.666826] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
ockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff

[    1.684987] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
ockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff

[    1.703148] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
ockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff

[    1.721307] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
ockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff

[    1.739467] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
ockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff

[    1.757722] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
ockchip_pinctrl_probe:name=RK3288-GPIO,type=3

[    1.771653] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f

[    1.783317] rockchip_pinctrl_probe:name=base start=0xff7700r00,end=0xff77013f
ockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf

[    1.796522] rockchip_pinctrl_probe:name=pull start=0rxff770140,end=0xff7701bf
ockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f

[    1.809630] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
piochip_add: registered GPIOs 0 to 31 on device: gpio0

gpiochip_add: registered GPIOs 32 to 63 on device: gpio1

gpiochip_add: registered GPIOs 64 to 95 on device: gpio2

gpiochip_add: registered GPIOs 96 to 127 on device: gpio3

gpiochip_add: registered GPIOs 128 to 159 on device: gpio4

gpiochip_add: registered GPIOs 160 to 191 on device: gpio5

gpiochip_add: registered GPIOs 192 to 223 on device: gpio6

gpiochip_add: registered GPIOs 224 to 255 on device: gpio7

gpiochip_add: registered GPIOs 256 to 287 on device: gpio8

gpiochip_add: registered GPIOs 288 to 319 on device: gpio15

rockchip_interrupts_register:bank_num=7

[    1.877707] rockchip_interrupts_register:bank_num=7
of_get_named_gpio_flags exited with status 13

of_get_gpio_init_config:gpio[0] = 13, value = 1

[    1.893550] of_get_gpio_init_config:gpio[0] = 13, value = 1
rockchip_pinctrl_probe:init ok

[    1.902120] rockchip_pinctrl_probe:init ok
rk_iommu ff900800.iep_mmu: (iep) Enter

[    1.926600] rrk_iommu ff900800.iep_mmu: (iep) Enter
k_iommu ff900800.iep_mmu: data->num_res_mem=1

rk_iommu ff900800.iep_mmu: data->num_res_irq=1

rk_iommu ff900800.iep_mmu: res->start = 0xff900800  ioremap to  data->res_bases[0] = 0xdf114800

IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.

[    1.954763]r IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
k_iommu ff900800.iep_mmu: (iep) Initialized

[    1.964899] rk_iommu ff900800.iep_mmu: (iep) Initialized
rk_iommu ff950800.vip_mmu: (vip) Enter

[    1.973947] rrk_iommu ff950800.vip_mmu: (vip) Enter
k_iommu ff950800.vip_mmu: data->num_res_mem=1

rk_iommu ff950800.vip_mmu: data->num_res_irq=1

rk_iommu ff950800.vip_mmu: res->start = 0xff950800  ioremap to  data->res_bases[0] = 0xdf116800

IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.

[    2.002085r] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
k_iommu ff950800.vip_mmu: (vip) Initialized

[    2.012221] rk_iommu ff950800.vip_mmu: (vip) Initialized
rk_iommu ff930300.vopb_mmu: (vopb) Enter

[    2.021456] rkr_iommu ff930300.vopb_mmu: (vopb) Enter
k_iommu ff930300.vopb_mmu: data->num_res_mem=1

rk_iommu ff930300.vopb_mmu: data->num_res_irq=1

rk_iommu ff930300.vopb_mmu: res->start = 0xff930300  ioremap to  data->res_bases[0] = 0xdf11e300

IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.

[    2.050059r] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
k_iommu ff930300.vopb_mmu: (vopb) Initialized

[    2.060381] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
rk_iommu ff940300.vopl_mmu: (vopl) Enter

[    2.069789]r rk_iommu ff940300.vopl_mmu: (vopl) Enter
k_iommu ff940300.vopl_mmu: data->num_res_mem=1

rk_iommu ff940300.vopl_mmu: data->num_res_irq=1

rk_iommu ff940300.vopl_mmu: res->start = 0xff940300  ioremap to  data->res_bases[0] = 0xdf12a300

IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.

[    2.098379r] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
k_iommu ff940300.vopl_mmu: (vopl) Initialized

[    2.108700] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
rk_iommu ff9c0440.hevc_mmu: (hevc) Enter

[    2.118107] rrk_iommu ff9c0440.hevc_mmu: (hevc) Enter
k_iommu ff9c0440.hevc_mmu: data->num_res_mem=2

rk_iommu ff9c0440.hevc_mmu: data->num_res_irq=1

rk_iommu ff9c0440.hevc_mmu: res->start = 0xff9c0440  ioremap to  data->res_bases[0] = 0xdf12c440

rk_iommu ff9c0440.hevc_mmu: res->start = 0xff9c0480  ioremap to  data->res_bases[1] = 0xdf12e480

IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.

[    2.155969] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000r.
k_iommu ff9c0440.hevc_mmu: (hevc) Initialized

[    2.166292] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
rk_iommu ff9a0800.vpu_mmu: (vpu) Enter

[    2.175514] rrk_iommu ff9a0800.vpu_mmu: (vpu) Enter
k_iommu ff9a0800.vpu_mmu: data->num_res_mem=1

rk_iommu ff9a0800.vpu_mmu: data->num_res_irq=1

rk_iommu ff9a0800.vpu_mmu: res->start = 0xff9a0800  ioremap to  data->res_bases[0] = 0xdf136800

IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.

[    2.2036r41] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
k_iommu ff9a0800.vpu_mmu: (vpu) Initialized

[    2.213775] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
rk_iommu ff914000.isp_mmu: (isp_mmu) Enter

[    2.223198]r rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
k_iommu ff914000.isp_mmu: data->num_res_mem=2

rk_iommu ff914000.isp_mmu: data->num_res_irq=1

rk_iommu ff914000.isp_mmu: res->start = 0xff914000  ioremap to  data->res_bases[0] = 0xdf138000

rk_iommu ff914000.isp_mmu: res->start = 0xff915000  ioremap to  data->res_bases[1] = 0xdf13a000

IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.

[    2.260847] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
k_iommu ff914000.isp_mmu: (isp_mmu) Initialized

[    2.271272] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.

[    2.284140] hw-breakpoint: found 5 (+1 reserved) breakpoihnt and 4 watchpoint registers.
w-breakpoint: maximum watchpoint size is 4 bytes.

[    2.296994] hw-breakpoint: maximum watchpoint size is 4 bytes.
DDR DEBUG: version 1.00 20140603 

[    2.306091] DDR DEBUG: version 1.00 20140603D 
DR DEBUG: Channel a: 

[    2.312717] DDR DEBUG: Channel a: 
DDR DEBUG: LPDDR3 Device

[    2.318570] DDRD DEBUG: LPDDR3 Device
DR DEBUG: Bus Width=32 Col=10 Bank=8 Row=14 CS=2 Total Capability=1024MB

[    2.329186] DDR DEBUG: Bus Width=32 CoDl=10 Bank=8 Row=14 CS=2 Total Capability=1024MB
DR DEBUG: Channel b: 

[    2.339224] DDR DEBUG: ChanneDl b: 
DR DEBUG: LPDDR3 Device

[    2.345069D] DDR DEBUG: LPDDR3 Device
DR DEBUG: Bus Width=32 Col=10 Bank=8 Row=14 CS=2 Total Capability=1024MB

[    2.355683] DDR DEBUG: Bus WidthD=32 Col=10 Bank=8 Row=14 CS=2 Total Capability=1024MB
DR DEBUG: addr=0xada000

[    2.365907] DDR DEBUG: addr=0xada000
DDR DEBUG: stride=9, size=256, halfcap=40000000

[D    2.374080] DDR DEBUG: stride=9, size=256, halfcap=40000000
DR DEBUG: socAddr[0]=0xada000, socAddr[1]=0xada100

[    2.384601] DDR DEBUG: socAddr[0]=D0xada000, socAddr[1]=0xada100
DR DEBUG: chAddr[0]=0xada000, chAddr[1]=0xada000

[    2.395275] DDR DEBUG: chAddr[0]=0xada0D00, chAddr[1]=0xada000
DR DEBUG: dtar[0]=0x2015b000, dtar[1]=0x2015b000

[    2.405779] DDR DEBUG: dtar[0]=0x2015b000, dtar[1]=0x2015b000
DR DEBUG: init success!!! freq=200MHz

D[    2.415167] DDR DEBUG: init success!!! freq=200MHz
DR DEBUG: Channel a: 

[    2.422193] DDR DEBUG: Channel a: 
DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270

[    2.434321] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERDR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
DR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270

[    2.452377] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTDIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
DR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270

[    2.470434] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIEDRR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
DR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270

[    2.488490] DDR DEBUG: DTONE=0x3, DTERR=0x0,D DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
DR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0

[    2.503824] DDR DEBUG: ZERR=0, ZDODNE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
DR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19

[    2.515164] DDR DEBUG: DRV Pull-UDp=0x19, DRV Pull-Dwn=0x19
DR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2

D[    2.524943] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
DR DEBUG: Channel b: 

[    2.532481] DDR DEBUG: Channel b: 
DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270

[    2.544608] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIDERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
DR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270

[    2.562663] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIDERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
DR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270

[    2.580719] DDR DEBUG: DTONE=0x3, DTERR=0x0, DDTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
DR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270

[    2.598775] DDR DEBUG: DTONE=0x3, DTERR=0x0, DDTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
DR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0

[    2.614110] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0xD0, OPD=0x0, OPU=0x0
DR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19

[    2.625449] DDR DEBUG: DRV Pull-UDp=0x19, DRV Pull-Dwn=0x19
DR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2

[    2.635230] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
bio: create slab <bio-0> at 0

[    2.701776] bio: create slab <bio-0> at 0
SCSI subsystem initialized

[    2.708433] SCSI subsystem initialized
usbcore: registered new interface driver usbfs

[    2.716710] usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub

[    2.726506] usbcore: registered new interface driver hub
usbcore: registered new device driver usb

[    2.735840] usbcore: registered new device driver usb
of_get_named_gpio_flags exited with status 14

of_get_named_gpio_flags exited with status 12

of_get_named_gpio_flags exited with status 15

of_get_named_gpio_flags exited with status 16

rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter

[    2.766081] rockchipi_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
2c i2c-0: of_i2c: modalias failure on /i2c@ff650000/rk808@1b

[    2.778166] i2c i2c-0: of_i2c: modalias failure on /i2c@ff650000/rk808@1b
of_get_named_gpio_flags exited with status 260

of_get_named_gpio_flags exited with status 261

rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter

[    2.799796] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
of_get_named_gpio_flags exited with status 201

of_get_named_gpio_flags exited with status 202

rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter

[    2.820813] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
of_get_named_gpio_flags exited with status 81

of_get_named_gpio_flags exited with status 80

rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter

[    2.841649] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
f_get_named_gpio_flags exited with status 241

of_get_named_gpio_flags exited with status 242

rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter

[    2.862580] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
usb_battery_charger_detect_synop , battery_charger_detect 1, pass DCD, dcd_state = 1

[    2.876817] usb_battery_charger_detect_synop , battery_charger_detect 1, pass DCD, dcd_state = 1
edia: Linux media interface: v0.10

[    2.888952] media: Linux media interface: v0.10
Linux video capture interface: v2.00

[    2.897051] Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered

[    2.905608] pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[    2.919007] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
TP clock support registered

[    2.930816] PTP clock support registered
rockchip_temp_probe,line=362

[    2.937555] rockchip_temp_probe,line=362
tsadc ff280000.tsadc: initialized

[    2.944775] tsadc ff280000.tsadc: initialized
rockchip_ion_parse_dt: num_heaps = 1

[    2.952713] roc0kchip_ion_parse_dt: num_heaps = 1
:  0  3  vmalloc  0x  (null)

[    2.960246] 0:  0  3  vmalloc  0x  (null)
Rockchip ion module is successfully loaded (v1.0)

[    2.969042] Rockchip ion module is successfully loaded (v1.0)
Advanced Linux Sound Architecture Driver Initialized.

[    2.979940] Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.16

[    2.988461] Bluetooth: Core ver 2.16
NET: Registered protocol family 31

[    2.995439] NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized

[    3.005322] Bluetooth: HCI device and connection manager initBalized
luetooth: HCI socket layer initialized

[    3.015411] Bluetooth: HCI socket layer initializedB
luetooth: L2CAP socket layer initialized

[    3.024315] Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized

[    3.033201] Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain

[    3.043512] cfg80211: Calling CRDA to update world regulatory domain
act8846_i2c_probe,line=879

[    3.052477] act8846_i2c_probe,line=879
act8846_parse_dt,line=744

[    3.058780] act8846_parse_dt,line=744
of_get_named_gpio_flags exited with status 258

of_get_named_gpio_flags exited with status 10

act8846_i2c_probe: act8846_pmic_hold=1

[    3.075290] act8846_i2c_probe: act8846_pamic_hold=1
ct8846_i2c_probe: act8846_pmic_sleep=1

[    3.083923] act8846_i2c_probe: act8846_pmic_sleep=1
act_dcdc1: 1500 mV 

[    3.090760] act_dcdc1: 1500 mV 
vccio: 3300 mV 

[    3.096202] vccio: 3300 mV 
vdd_logic: 700 <--> 1500 mV at 1100 mV 

[    3.102867] vdd_logic: 700 <--> 1500 mV at 1100 mV 
act_dcdc4: 2000 mV 

[    3.109714] act_dcdc4: 2000 mV 
vccio_sd: 3300 mV 

[    3.114753] vccio_sd: 3300 mV 
act_ldo2: 1000 mV 

[    3.119706] act_ldo2: 1000 mV 
act_ldo3: 3300 mV 

[    3.124657] act_ldo3: 3300 mV 
act_ldo4: 3300 mV 

[    3.129609] act_ldo4: 3300 mV 
act_ldo5: 3300 mV 

[    3.134559] act_ldo5: 3300 mV 
act_ldo6: 1000 mV 

[    3.139511] act_ldo6: 1000 mV 
vcc_18: 1800 mV 

[    3.144275] vcc_18: 1800 mV 
act_ldo8: 1800 mV 

[    3.149131] act_ldo8: 1800 mV 
vdd_arm: 712 <--> 1500 mV at 1000 mV 

[    3.159365] vdd_arm: 712 <--> 1500 mV at 1000 mV 
vdd_gpu: 712 <--> 1500 mV at 1000 mV 

[    3.169603] vdd_gpu: 712 <--> 1500 mV at 1000 mV 
Switching to clocksource arch_sys_counter

[    3.178861] Switching to clocksource arch_sys_counter
rk-fb rockchip-fb: rk fb ion client create success!

[    3.249636] rk-fb rockchip-fb: rk fb ion clrient create success!
k-fb rockchip-fb: rockchip framebuffer driver probe

[    3.260683] rk-fb rockchip-fb: rockchip framebuffer driver probe
rk-screen rk_screen.9: rockchip screen probe success

[    3.271756] rk-screen rk_screen.9: rockchip screen probe success
rk32-lvds rk32-lvds: rk32 lvds driver probe success

[    3.282745] rk32-lvds rk32-lvds: rk32 lvds driver probe success
rk32-edp ff970000.edp: screen is not edp!

[    3.292708] rk32-edp ff970000.edp: screen is not edp!
rk32-edp: probe of ff970000.edp failed with error -22

[    3.302932] rk32-edp: probe of ff970000.edp failed with error -22
rk3288-lcdc lcdc0: can't find power_ctr node for lcdc0

[    3.314271] rk3288-lcdc lcdc0: can't find power_ctr node for lcdc0
graphics fb0: rockchip framebuffer registerd:fb0

[    3.325143] graphics fb0: rockchip framebuffer registerd:fb0
graphics fb1: rockchip framebuffer registerd:fb1

[    3.335496] graphics fb1: rockchip framebuffer registerd:fb1
graphics fb2: rockchip framebuffer registerd:fb2

[    3.345847] graphics fb2: rockchip framebuffer registerd:fb2
graphics fb3: rockchip framebuffer registerd:fb3

[    3.356198] graphics fb3: rockchip framebuffer registerd:fb3
graphics fb4: rockchip framebuffer registerd:fb4

[    3.366551] graphics fb4: rockchip framebuffer registerd:fb4
rk_iommu ff930300.vopb_mmu: (vopb) Enabled

[    3.376341] rk_iommu ff930300.vopb_mmu: (vopb) Enabled
rk_iommu ff930300.vopb_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x1d670000

rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60 [    3.396065] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60 
k3288-lcdc lcdc0: wakeup from standby!

[    3.405573] rk3288-lcdc lcdc0: wakeup from standby!
alloc_buffer:ion_phy_addr=0x10000000

[    3.514327] alloc_buffer:ion_phy_addr=0x10000000
fb0:phy:10000000>>vir:df191000>>len:0x1800000

[    3.562174] fb0:phy:10000000>>vir:df191000>>len:0x1800000
rk3288-lcdc lcdc0: lcdc0 probe ok, iommu enabled

[    3.572263] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu enabled
rockchip_set_mux:warning ignore bank num 15

[    3.582145] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15

[    3.591603] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15

[    3.601055] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15

[    3.610510] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15

[    3.619967] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15

[    3.629421] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15

[    3.638877] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15

[    3.648330] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15

[    3.657790] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15

[    3.667245] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15

[    3.676705] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15

[    3.686157] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15

[    3.695607] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15

[    3.705065] rockchip_set_mux:warning ignore bank num 15
NET: Registered protocol family 2

[    3.732367] NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 3, 32768 bytes)

[    3.742946] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
CP bind hash table entries: 4096 (order: 3, 32768 bytes)

[    3.755437] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
CP: Hash tables configured (established 4096 bind 4096)

[    3.767232] TCP: Hash tables configured (established 4096 bind 4096)
CP: reno registered

[    3.775541] TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)

[    3.783676] UDP hash table entries: 256 (order: 1, 8192 bytes)
DP-Lite hash table entries: 256 (order: 1, 8192 bytes)

[    3.794766] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
ET: Registered protocol family 1

[    3.804221] NET: Registered protocol family 1
Unpacking initramfs...

[    3.810846] Unpacking initramfs...
Freeing initrd memory: 4864K (c4bf0000 - c50b0000)

[    3.938383] Freeing initrd memory: 4864K (c4bf0000 - c50b0000)
hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available

[    3.951697] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
robe device ff9a0000.vpu_service

[    3.963062] probe device ff9a0000.vpu_service
vpu_service: power on

[    3.969613] vpu_service: power on
checking hw id 4831

[    3.974938] checking hw id 4831
vpu_service set to auto frequency mode

[    3.981856] vpu_service set to auto frequency mode
vcodec vpu_service: vcodec ion client create success!

[    3.991820] vcodec vpu_service: vcodec ion client create success!
vpu_service: power off...[    4.000249] vpu_service: power off...done


init success

[    4.004328] done
[    4.005876] init success
probe device ff9c0000.hevc_service

[    4.013602] probe device ff9c0000.hevc_service
hevc_service: power on

[    4.020303] hevc_service: power on
checking hw id 6867

[    4.025705] checking hw id 6867
vcodec hevc_service: vcodec ion client create success!

[    4.034128] vcodec hevc_service: vcodec ion client create success!
hevc_service: power off...[    4.042743] hevc_service: power off...done


init success

[    4.046893] done
[    4.048448] init success
rknandbase v1.0 2014-03-31

[    4.055422] rknandbase v1.0 2014-03-31
rknand_probe clk rate = 148500000

[    4.062477] rknand_probe clk rate = 148500000
rknand_probe clk rate = 148500000

[    4.070134] rknand_probe clk rate = 148500000
rknand ff400000.nandc0: can't request region for resource [mem 0xff400000-0xff403fff]

[    4.082675] rknand ff400000.nandc0: can't request region for resource [mem 0xff400000-0xff403fff]
knand ff400000.nandc0: no reg resource?

[    4.095374] rknand ff400000.nandc0: no reg resource?
r
knand: probe of ff400000.nandc0 failed with error -1

[    4.105506] rknand: probe of ff400000.nandc0 failed with error -1
knand_driver:ret = 0 

[    4.113756] rknand_driver:ret = 0 
audit: initializing netlink socket (disabled)

[    4.121592] audit: initializing netlink socket (disabled)
type=2000 audit(2.460:1): initialized

[    4.130653] type=2000 audit(2.460:1): initialized
bounce pool size: 64 pages

[    4.137997] bounce pool size: 64 pages
fuse init (API version 7.22)

[    4.156393] fuse init (API version 7.22)
msgmni has been set to 926

[    4.162974] msgmni has been set to 926
SELinux:  Registering netfilter hooks

Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)

[    4.183211] Block layer SCSI generic (bsg) driver veirsion 0.4 loaded (major 246)
o scheduler noop registered

[    4.193421] io scheduler noiop registered
o scheduler deadline registered

[    4.200550] io scheduler deadline registered
io scheduler cfq registered (default)

[    4.208480] io scheduler cfq registered (default)
Console: switching to colour frame buffer device 240x67

[    4.218612] Console: switching to colour frame buffer device 240x67
rga ff920000.rga: rga ion client create success!

[    4.320422] rga ff920000.rga: rga ion client create success!
rga: Driver loaded succesfully

[    4.329469] rga: Driver loaded succesfully
IEP Power ON

[    4.335168] IEP Power ON
iep ion client create success!

[    4.340916] iep ion client create success!
rk_iommu ff900800.iep_mmu: (iep) Enabled

[    4.349246] rkr_iommu ff900800.iep_mmu: (iep) Enabled
k_iommu ff900800.iep_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x1d66b000

IEP Power OFF

[    4r.365509] IEP Power OFF
k_iommu ff900800.iep_mmu: (iep) Disabled

[r    4.372367] rk_iommu ff900800.iep_mmu: (iep) Disabled
k_iommu ff900800.iep_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x1d66b000

[    4.386846] rk_iommu ff900800.iep_mmu: rockchip_Iiommu_detach_device: Detached IOMMU with pgtable 0x1d66b000
EP Driver loaded succesfully

[    4.400061] IEP Driver loaded succesfully
Module initialized.

[    4.406321] Module initialized.
dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208

[    4.415606] ddma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
ma-pl330 ffb20000.pdma: 	DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10

[    4.430337] dma-pl330 ffb20000.pdma: 	DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208

[    4.445017] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
ma-pl330 ff250000.pdma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16

[    4.459857] dma-pl330 ff250000.pdma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
wm-voltage-regulator pwm_regulator.24: unable to request PWM, trying legacy API

[    4.476419] pwm-voltage-regulator pwm_regulator.24p: unable to request PWM, trying legacy API
wm-voltage-regulator pwm_regulator.24: unable to request legacy PWM

[    4.491950] pwm-vpoltage-regulator pwm_regulator.24: unable to request legacy PWM
wm_regulator_probe:error

[    4.502338] pwm_regulator_probe:error
platform pwm_regulator.24: Driver pwm-voltage-regulator requests probe deferral

[    4.513859] platform pwm_regulator.24: Driver pwm-voltage-regulator requests probe deferral
k_serial.c v1.8 2014-03-04

[    4.525348] rk_serial.c v1.8 2014-03-04
ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0

[    4.536314] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
erial ff180000.serial: membase 0xdf172000

[    4.548496] serial ff180000.serial: membase 0xdf172000
loop: module loaded

[    4.560464] loop: module loaded
SCSI Media Changer driver v0.25 

[    4.567048] SCSI Media Changer driver v0.25 
tun: Universal TUN/TAP device driver, 1.6

t[    4.575669] tun: Universal TUN/TAP device driver, 1.6
un: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

[    4.586308] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
stmmac_probe_config_dt: Can not read property: pmu_regulator.

[    4.598789] stmmac_probe_config_dt: Can not read property: pmu_regulator.
tmmac_probe_config_dt: Can not read property: pmu_enable_level.

stmmac_probe_config_dt: clock input or output? (input).

stmmac[    4.612127] stmmac_probe_config_dt: Can not read property: pmu_enable_level.
_probe_config_dt: TX delay(0x30).

stmma[    4.617545] stmmac_probe_config_dt: clock input or output? (input).
c_probe_config_dt: RX delay(0x10).

of_g[    4.628358] stmmac_probe_config_dt: TX delay(0x30).
et_named_gpio_flags exited with status 136

of_g[    4.638403] stmmac_probe_config_dt: RX delay(0x10).
et_named_gpio_flags: can't parse gpios property

stmmac_probe_config_dt: is rockchip,rk3288-gmacstmmc_pltfr_init: 

[    4.663933] stmmac_probe_config_dt: is rockchip,rk3288-gmac
stmmc_pltfr_init: ERROR: Get power-gpio failed.

[    4.663946] stmmc_pltfr_init: 
[    4.674473] sstmmc_pltfr_init: ERROR: Get power-gpio failed.
tmmc_pltfr_init: init for RGMII

[    4.686576] stmmc_pltfr_intit: init for RGMII
x delay=0x30

rx delay=0x10

[    4.693951] tx delay=0x30
[    4.693951] rx delay=0x10
stmmac - user ID: 0x10, Synopsys ID: 0x35

[    4.703576] stmmac - user ID : 0x10, Synopsys ID: 0x35
Normal descriptors

[    4.729050]  Norma l descriptors
Ring mode enabled

[    4.752308]  Ring mode  enabled
DMA HW capability register supported[    4.777024]  DMA HW cap ability register supportedRX Checksum Offload Engine supported (type 2)


[    4.786374]  RX Checksum Offload Engine supported (type 2)
 TX Checksum insertion supported

 Wake-Up On Lan supported

 Enable RX Mitigation via HW Watchdog Timer

PPP generic driver version 2.4.2

PPP BSD Compression module registered

PPP Deflate Compression module [    4.831891]  TX Checksum insertion supported
registered

PPP MPPE Compression module registered

NET: Registered protocol family 24

SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).

CSLIP: code copyright 198[    4.834457]  Wake-Up On Lan supported
9 Regents of the University of California.

Rockchip WiFi SYS interface (V1.00) ... 

usbcore: registered new interface driver catc

usbcore: registered new interface driver kaweth

pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethe[    4.838833]  Enable RX Mitigation via HW Watchdog Timer
rnet driver

usbcore: registered new interface driver pegasus

usbcore: registered new interface driver rtl8150

usbcore: registered new interface driver r8152

hso: drivers/net/usb/hso.c: Option Wireless

[    4.843383] PPP generic driver version 2.4.2
usbcore: registered new interface driver hso

usbcore: registered new interface driver asix

usbcore: registered new interface driver ax88179_178a

usbcore: registered new interface driver cdc[    4.847704] PPP BSD Compression module registered
_ether

usbcore: registered new interface driver cdc_eem

usbcore: registered new interface driver dm9601

usbcore: registered new interface driver dm9620

usbcore: registered new interface driver smsc75[    4.855942] PPP Deflate Compression module registered
xx

usbcore: registered new interface driver smsc95xx

usbcore: registered new interface driver gl620a

usbcore: registered new interface driver net1080

usbcore: registered new interface driver plus[    4.859780] PPP MPPE Compression module registered
b

usbcore: registered new interface driver rndis_host

usbcore: registered new interface driver cdc_subset

usbcore: registered new interface driver zaurus

usbcore: registered new interface driver [    4.863184] NET: Registered protocol family 24
MOSCHIP usb-ethernet driver

usbcore: registered new interface driver int51x1

usbcore: registered new interface driver kalmia

usbcore: registered new interface driver ipheth

usbcore: registered new interface driver sierra_net

us[    4.872298] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
bcore: registered new interface driver cx82310_eth

usbcore: registered new interface driver cdc_ncm

usbcore: registered new interface driver qmi_wwan

usbcore: registered new interface driver cdc_mbim

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Dr[    4.882404] CSLIP: code copyright 1989 Regents of the University of California.
iver

ehci_rk_probe e0a00000 e0a00010

rockchip_ehci_host ff500000.usb: Rockchip On-Chip EHCI Host Controller

rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bu[    4.886393] Rockchip WiFi SYS interface (V1.00) ... 
s number 1

[    4.891041] usbcore: registered new interface driver catc
[    4.895755] usbcore: registered new interface driver kaweth
[    4.907496] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    4.912341] usbcore: registered new interface driver pegasus
rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000

rockchip_ehci_host ff500000.usb: USB 0.0 started, EHCI 1.00

usb usb1: New[    4.917182] usbcore: registered new interface driver rtl8150
 USB device found, idVendor=1d6b, idProduct=0002

usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

usb usb1: Product: Rockchip On-Chip EHCI Host Controller

usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd

usb usb1: SerialNumber: ff500[    4.921801] usbcore: registered new interface driver r8152
000.usb

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 1 port detected

[    4.930251] hso: drivers/net/usb/hso.c: Option Wireless
ehci_rk_probe ok

usbcore: registered new interface driver cdc_acm

cdc_acm: USB Abstract Control Model driver for USB modems a[    4.934835] usbcore: registered new interface driver hso
nd ISDN adapters

usbcore: registered new interface driver usblp

usbcore: registered new interface driver cdc_wdm

usbcore: registered new interface driver usb-storage

usbcore: registered new interface driver um[    4.939418] usbcore: registered new interface driver asix
s-alauda

usbcore: registered new interface driver ums-cypress

usbcore: registered new interface driver ums-datafab

usbcore: registered new interface driver ums_eneub6250

usbcore: registered new interf[    4.944690] usbcore: registered new interface driver ax88179_178a
ace driver ums-freecom

usbcore: registered new interface driver ums-isd200

usbcore: registered new interface driver ums-jumpshot

usbcore: registered new interface driver ums-karma

usbcore: registered new interfa[    4.954316] usbcore: registered new interface driver cdc_ether
ce driver ums-onetouch

usbcore: registered new interface driver ums-sddr09

usbcore: registered new interface driver ums-sddr55

usbcore: registered new interface driver ums-usbat

usbcore: registered new interfa[    4.959159] usbcore: registered new interface driver cdc_eem
ce driver usbserial

usbcore: registered new interface driver usbserial_generic

usbserial: USB Serial support registered for generic

usbcore: registered new interface driver trancevibrator

usb20_otg: version 3[    4.963865] usbcore: registered new interface driver dm9601
.10a 21-DEC-2012

e0a80040

Core Release: 3.10a

Setting default values for core params

Using Buffer DMA mode

Periodic Transfer Interrupt Enhancement - disabled

Multiprocessor Interrupt Enhan[    4.968608] usbcore: registered new interface driver dm9620
cement - disabled

OTG VER PARAM: 0, OTG VER FLAG: 0

^^^^^^^^^^^^^^^^^Device Mode

Dedicated Tx FIFOs mode

pcd_init otg_dev = dcd682c0

usb20_otg ff580000.usb: DWC OTG Controller

usb20_otg ff580000.u[    4.978491] usbcore: registered new interface driver smsc75xx
sb: new USB bus registered, assigned bus number 2

usb20_otg ff580000.usb: irq 55, io mem 0x00000000

usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

us[    4.983453] usbcore: registered new interface driver smsc95xx
b usb2: Product: DWC OTG Controller

usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd

usb usb2: SerialNumber: ff580000.usb

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 1 port detected

usb20_host: ver[    4.988193] usbcore: registered new interface driver gl620a
sion 3.10a 21-DEC-2012

e0b00040

Core Release: 3.10a

Setting default values for core params

Using Buffer DMA mode

Periodic Transfer Interrupt Enhancement - disabl[    4.992991] usbcore: registered new interface driver net1080
ed

Multiprocessor Interrupt Enhancement - disabled

OTG VER PARAM: 0, OTG VER FLAG: 0

^^^^^^^^^^^^^^^^^^Host Mode

usb20_host ff540000.usb: DWC OTG Controller

usb20_host ff540000.u[    5.002325] usbcore: registered new interface driver plusb
sb: new USB bus registered, assigned bus number 3

usb20_host ff540000.usb: irq 57, io mem 0x00000000

Init: Power Port (0)

usb usb3: New USB device found, idVendor=1d6b, idProduct=0002

usb usb3: New USB device strings: Mfr=3[    5.007444] usbcore: registered new interface driver rndis_host
, Product=2, SerialNumber=1

usb usb3: Product: DWC OTG Controller

usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd

usb usb3: SerialNumber: ff540000.usb

hub 3-0:1.0: USB hub found

hub 3-0[    5.012537] usbcore: registered new interface driver cdc_subset
:1.0: 1 port detected

++++++++remotectl_init
I cant fit more in one post :?

Hannescam
Posts: 12
Joined: 2021-06-01 10:41

Re: Linux on XORO MegaPad gives a lot of errors

#3 Post by Hannescam »

Code: Select all

++++++++remotectl driver V1.0 for linux 3.10

of_get_named_gpio_flags exited with status 257

remotectl probe j=0x0

remotectl pr[    5.017279] usbcore: registered new interface driver zaurus
obe j=0x1

remotectl probe j=0x2

remotectl probe j=0x3

remotectl probe j=0x4

remotectl probe j=0x5

input: rkxx-remotectl as /devices/rkxx-remotectl.30/input/input0

[    5.028312] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
. rk pwm remotectl v1.0 init

remotectl probe j=0x0

remotectl probe j=0x1

input: ff68[    5.033245] usbcore: registered new interface driver int51x1
0000.pwm as /devices/ff680000.pwm/input/input1

pwm enable val=0x646205 

usbcore: registered new interface driver xpad

usbcore: registered new interface driver usb_acecad

usbcore: registered new [    5.038000] usbcore: registered new interface driver kalmia
interface driver aiptek

usbcore: registered new interface driver gtco

usbcore: registered new interface driver hanwang

usbcore: registered new interface driver kbtab

usbcore: regist[    5.042707] usbcore: registered new interface driver ipheth
ered new interface driver wacom

sensor_register_slave:mma8452,id=17

sensor_register_slave:cm3217,id=44

sensor_register_slave:cm3218,id=45

of[    5.047840] usbcore: registered new interface driver sierra_net
_get_named_gpio_flags exited with status 4

rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0

i2c /dev entries driver

IR NEC protocol han[    5.062499] usbcore: registered new interface driver cx82310_eth
dler initialized

IR RC5(x) protocol handler initialized

IR RC6 protocol handler initialized

IR JVC protocol handler initialized

IR Sony protocol handler initialized

IR R[    5.067373] usbcore: registered new interface driver cdc_ncm
C5 (streamzap) protocol handler initialized

IR SANYO protocol handler initialized

IR MCE Keyboard/mouse protocol handler initialized

usbcore: registered new interface driver uvcvideo

USB Video[    5.072271] usbcore: registered new interface driver qmi_wwan
 Class driver (1.1.1)

CamSys driver version: v0.19.0,  CamSys head file version: v0.8.0

D1:camsys_mipiphy_probe_cb(163): ff910000.isp mipi [    5.077203] usbcore: registered new interface driver cdc_mbim
phy0 probe success(reg_phy: 0x0  reg_vir: 0x0  size: 0x0)

D1:camsys_mipiphy_probe_cb(160): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000  reg_vir: 0xe09d8000  size: 0x4000)

[    5.090017] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1:camsys_platform_probe(1156): ff910000.isp memory:

D1:camsys_platform_probe(11[    5.096366] ehci_rk_probe e0a00000 e0a00010
66):     Register memory (phy: 0xff910000 vir: 0xe09e0000 size: 0x10000)

D1:camsys_platform_probe(1161):     I2c memory (phy: 0x1ce14000 vir: 0xdce14000 size: 0x1000)

D1:camsys_platform_probe(1181): Probe ff910000.isp devic[    5.103158] rockchip_ehci_host ff500000.usb: Rockchip On-Chip EHCI Host Controller
e success 

device-mapper: uevent: version 1.0.3

device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redh[    5.115642] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
at.com

Bluetooth: HCI UART driver ver 2.2

Bluetooth: HCI H4 protocol initialized

Bluetooth: HCILL protocol initialized

[    5.205098] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
[    5.211905] rockchip_ehci_host ff500000.usb: USB 0.0 started, EHCI 1.00
[    5.223571] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.230028] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.235528] usb usb1: Product: Rockchip On-Chip EHCI Host Controller
[    5.239967] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
[    5.248957] usb usb1: SerialNumber: ff500000.usb
[    5.252961] hub 1-0:1.0: USB hub found
[    5.255844] hub 1-0:1.0: 1 port detected
[    5.276736] ehci_rk_probe ok
[    5.281838] usbcore: registered new interface driver cdc_acm
[    5.294288] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    5.298999] usbcore: registered new interface driver usblp
[    5.303869] usbcore: registered new interface driver cdc_wdm
[    5.309120] usbcore: registered new interface driver usb-storage
[    5.319531] usbcore: registered new interface driver ums-alauda
[    5.324750] usbcore: registered new interface driver ums-cypress
[    5.329966] usbcore: registered new interface driver ums-datafab
[    5.335325] usbcore: registered new interface driver ums_eneub6250
[    5.346504] usbcore: registered new interface driver ums-freecom
[    5.351754] usbcore: registered new interface driver ums-isd200
[    5.357026] usbcore: registered new interface driver ums-jumpshot
[    5.362071] usbcore: registered new interface driver ums-karma
[    5.373055] usbcore: registered new interface driver ums-onetouch
[    5.378204] usbcore: registered new interface driver ums-sddr09
[    5.383333] usbcore: registered new interface driver ums-sddr55
[    5.388357] usbcore: registered new interface driver ums-usbat
[    5.399035] usbcore: registered new interface driver usbserial
[    5.404822] usbcore: registered new interface driver usbserial_generic
[    5.410014] usbserial: USB Serial support registered for generic
[    5.415516] usbcore: registered new interface driver trancevibrator
[    5.424595] usb20_otg: version 3.10a 21-DEC-2012
[    5.426572] e0a80040
[    5.428569] Core Release: 3.10a
[    5.432344] Setting default values for core params
[    5.434972] Using Buffer DMA mode
[    5.439875] Periodic Transfer Interrupt Enhancement - disabled
[    5.449950] Multiprocessor Interrupt Enhancement - disabled
[    5.453295] OTG VER PARAM: 0, OTG VER FLAG: 0
[    5.456157] ^^^^^^^^^^^^^^^^^Device Mode
[    5.458531] Dedicated Tx FIFOs mode
[    5.461292] pcd_init otg_dev = dcd682c0
[    5.465865] usb20_otg ff580000.usb: DWC OTG Controller
[    5.478270] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
[    5.483168] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
[    5.489286] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    5.495702] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.505052] usb usb2: Product: DWC OTG Controller
[    5.509800] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[    5.513394] usb usb2: SerialNumber: ff580000.usb
[    5.517317] hub 2-0:1.0: USB hub found
[    5.520186] hub 2-0:1.0: 1 port detected
[    5.530237] usb20_host: version 3.10a 21-DEC-2012
[    5.534702] e0b00040
[    5.536700] Core Release: 3.10a
[    5.540476] Setting default values for core params
[    5.543063] Using Buffer DMA mode
[    5.553510] Periodic Transfer Interrupt Enhancement - disabled
[    5.558198] Multiprocessor Interrupt Enhancement - disabled
cpufreq version 1.0, suspend freq 1200 MHz

cpuidle: using governor ladder

cpuidle: using governor[    5.561506] OTG VER PARAM: 0, OTG VER FLAG: 0
 menu

Synopsys Designware Multimedia Card Interface Driver

dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a

[    5.564322] ^^^^^^^^^^^^^^^^^^Host Mode
[    5.568648] usb20_host ff540000.usb: DWC OTG Controller
dwmmc_r[    5.580846] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
ockchip ff0f0000.rksdmmc: Using internal DMA controller.

3291..dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]

m[    5.585852] usb20_host ff540000.usb: irq 57, io mem 0x00000000
mc0 : Rockchip specific MHSC: Ver 1.13 2014-09-05

of_get_named_gpio_flags: can't parse gpios property

1381..dw[    5.588060] Init: Power Port (0)
_mci_set_ios:  no card. [mmc0]

[    5.594154] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    5.606411] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.610204] usb usb3: Product: DWC OTG Controller
[    5.614958] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
381..dw_mci_set_ios:  no card. [mmc0]

rk_sdmmc: BOOT dw_mci_setup_b[    5.618551] usb usb3: SerialNumber: ff540000.usb
us: argue clk_mmc workaround out 800000Hz for init[mmc0]

dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo

dwmmc_rockchip ff0f0000.rksdmmc: 1 slots[    5.622598] hub 3-0:1.0: USB hub found
 initialized

dwmmc_rockchip ff0c0000.rksdmmc: Versio[    5.631280] hub 3-0:1.0: 1 port detected
n ID is 270a

[    5.634788] ++++++++remotectl_init
[    5.639563] ++++++++remotectl driver V1.0 for linux 3.10
dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.

3285..dw_mci_init_slot: fmin=300000, fm[    5.646701] remotectl probe j=0x0
[    5.654342] remotectl probe j=0x1
ax=50000000 [mmc1]

mmc1 : Rockchip specific MHSC: Ver 1.13 [    5.656564] remotectl probe j=0x2
2014-09-05

of_get_named_gpio_flags: can't parse g[    5.658742] remotectl probe j=0x3
pios property

1381..dw_mci_set_ios:[    5.660949] remotectl probe j=0x4
  no card. [mmc1]

[    5.663126] remotectl probe j=0x5
1381..dw_[    5.669832] input: rkxx-remotectl as /devices/rkxx-remotectl.30/input/input0
[    5.680702] .. rk pwm remotectl v1.0 init
mci_set_ios:  no card. [mmc1]

[    5.683151] remotectl probe j=0x0
[    5.685336] remotectl probe j=0x1
[    5.696902] input: ff680000.pwm as /devices/ff680000.pwm/input/input1
[    5.699920] pwm enable val=0x646205 
[    5.705212] usbcore: registered new interface driver xpad
mc0: BKOPS_EN bit is not set

mmc_host mmc0[    5.710348] usbcore: registered new interface driver usb_acecad
: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)

rk_sdmmc: BOOT dw_mci_setup_bus: ar[    5.720598] usbcore: registered new interface driver aiptek
gue clk_mmc workaround out normal clock [mmc0]

dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo

rk_sdmmc: BOOT Bus speed=50000000H[    5.725185] usbcore: registered new interface driver gtco
z,Bus width=8bits.[mmc0]

dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized

mmc0: new high speed MMC card at add[    5.730012] usbcore: registered new interface driver hanwang
ress 0001

dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a

mmcblk0: mmc0:0001 NCard  14.4 GiB 
[    5.734687] usbcore: registered new interface driver kbtab

      boot: 0x002c00000 -- 0x004c[    5.744803] usbcore: registered new interface driver wacom
00000 (32 MB)

 linuxroot: 0x132800000 -- 0x39cc00[    5.749495] sensor_register_slave:mma8452,id=17
000 (9892 MB)

dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.

 mmcblk0: p1 p23291..dw_mci_init_slo[    5.752943] sensor_register_slave:cm3217,id=44
t: fmin=200000, fmax=50000000 [mmc2]

1381..dw_mci_set_ios:  no card. [mmc1]

mmc2 : Rockchip specific MHSC: Ver[    5.756343] sensor_register_slave:cm3218,id=45
 1.13 2014-09-05

of_get_named_gpio_flags: can't par[    5.778765] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
se gpios property

1381..dw_mci_set_ios:  no card. [[    5.781338] i2c /dev entries driver
mmc2]

[    5.792867] IR NEC protocol handler initialized
[    5.796688] IR RC5(x) protocol handler initialized
[    5.800205] IR RC6 protocol handler initialized
[    5.803695] IR JVC protocol handler initialized
[    5.807277] IR Sony protocol handler initialized
381..dw_mci_set_ios:  no card. [mmc2]

[    5.817460] IR RC5 (streamzap) protocol handler initialized
1381..dw_mci_set_ios:  no card. [mmc2]

dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo

dwmmc_rockchip ff0d0000.rksdmmc: [    5.821161] IR SANYO protocol handler initialized
[    5.826058] IR MCE Keyboard/mouse protocol handler initialized
1 slots initialized

leds-gpio gpio-leds.23: pins ar[    5.831293] usbcore: registered new interface driver uvcvideo
e not configured from the driver

of_get_named_gpio_flags exited wi[    5.839945] USB Video Class driver (1.1.1)
th status 239

of_get_named_gpio_flags exited wit[    5.846296] CamSys driver version: v0.19.0,  CamSys head file version: v0.8.0
h status 11

of_get_named_gpio_flags exited with [    5.865509] D1:camsys_mipiphy_probe_cb(163): ff910000.isp mipi phy0 probe success(reg_phy: 0x0  reg_vir: 0x0  size: 0x0)
status 239

of_get_named_gpio_flags exited with [    5.877900] D1:camsys_mipiphy_probe_cb(160): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000  reg_vir: 0xe09d8000  size: 0x4000)
status 11

hidraw: raw HID events driver (C) J[    5.891203] D1:camsys_platform_probe(1156): ff910000.isp memory:
iri Kosina

usbcore: registered new i[    5.904874] D1:camsys_platform_probe(1166):     Register memory (phy: 0xff910000 vir: 0xe09e0000 size: 0x10000)
nterface driver usbhid

usbhid: USB HID core driver

ashme[    5.913862] D1:camsys_platform_probe(1161):     I2c memory (phy: 0x1ce14000 vir: 0xdce14000 size: 0x1000)
m: initialized

logger: created 256K log 'log_main'
[    5.927687] D1:camsys_platform_probe(1181): Probe ff910000.isp device success 

logger: created 256K log 'log_events[    5.934175] device-mapper: uevent: version 1.0.3
'

logger: created 256K log 'log_radio'
[    5.950766] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com

logger: created 256K log 'log_system'[    5.955102] Bluetooth: HCI UART driver ver 2.2


of_get_named_gpio_flags exited w[    5.958932] Bluetooth: HCI H4 protocol initialized
ith status 5

of_get_named_gpio_flags exited with s[    5.962613] Bluetooth: HCILL protocol initialized
tatus 5

input: rk29-keypad as /devices/ff100[    6.757883] cpufreq version 1.0, suspend freq 1200 MHz
000.adc/key.32/input/input2

of_get_named_gpio_flags exited wi[    6.761460] cpuidle: using governor ladder
th status 256

of_get_named_gpio_flags exited with s[    6.768608] cpuidle: using governor menu
tatus 231

i2c-core: driver [ES8323] using l[    6.773781] Synopsys Designware Multimedia Card Interface Driver
egacy suspend method

i2c-core: driver [ES8323] using legac[    6.779555] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
y resume method

rockchip-hdmi-spdif rockchip-hdmi-[    6.808193] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
spdif.28: ASoC: CPU DAI (null) not registered

rockchip_hdmi_spdif_audio_probe() reg[    6.813785] 3291..dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
ister card failed:-517

platform rockchip-hdmi-spdif.28: Driv[    6.824092] mmc0 : Rockchip specific MHSC: Ver 1.13 2014-09-05
er rockchip-hdmi-spdif requests probe deferral

es8323_probe:register ISR (irq=195)[    6.835682] 1381..dw_mci_set_ios:  no card. [mmc0]


[    6.867947] 1381..dw_mci_set_ios:  no card. [mmc0]
[    6.881083] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
[    6.889807] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
[    6.898263] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
[    6.906931] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
[    6.924827] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
[    6.936558] 3285..dw_mci_init_slot: fmin=300000, fmax=50000000 [mmc1]
[    6.944305] mmc1 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[    6.959982] 1381..dw_mci_set_ios:  no card. [mmc1]
[    6.981698] 1381..dw_mci_set_ios:  no card. [mmc1]
[    7.011102] mmc0: BKOPS_EN bit is not set
[    7.027097] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[    7.039674] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[    7.048301] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
[    7.058721] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=8bits.[mmc0]
[    7.063339] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
[    7.072906] mmc0: new high speed MMC card at address 0001
[    7.077440] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
[    7.085991] mmcblk0: mmc0:0001 NCard  14.4 GiB 
[    7.095798]       boot: 0x002c00000 -- 0x004c00000 (32 MB)
[    7.104527]  linuxroot: 0x132800000 -- 0x39cc00000 (9892 MB)
[    7.110082] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
[    7.120766] 3291..dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
[    7.124190]  mmcblk0: p1 p21381..dw_mci_set_ios:  no card. [mmc1]
[    7.132988] mmc2 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[    7.150671] 1381..dw_mci_set_ios:  no card. [mmc2]
[    7.180665] 1381..dw_mci_set_ios:  no card. [mmc2]
[    7.192335] 1381..dw_mci_set_ios:  no card. [mmc2]
[    7.200962] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
[    7.215906] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
[    7.227338] leds-gpio gpio-leds.23: pins are not configured from the driver
[    7.287473] hidraw: raw HID events driver (C) Jiri Kosina
[    7.302660] usbcore: registered new interface driver usbhid
[    7.305153] usbhid: USB HID core driver
[    7.316602] ashmem: initialized
[    7.326948] logger: created 256K log 'log_main'
[    7.334884] logger: created 256K log 'log_events'
[    7.346479] logger: created 256K log 'log_radio'
[    7.354253] logger: created 256K log 'log_system'
[    7.383011] input: rk29-keypad as /devices/ff100000.adc/key.32/input/input2
[    7.410717] i2c-core: driver [ES8323] using legacy suspend method
[    7.421151] i2c-core: driver [ES8323] using legacy resume method
[    7.435248] rockchip-hdmi-spdif rockchip-hdmi-spdif.28: ASoC: CPU DAI (null) not registered
[    7.446894] rockchip_hdmi_spdif_audio_probe() register card failed:-517
[    7.459883] platform rockchip-hdmi-spdif.28: Driver rockchip-hdmi-spdif requests probe deferral
[    7.468056] es8323_probe:register ISR (irq=195)
S8323 2-0010: ASoC: no dapm match for LINPUT1 --> NULL --> Left Line Mux

[    7.756380] ES8323 2-0010: ASoC: nEo dapm match for LINPUT1 --> NULL --> Left Line Mux
S8323 2-0010: ASoC: Failed to add route LINPUT1 -> NULL -> Left Line Mux

[    7.774376] ES8323 2-0010: ASoC: Failed to add routEe LINPUT1 -> NULL -> Left Line Mux
S8323 2-0010: ASoC: no dapm match for LINPUT2 --> NULL --> Left Line Mux

[    7.792342] ES8323 2-0010: ASoC: no dapm matcEh for LINPUT2 --> NULL --> Left Line Mux
S8323 2-0010: ASoC: Failed to add route LINPUT2 -> NULL -> Left Line Mux

[    7.810251] ES8323 2-E0010: ASoC: Failed to add route LINPUT2 -> NULL -> Left Line Mux
S8323 2-0010: ASoC: no dapm match for Left PGA Mux --> NULL --> Left Line Mux

[    7.828513] ES8323 2-00E10: ASoC: no dapm match for Left PGA Mux --> NULL --> Left Line Mux
S8323 2-0010: ASoC: Failed to add route Left PGA Mux -> NULL -> Left Line Mux

ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> NULL --> Right Line Mux

ES8323 2-0010: ASoC: Failed to add route RINP[    7.847255] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> NULL -> Left Line Mux
UT1 -> NULL -> Right Line Mux

ES8323 2-0010: ASoC: no dapm match for RINPU[    7.853757] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> NULL --> Right Line Mux
T2 --> NULL --> Right Line Mux

ES8323 2-0010: ASoC: Failed to add route RI[    7.868357] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> NULL -> Right Line Mux
NPUT2 -> NULL -> Right Line Mux

ES8323 2-0010: ASoC: no dapm match for Righ[    7.882617] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> NULL --> Right Line Mux
t PGA Mux --> NULL --> Right Line Mux

ES8323 2-0010: ASoC: Failed to add route Ri[    7.896878] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> NULL -> Right Line Mux
ght PGA Mux -> NULL -> Right Line Mux

ES8323 2-0010: ASoC: no dapm match for LINP[    7.911658] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> NULL --> Right Line Mux
UT1 --> LAMP --> Left PGA Mux

ES8323 2-0010: ASoC: Failed to add route LIN[    7.926439] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> NULL -> Right Line Mux
PUT1 -> LAMP -> Left PGA Mux

ES8323 2-0010: ASoC: no dapm match for LINPU[    7.941043] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left PGA Mux
T2 --> LAMP --> Left PGA Mux

ES8323 2-0010: ASoC: Failed to add route LIN[    7.955646] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left PGA Mux
PUT2 -> LAMP -> Left PGA Mux

ES8323 2-0010: ASoC: no dapm match for Diffe[    7.969567] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left PGA Mux
rential Mux --> LAMP --> Left PGA Mux

ES8323 2-0010: ASoC: Failed to add route Di[    7.983485] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left PGA Mux
fferential Mux -> LAMP -> Left PGA Mux

ES8323 2-0010: ASoC: no dapm match for RINPU[    7.998172] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> LAMP --> Left PGA Mux
T1 --> RAMP --> Right PGA Mux

ES8323 2-0010: ASoC: Failed to add route RI[    8.012858] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> LAMP -> Left PGA Mux
NPUT1 -> RAMP -> Right PGA Mux

ES8323 2-0010: ASoC: no dapm match for RINP[    8.027637] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right PGA Mux
UT2 --> RAMP --> Right PGA Mux

ES8323 2-0010: ASoC: Failed to add route RI[    8.042417] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right PGA Mux
NPUT2 -> RAMP -> Right PGA Mux

ES8323 2-0010: ASoC: no dapm match for Diff[    8.056509] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right PGA Mux
erential Mux --> RAMP --> Right PGA Mux

ES8323 2-0010: ASoC: Failed to add route D[    8.070598] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right PGA Mux
ifferential Mux -> RAMP -> Right PGA Mux

ES8323 2-0010: ASoC: no dapm match for LIN[    8.085456] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> RAMP --> Right PGA Mux
PUT1 --> LAMP --> Differential Mux

ES8323 2-0010: ASoC: Failed to add route L[    8.100312] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> RAMP -> Right PGA Mux
INPUT1 -> LAMP -> Differential Mux

ES8323 2-0010: ASoC: no dapm match for RINP[    8.115427] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Differential Mux
UT1 --> RAMP --> Differential Mux

ES8323 2-0010: ASoC: Failed to add route RI[    8.130538] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Differential Mux
NPUT1 -> RAMP -> Differential Mux

ES8323 2-0010: ASoC: no dapm match for LINP[    8.145148] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Differential Mux
UT2 --> LAMP --> Differential Mux

ES8323 2-0010: ASoC: Failed to add route L[    8.159758] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Differential Mux
INPUT2 -> LAMP -> Differential Mux

ES8323 2-0010: ASoC: no dapm match for RIN[    8.174361] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Differential Mux
PUT2 --> RAMP --> Differential Mux

ES8323 2-0010: ASoC: Failed to add route R[    8.188961] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Differential Mux
INPUT2 -> RAMP -> Differential Mux

ES8323 2-0010: ASoC: no dapm match for LIN[    8.203566] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Differential Mux
PUT1 --> LAMP --> Left Line Mux

ES8323 2-0010: ASoC: Failed to add route [    8.218166] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Differential Mux
LINPUT1 -> LAMP -> Left Line Mux

ES8323 2-0010: ASoC: no dapm match for L[    8.232522] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left Line Mux
INPUT2 --> LAMP --> Left Line Mux

ES8323 2-0010: ASoC: Failed to add rout[    8.246867] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left Line Mux
e LINPUT2 -> LAMP -> Left Line Mux

ES8323 2-0010: ASoC: no dapm match for [    8.260965] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left Line Mux
Left PGA Mux --> LAMP --> Left Line Mux

iep dpi mode inactivity

ES8323 2-0010: ASoC: Failed to add rout[    8.275062] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left Line Mux
e Left PGA Mux -> LAMP -> Left Line Mux

ES8323 2-0010: ASoC: no dapm match for [    8.289580] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> LAMP --> Left Line Mux
RINPUT1 --> RAMP --> Right Line Mux

ES8323 2-0010: ASoC: Failed to add rou[    8.291724] iep dpi mode inactivity
te RINPUT1 -> RAMP -> Right Line Mux

ES8323 2-0010: ASoC: no dapm match for R[    8.306236] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> LAMP -> Left Line Mux
INPUT2 --> RAMP --> Right Line Mux

ES8323 2-0010: ASoC: Failed to add rout[    8.320838] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right Line Mux
e RINPUT2 -> RAMP -> Right Line Mux

ES8323 2-0010: ASoC: no dapm match for [    8.330747] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right Line Mux
Right PGA Mux --> RAMP --> Right Line Mux

ES8323 2-0010: ASoC: Failed to add rou[    8.345348] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right Line Mux
te Right PGA Mux -> RAMP -> Right Line Mux

ES8323 2-0010: ASoC: mux Right Line M[    8.359607] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right Line Mux
ux has no paths

ES8323 2-0010: ASoC: mux Left Line Mux[    8.374385] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> RAMP --> Right Line Mux
 has no paths

ES8323 2-0010: ASoC: mux Right PGA Mux[    8.389165] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> RAMP -> Right Line Mux
 has no paths

ES8323 2-0010: ASoC: mux Left PGA Mux [    8.401713] ES8323 2-0010: ASoC: mux Right Line Mux has no paths
has no paths

ES8323 2-0010: ASoC: mux Differential [    8.414529] ES8323 2-0010: ASoC: mux Left Line Mux has no paths
Mux has no paths

Enter::rk[    8.427344] ES8323 2-0010: ASoC: mux Right PGA Mux has no paths
29_es8323_init----123

[    8.437685] ES8323 2-0010: ASoC: mux Left PGA Mux has no paths
[    8.448292] ES8323 2-0010: ASoC: mux Differential Mux has no paths
[    8.459394] Enter::rk29_es8323_init----123
ockchip-es8323 rockchip-es8323.29:  ES8323 HiFi <-> rockchip-i2s.0 mapping ok

[    8.486718] rockchip-es8323 rockchip-es8323.29:  ES8323 HiFi <-> rockchip-i2s.0 mapping ok
32 classifier

[    8.499302] u32  classifier
   Actions configured

[    8.507134]     Actions configured
Netfilter messages via NETLINK v0.30.

[    8.516920] Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

[    8.529343] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
tnetlink v0.93: registering with nfnetlink.

[    8.542346] ctnetlink v0.93: registering with nfnetlink.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0

[    8.556353] NF_TPROXY: Transparent proxy supportN initialized, version 4.1.0
F_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.

[    8.570915] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
t_time: kernel timezone is -0000

[    8.582825] xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team

[    8.594309] ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller

[    8.606071] arp_tables: (C) 2002 David S. Miller
TCP: cubic registered

Initializing XFRM netlink socket

NET[    8.615900] TCP: cubic registered
: Registered protocol family 10

mip6: Mobile IPv6

ip6_tables: (C) [    8.618828] Initializing XFRM netlink socket
2000-2006 Netfilter Core Team

sit: IPv6 over IPv4 tunneling driver

[    8.625337] NET: Registered protocol family 10
NET: Registered protocol family 17
[    8.627449] mip6: Mobile IPv6

NET: Registered protocol family 15

B[    8.635668] ip6_tables: (C) 2000-2006 Netfilter Core Team
ridge firewalling registered

Ebtables v2.0 registered

Bluetooth:[    8.643383] sit: IPv6 over IPv4 tunneling driver
 RFCOMM TTY layer initialized

Bluetooth: RFCOMM socket layer initial[    8.649727] NET: Registered protocol family 17
ized

Bluetooth: RFCOMM ver 1.11

Bluetooth[    8.652826] NET: Registered protocol family 15
: BNEP (Ethernet Emulation) ver 1.3

Bluetooth: BNEP filters: protocol mul[    8.660883] Bridge firewalling registered
ticast

Bluetooth: BNEP socket layer initiali[    8.663124] Ebtables v2.0 registered
zed

Bluetooth: HIDP (Human Interface Emul[    8.671356] Bluetooth: RFCOMM TTY layer initialized
ation) ver 1.2

Bluetooth: HIDP socket layer initiali[    8.679494] Bluetooth: RFCOMM socket layer initialized
zed

l2tp_core: L2TP core driver, V2.0

l2[    8.681895] Bluetooth: RFCOMM ver 1.11
tp_ppp: PPPoL2TP kernel driver, V2.0

[WLAN_RFKILL]: Enter rfkill_wlan_init[    8.690186] Bluetooth: BNEP (Ethernet Emulation) ver 1.3


[WLAN_RFKILL]: Enter rfkill_wlan_pr[    8.697962] Bluetooth: BNEP filters: protocol multicast
obe

wlan_platdata_parse_dt: wifi_chip_typ[    8.705057] Bluetooth: BNEP socket layer initialized
e = bcmwifi

[WLAN_RFKILL]: wlan_platdata_parse_d[    8.714368] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
t: enable wifi power control.

[WLAN_RFKILL]: wlan_platdata_parse_dt[    8.722999] Bluetooth: HIDP socket layer initialized
: disable wifi io reference voltage control.

[WLAN_RFKILL]: wlan_platdata_parse_d[    8.726024] l2tp_core: L2TP core driver, V2.0
t: wifi power controled by gpio.

of_get_named_gpio_flags exited with s[    8.733121] l2tp_ppp: PPPoL2TP kernel driver, V2.0
tatus 156

[WLAN_RFKILL]: wlan_platdata_parse_dt[    8.741666] [WLAN_RFKILL]: Enter rfkill_wlan_init
: get property: WIFI,poweren_gpio = 156, flags = 0.

of_get_named_gpio_flags: can't parse[    8.750476] [WLAN_RFKILL]: Enter rfkill_wlan_probe
 gpios property

of_get_named_gpio_flags exited with [    8.759622] wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
status 158

[WLAN_RFKILL]: wlan_platdata_parse_d[    8.771152] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
t: get property: WIFI,host_wake_irq = 158, flags = 0.

[WLAN_RFKILL]: rfkill_wlan_probe: in[    8.783111] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
it gpio

[WLAN_RFKILL]: rockchip_wifi_voltage_[    8.793361] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
select: wifi & sdio reference voltage: 1.8V

[WLAN_RFKILL]: Exit rfkill_wlan_probe[    8.814465] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.


[BT_RFKILL]: Enter rfkill_rk_init

[    8.848113] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
[    8.860323] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
f_get_named_gpio_flags exited with status 147

[BT_RFKILL]: bluetooth_platdata_parse[    8.874601] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
_dt: get property: uart_rts_gpios = 147.

of_get_named_gpio_flags exited with s[    8.886936] [WLAN_RFKILL]: Exit rfkill_wlan_probe
tatus 155

[BT_RFKILL]: bluetooth_platdata_parse[    8.889978] [BT_RFKILL]: Enter rfkill_rk_init
_dt: get property: BT,power_gpio = 155.

of_get_named_gpio_flags exited with status 157

[BT_RFKILL]: bluetooth_platdata_parse_[    8.923259] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
dt: get property: BT,reset_gpio = 157.

of_get_named_gpio_flags exited with status 154

[BT_RFKILL]: bluetooth_platdata_parse_[    8.942910] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 155.
dt: get property: BT,wake_gpio = 154.

of_get_named_gpio_flags exited with status 159

[BT_RFKILL]: bluetooth_platdata_parse_[    8.961702] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
dt: get property: BT,wake_host_irq = 159.

[BT_RFKILL]: Request irq for bt wakeu[    8.980323] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
p host

[BT_RFKILL]: ** disable irq

[BT_RFK[    8.999284] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
ILL]: ap6335 device registered.

rk3288-hdmi ff980000.hdmi: rk3288[    9.011026] [BT_RFKILL]: Request irq for bt wakeup host
 hdmi probe sucess.

V[    9.013625] [BT_RFKILL]: ** disable irq
FP support v0.3: implementor 41 architecture 3 part 30 [    9.025307] [BT_RFKILL]: ap6335 device registered.
variant d rev 0

rk3288_init_suspend

rk3288_suspend_in[    9.035797] rk3288-hdmi ff980000.hdmi: rk3288 hdmi probe sucess.
it enter

rk3288_suspend_init: pm_ctrbits =4001[    9.053734] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
7

gpio_get_dts_info suspend:4

gpio_get[    9.055544] rk3288_init_suspend
_dts_info resume:4

rockchip,pmic-suspend_gpios:14007a10 [    9.063745] rk3288_suspend_init enter
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0[    9.074812] rk3288_suspend_init: pm_ctrbits =40017
 0 

rockchip,pmic-resume_gpios:2007a[    9.077333] gpio_get_dts_info suspend:4
11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0[    9.082804] gpio_get_dts_info resume:4
 0 

clks_gating_suspend_init:clkgt i[    9.097874] rockchip,pmic-suspend_gpios:14007a10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
nfo ok

Registering SWP/SWPB emulation handl[    9.111889] rockchip,pmic-resume_gpios:2007a11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
er

ddrfreq: verion 1.2 20140526

ddrf[    9.123257] clks_gating_suspend_init:clkgt info ok
req: normal 456MHz video_1080p 0MHz video_4k 456MHz dualview 0MHz idle 0MHz suspend 200MHz reboot 456MHz

ddrfreq: auto-freq=0

ddrfreq: auto-[    9.134461] Registering SWP/SWPB emulation handler
freq-table[0] 240MHz

ddrfreq: auto-freq-table[1] 324MHz

d[    9.137483] ddrfreq: verion 1.2 20140526
drfreq: auto-freq-table[2] 456MHz

ddrfreq: auto-freq-table[3] 528MHz

[ d   9.151572] ddrfreq: normal 456MHz video_1080p 0MHz video_4k 456MHz dualview 0MHz idle 0MHz suspend 200MHz reboot 456MHz
[    9.153494] ddrfreq: auto-freq=0
drfreq: change freq to 456 MHz when normal

regulator-dummy: disabling

rockchip-hdmi-spdif rockch[    9.161275] ddrfreq: auto-freq-table[0] 240MHz
ip-hdmi-spdif.28: ASoC: CPU DAI (null) not registered

rockchip_hdmi_spdif_audio_pr[    9.164378] ddrfreq: auto-freq-table[1] 324MHz
obe() register card failed:-517

platform rockchip-hdmi-spdif[    9.171328] ddrfreq: auto-freq-table[2] 456MHz
.28: Driver rockchip-hdmi-spdif requests probe deferral

pcd_pullup, is_on 0

file [    9.174411] ddrfreq: auto-freq-table[3] 528MHz
system registered

android_usb gadget: M[    9.194892] regulator-dummy: disabling
ass Storage Function, version: 2009/09/11

android_usb gadget: Number o[    9.206471] rockchip-hdmi-spdif rockchip-hdmi-spdif.28: ASoC: CPU DAI (null) not registered
f LUNs=2

 lun0: LUN: removable file: [    9.216062] rockchip_hdmi_spdif_audio_probe() register card failed:-517
(no medium)

 lun1: LUN: removable file: ([    9.227693] platform rockchip-hdmi-spdif.28: Driver rockchip-hdmi-spdif requests probe deferral
no medium)

android_usb gadget: android[    9.229585] pcd_pullup, is_on 0
_usb ready

sensor_init: Probe name sen[    9.236021] file system registered
sors

sensor-dev.c v1.4 add angle [    9.245723] android_usb gadget: Mass Storage Function, version: 2009/09/11
calculation support between two gsensors 2013-09-01

[    9.257173] anrdroid_usb gadget: Number of LUNs=2
tc_hym8563 0-0051: setting system clock to 2021-06-01 14:37:23 UTC (1622558243)

[    9.267180]  lun0: LUN: removable file: (no medium)
[    9.279222]  lun1: LUN: removable file: (no medium)
[    9.285761] android_usb gadget: android_usb ready
[    9.291983] sensor_init: Probe name sensors
sbcore: registered new interface driver snd-usb-audio

ALSA device list:

  #0: RK_[    9.305655] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
ES8323

[    9.319568] rtc_hym8563 0-0051: setting system clock to 2021-06-01 14:37:23 UTC (1622558243)
ockchip-hdmi-spdif rockchip-hdmi-spdif.28:  rk-hdmi-spdif-hifi <-> rockchip-spdif mapping ok

[    9.345096] usbcore: registered new interface driver snd-usb-audio
[    9.346781] ALSA device list:
[    9.356429]   #0: RK_ES8323
[    9.375191] rockchip-hdmi-spdif rockchip-hdmi-spdif.28:  rk-hdmi-spdif-hifi <-> rockchip-spdif mapping ok
reeing unused kernel memory: 400K (c09e9000 - c0a4d000)

[    9.403643] Freeing unused kernel memory: 400K (c09e9000 - c0a4d000)
font: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '

[    9.422267] font: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
oftcursor: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '

[    9.446307] softcursor: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
itblit: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '

[    9.470763] bitblit: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
bcon: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '

[    9.494914] fbcon: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
udevd[141]: starting version 175

[    9.525365] udevd[141]: starting version 175
EXT4-fs (mmcblk0p2): recovery complete

[    9.738218] EXT4-fs (mmcblk0p2): recovery complete
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)

[    9.754062] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)

[   10.053205] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
ystemd[1]: Detected architecture 'arm'.

[   10.095941] systemd[1]: Detected architecture 'arm'.
systemd[1]: Failed to insert module 'autofs4'

[   10.150923] systemd[1]: Failed to insert module 'autofs4'
systemd[1]: Set hostname to <rabian-rock2-square>.

[   10.166240] systemd[1]: Set hostname to <rabian-rock2-square>.
systemd-sysv-generator[260]: Ignoring creation of an alias rock.service for itself

[   10.265266] systemd-sysv-generator[260]: Ignoring creation of an alias rock.service for itself
systemd[1]: Expecting device dev-ttyFIQ0.device...

[   10.444542] systemd[1]: Expecting device dev-ttyFIQ0.device...
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.

[   10.468456] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
ystemd[1]: Started Forward Password Requests to Wall Directory Watch.

[   10.489131] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
ystemd[1]: Starting Remote File Systems (Pre).

[   10.505515] systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems (Pre).

[   10.520534] systemd[1]: Reached target Remote File Systems (Pre).
ystemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.

[   10.539220] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
ystemd[1]: Starting Encrypted Volumes.

[   10.556770] systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.

[   10.570683] systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.

[   10.587475] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
ystemd[1]: Started Dispatch Password Requests to Console Directory Watch.

[   10.606717] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
ystemd[1]: Starting Swap.

[   10.620802] systemd[1]: Starting Swap.
systemd[1]: Reached target Swap.

[   10.631870] systemd[1]: Reached target Swap.
systemd[1]: Starting Root Slice.

[   10.642928] systemd[1]: Starting Root Slice.
systemd[1]: Created slice Root Slice.

[   10.654363] systemd[1]: Created slice Root Slice.
systemd[1]: Starting User and Session Slice.

[   10.666788] systemd[1]: Starting User and Session Slice.
systemd[1]: Created slice User and Session Slice.

[   10.680220] systemd[1]: Created slice User and Session Slice.
ystemd[1]: Starting Delayed Shutdown Socket.

[   10.693705] systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.

[   10.707299] systemd[1]: Listening on Delayed Shutdown Socket.
ystemd[1]: Starting /dev/initctl Compatibility Named Pipe.

[   10.721778] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.

[   10.737527] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
ystemd[1]: Starting Journal Socket (/dev/log).

[   10.752152] systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket (/dev/log).

[   10.765833] systemd[1]: Listening on Journal Socket (/dev/log).
ystemd[1]: Starting udev Control Socket.

[   10.778919] systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.

[   10.791533] systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Kernel Socket.

[   10.803975] systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.

[   10.816260] systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting Journal Socket.

[   10.828107] systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.

[   10.839538] systemd[1]: Listening on Journal Socket.
systemd[1]: Starting System Slice.

[   10.850720] systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.

[   10.861796] systemd[1]: Created slice System Slice.
systemd[1]: Starting system-getty.slice.

[   10.873326] systemd[1]: Starting system-getty.slice.
systemd[1]: Created slice system-getty.slice.

[   10.885396] systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-serial\x2dgetty.slice.

[   10.898401] systemd[1]: Starting system-serial\x2dgetty.slice.
systemd[1]: Created slice system-serial\x2dgetty.slice.

[   10.912238] systemd[1]: Created slice system-serial\x2dgetty.slice.
systemd[1]: Starting Load Kernel Modules...

[   10.926084] systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting udev Coldplug all Devices...

[   10.938791] systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Create list of required static device nodes for the current kernel...

[   10.955742] systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Set Up Additional Binary Formats.

[   10.973033] systemd[1]: Started Set Up Additional Binary Formats.
ystemd[1]: Mounted POSIX Message Queue File System.

[   10.987303] systemd[1]: Mounted POSIX Message Queue File System.
ystemd[1]: Mounted Huge Pages File System.

[   11.000314] systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started live-config contains the components that configure a live system during the boot process (late userspace)..

[   11.019773] systemd[1]: Started live-config contains the components that configure a live system during the boot process (late userspace)..
ystemd[1]: Mounting Debug File System...

[   11.039036] systemd[1]: Mounting Debug File System...
systemd[1]: Starting Journal Service...

[   11.050783] systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.

[   11.065368] systemd[1]: Started Journal Service.
systemd-udevd[291]: starting version 215

[   11.229179] systemd-udevd[291]: starting version 215
systemd-journald[277]: Received request to flush runtime journal from PID 1

[   11.396659] systemd-journald[277]: Received request to flush runtime journal from PID 1
mali ffa30000.gpu: Continuing without Mali clock control

[   11.530343] mali ffa30000.gpu: Continuing without Mali clock control
mali pd enabled

[   11.542075] mali pd enabled
clk enabled

[   11.550245] clk enabled
MALI_DVFS_STEP=4,div_dvfs=10

[   11.m559014] MALI_DVFS_STEP=4,div_dvfs=10
ali_dvfs_infotbl[0].clock=198000,min_threshold=0,max_threshold=70

mali_dvfs_infotbl[1].clock=297000[   11.572385] mali_dvfs_infotbl[0].clock=198000,min_threshold=0,max_threshold=70
,min_threshold=70,max_threshold=80

mali_dvfs_infotbl[2].clock=417000,m[   11.585397] mali_dvfs_infotbl[1].clock=297000,min_threshold=70,max_threshold=80
in_threshold=80,max_threshold=90

mali_dvfs_infotbl[3].clock=48000[   11.598474] mali_dvfs_infotbl[2].clock=417000,min_threshold=80,max_threshold=90
0,min_threshold=94,max_threshold=100

turn on mali power

mali ffa300[   11.611650] mali_dvfs_infotbl[3].clock=480000,min_threshold=94,max_threshold=100
00.gpu: GPU identified as 0x0750 r0p0 status 1mali ffa30000.gpu: Probed as [   11.613491] turn on mali power
mali0

[   11.625643] mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
=======================================================

[   11.632053] mali ffa30000.gpu: Probed as mali0
[   12.139356] =======================================================
=== Launching Wi-Fi driver! (Powered by Rockchip) ====

[   12.161514] ==== Launching Wi-Fi driver! (Powered by Rockchip) ============================
==============================

[   12.179399] =======================================================
WiFi driver (Powered by Rockchip,Ver 4.80.WFD.OOB) init.

======== PULL WL_REG_ON HIGH! ========

[WLAN_RFKILL]: rockchip_wifi_powe[   12.197607]  WiFi driver (Powered by Rockchip,Ver 4.80.WFD.OOB) init.
r: 1

[WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1

[WLAN_RFKILL]: rockc[   12.201344] ======== PULL WL_REG_ON HIGH! ========
hip_wifi_ref_voltage: wifi io reference voltage control is disabled.

[   12.211274] [WLAN_RFKILL]: rockchip_wifi_power: 1
[   12.215623] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
[   12.228643] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[WLAN_RFKILL]: wifi turn on power. 156

m[   12.333790] [WLAN_RFKILL]: wifi turn on power. 156
mc2:mmc host rescan start!

[   12.345059] mmc2:mmc host rescan start!
=========== WLAN placed in POWER ON ========

[   12.356720] =========== WLAN placed in POWER ON ========
bcmsdh_register: Linux Kernel SDIO/MMC Driver

[   12.370350] bcmsdh_register: Linux Kernel SDIO/MMC Driver


Dongle Host Driver, version 1.88.45.3 (r420671)

Compiled in drivers/net/wireless/bcmdhd on Jul  7 2015 at 19:14:12

[   12.390025] 
[   12.390025] Dongle Host Driver, version 1.88.45.3 (r420671)
[   12.390025] Compiled in drivers/net/wireless/bcmdhd on Jul  7 2015 at 19:14:12
rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc2]

[   12.564558] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc2]
mmc2: queuing unknown CIS tuple 0x80 (2 bytes)

mmc2: queuing unknown CIS tuple 0x80 (3 [   12.597153] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
bytes)

[   12.608386] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
mmc2: queuing unknown CIS tuple 0x80 (3 bytes)

mmc2: queuing unknown C[   12.623152] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
IS tuple 0x80 (7 bytes)

[   12.635791] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)

rk_sdmmc: BOOT dw_mci_setup_bus: argue clk[   12.690238] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
_mmc workaround out normal clock [mmc2]

rk_sdmmc: BOOT Bus speed=50000000Hz,Bus w[   12.707073] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
idth=4bits.[mmc2]

mmc2: new high speed SDI[   12.720741] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=4bits.[mmc2]
O card at address 0001

[WLAN_RFKILL]: rockchip_wifi_get_oob_irq[   12.732880] mmc2: new high speed SDIO card at address 0001
: Enter

alloc static buf at dcfc0000!

[   12.743044] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
FW_PATH = /lib/firmware/bcmwifi/fw_bcm4339a0_ag.bin

NVRAM_PATH = /lib/firmware/bcmwifi/nvram_AP6335.txt

F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0

DHD:[   12.745830] alloc static buf at dcfc0000!
[   12.761384] FW_PATH = /lib/firmware/bcmwifi/fw_bcm4339a0_ag.bin
[   12.761384] NVRAM_PATH = /lib/firmware/bcmwifi/nvram_AP6335.txt
 dongle ram size is set to 294912(orig 294912) at 0x0

tsk Enter, tsk = 0xc4fb0664

wl_crea[   12.768445] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0
te_event_handler(): thread:wl_event_handler:1e0 started

dhd_attach(): thread:dhd_watchdog_thread:1[   12.789422] DHD: dongle ram size is set to 294912(orig 294912) at 0x0
e1 started

dhd_attach(): thread:dhd_dpc:1e2 sta[   12.792621] tsk Enter, tsk = 0xc4fb0664
rted

dhd_attach(): thread:dhd_sysioc:1e4 starte[   12.804425] wl_create_event_handler(): thread:wl_event_handler:1e0 started
d

[WLAN_RFKILL]: rockchip_wifi_mac_addr: ent[   12.815673] dhd_attach(): thread:dhd_watchdog_thread:1e1 started
er.

[WLAN_RFKILL]: falsh wifi_custom_mac_addr=[[   12.823972] dhd_attach(): thread:dhd_dpc:1e2 started
00:00:00:00:00:00]

[WLAN_RFKILL]: This mac address is not val[   12.834785] dhd_attach(): thread:dhd_sysioc:1e4 started
id, ignored...

Broadcom Dongle Host Driver[   12.844852] [WLAN_RFKILL]: rockchip_wifi_mac_addr: enter.
: register interface [wlan0] MAC: 00:90:4c:11:22:33

======== PULL WL_REG_ON LOW! (flag = 2) ====[   12.855125] [WLAN_RFKILL]: falsh wifi_custom_mac_addr=[00:00:00:00:00:00]
====

[WLAN_RFKILL]: rockchip_wifi_power: 0

[   12.865301] [WLAN_RFKILL]: This mac address is not valid, ignored...
[   12.879003] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
[   12.890048] ======== PULL WL_REG_ON LOW! (flag = 2) ========
[   12.893438] [WLAN_RFKILL]: rockchip_wifi_power: 0
[WLAN_RFKILL]: wifi shut off power.

[WLAN_RFKILL]: rockchip_wifi_ref_voltage:[   13.002592] [WLAN_RFKILL]: wifi shut off power.
 0

[WLAN_RFKILL]: rockchip_wifi_ref_volt[   13.010911] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 0
age: wifi io reference voltage control is disabled.

=========== WLAN placed in RESET ====[   13.023757] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
====

[   13.036459] =========== WLAN placed in RESET ========
[BT_RFKILL]: ENABLE UART_RTS

[   13.120062] [BT_RFKILL]: ENABLE UART_RTS
[BT_RFKILL]: DISABLE UART_RTS

[   13.228507] [BT_RFKILL]: DISABLE UART_RTS
[BT_RFKILL]: bt turn on power

[   13.242842] [BT_RFKILL]: bt turn on power
phy_power_on: enable = 1 

[   13.335110] phy_power_on: enable = 1 
Read the Ethernet MAC address from IDB:0[   13.384764] Read the Ethernet MAC address from IDB:0:00:00:000:0:000:0:00:00:000:0

eth0: device MAC address d6:5e:a2:8d00
:ea:d0

[   13.396555] eth0: device MAC address d6:5e:a2:8d:ea:d0
libphy: stmmac: probed

eth0: PHY ID 001cc915 at 0 IR[   13.408721] libphy: stmmac: probed
Q 0 (stmmac-0:00) active

eth0: PHY ID 001cc915 at 3 IRQ 0 [   13.417031] eth0: PHY ID 001cc915 at 0 IRQ 0 (stmmac-0:00) active
(stmmac-0:03) active

[   13.427807] eth0: PHY ID 001cc915 at 3 IRQ 0 (stmmac-0:03) active
phy_power_on: enable = 0 

[   13.448632] phy_power_on: enable = 0 
phy_power_on: enable = 1 

[   13.454597] phy_power_on: enable = 1 
rk_iommu ff930300.vopb_mmu: (vopb) Disabled

rk_iommu ff930300.vopb_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x1d670000

eth0: device MAC address d6:5e:a2:8d:ea:d0

IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

rk3288-lcdc lcdc0: blank mode:1

[   13.479785] rk_iommu ff930300.vopb_mmu: (vopb) Disabled
[   13.488169] rk_iommu ff930300.vopb_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x1d670000
[   13.493717] eth0: device MAC address d6:5e:a2:8d:ea:d0
[   13.509228] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.515674] rk3288-lcdc lcdc0: blank mode:1

Dongle Host Driver, version 1.88.45.3 (r420671)

Compiled in drivers/net/wireless/bcmdhd on Jul  7 2015 at 19:14:12

[   13.555383] 
[   13.555383] Dongle Host Driver, version 1.88.45.3 (r420671)
[   13.555383] Compiled in drivers/net/wireless/bcmdhd on Jul  7 2015 at 19:14:12
l_android_wifi_on in 1

[   13.571469] wl_android_wifi_on in 1
wl_android_wifi_on in 2: g_wifi_on=0

=[   13.578147] wl_android_wifi_on in 2: g_wifi_on=0
======= PULL WL_REG_ON HIGH! (flag = 2) ========

[   13.587051] ======== PULL WL_REG_ON HIGH! (flag = 2) ==[======
WLAN_RFKILL]: rockchip_wifi_power: 1

[   13.596030] [WLAN_RFK[ILL]: rockchip_wifi_power: 1
WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1

[   13.604498] [WLAN_RFKILL]: ro[ckchip_wifi_ref_voltage: 1
WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.

[   13.617317] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[WLAN_RFKILL]: wifi turn on power. 156

=[   13.721279] [WLAN_RFKILL]: wifi turn on power. 156
========== WLAN going back to live  ========

[   13.730207] =========== WLAN going back to live  ========
sdio_reset_comm():

[   13.737323] sdio_reset_comm():
mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)

[   13.748874] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
k_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 400000Hz for init[mmc2]

[   13.766010] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 400000Hz for init[mmc2]
rk_iommu ff930300.vopb_mmu: (vopb) Enabled

rk_iommu ff930300.vopb_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x1d670000

rk3288-lcdc lcdc0: blank mode:0

[   13.779508] rk_iommu ff930300.vopb_mmu: (vopb) Enabled
[   13.791111] rk3288-lcdc lcdc0: blank mode:0
mmc2: queuing unknown CIS tuple 0x80 (2 bytes)

[   13.804415] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
mmc2: queuing unknown CIS tuple 0x80 (3 bytes)

[   13.813939] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
mmc2: queuing unknown CIS tuple 0x80 (3 bytes)

[   13.823449] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
mmc2: queuing unknown CIS tuple 0x80 (7 bytes)

[   13.832953] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)

[   13.925633] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
k_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]

[   13.942439] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaro
und out normal clock [mmc2]


dhd_bus_devreset: == WLAN ON ==

[   13.954135] 
[   13.954135] 
[   13.954135] dhd_bus_devreset: == WLAN ON ==
hd_bus_devreset called when dongle is not in reset

[   13.965686] dhd_bus_devreset called when dongle is not in reset
ill call dhd_bus_start instead

[   13.974309] Will call dhd_bus_start instead
dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/bcmwifi/fw_RK903_ag.bin

[   13.985650] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/bcmwifi/fw_RK903_ag.bin
Final fw_path=/lib/firmware/bcmwifi/fw_RK903_ag.bin

[   13.998587] Final fw_path=/lib/firmware/bcmwifi/fw_RK903_aFg.bin
inal nv_path=/lib/firmware/bcmwifi/nvram_AP6335.txt

[   14.009023] Final nv_path=/lib/firmware/bcmwifi/nvram_AP6335.txt
inal conf_path=/lib/firmware/bcmwifi/config.txt

[   14.019112] Final conf_path=/lib/firmware/bcmwifi/config.txt
NVRAM version: A[   14.056790] NVRAM version: APP63633535__NVNRVRAAMM_V_1V1.7.7__0401401022001414

One post more

Hannescam
Posts: 12
Joined: 2021-06-01 10:41

Re: Linux on XORO MegaPad gives a lot of errors

#4 Post by Hannescam »

Code: Select all


[   23.321788] =========== WLAN placed in RESET ========
wl_android_wifi_on: Failed

d[   23.329559] wl_android_wifi_on: Failed
hd_open : wl_android_wifi_on failed (-19)

[   23.337509] dhd_open : wl_android_wifi_on failed (-19)
wl_android_wifi_off in 1

[   23.345140] wl_android_wifi_off in 1
wl_android_wifi_off in 2: g_wifi_on=0

wl_android_wifi_off out

IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[   23.352512] wl_android_wifi_off in 2: g_wifi_on=0
[   23.355626] wl_android_wifi_off out
[   23.363428] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready


Dongle Host Driver, version 1.88.45.3 (r420671)

Compiled in drivers/net/wireless/bcmdhd on Jul  7 2015 at 19:14:12

[   23.461687] 
[   23.461687] Dongle Host Driver, version 1.88.45.3 (r420671)
[   23.461687] Compiled in drivers/net/wireless/bcmdhd on Jul  7 2015 at 19:14:12
l_android_wifi_on in 1

[   23.478064] wl_android_wifi_on in 1
wl_android_wifi_on in 2: g_wifi_on=0

[   23.484800] wl_and=roid_wifi_on in 2: g_wifi_on=0
======= PULL WL_REG_ON HIGH! (flag = 2) ========

[   23.493690] ======== PULL WL_REG_ON HIGH! (flag = 2) ========
WLAN_RFKILL]: rockchip_wifi_power: 1

[   23.502581] [WLAN[_RFKILL]: rockchip_wifi_power: 1
WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1

[   23.5[11046] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.

[   23.523862] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[WLAN_RFKILL]: wifi turn on power. 156

=[   23.630534] [WLAN_RFKILL]: wifi turn on power. 156
========== WLAN going back to live  ========

[   23.639785] =========== WLAN going back to live  ========
sdio_reset_comm():

[   23.647111] sdio_reset_comm():
mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)

[   23.659680] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
k_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 400000Hz for init[mmc2]

[   23.677364] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 400000Hz for init[mmc2]
mmc2: queuing unknown CIS tuple 0x80 (2 bytes)

[   23.704361] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
mmc2: queuing unknown CIS tuple 0x80 (3 bytes)

[   23.714458] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
mmc2: queuing unknown CIS tuple 0x80 (3 bytes)

[   23.724518] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
mmc2: queuing unknown CIS tuple 0x80 (7 bytes)

[   23.735458] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)

[   23.843461] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
k_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]

[   23.860965] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]


dhd_bus_devreset: == WLAN ON ==

[   23.872924] 
[   23.872924] 
[   23.872924] dhd_bus_devreset: == WLAN ON ==
dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/bcmwifi/fw_RK903_ag.bin

[   23.892451] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/bcmwifi/fw_RK903_ag.bin
inal fw_path=/lib/firmware/bcmwifi/fw_RK903_ag.bin

[   23.905269] Final fw_path=/Flib/firmware/bcmwifi/fw_RK903_ag.bin
inal nv_path=/lib/firmware/bcmwifi/nvram_AP6335.txt

[   23.915699] Final nv_path=/lib/firmwaFre/bcmwifi/nvram_AP6335.txt
inal conf_path=/lib/firmware/bcmwifi/config.txt

[   23.925869] Final conf_path=/lib/firmware/bcmwifi/config.txt
NVRAM version: A[   23.951242] NVRAM version: AP6P363353_5N_VNRVARMA_MV_1V.17._70_40140120020141
4

bcmsdh_sdmmc: enable F2 failed:-62[ b  25.991068] bcmsdh_sdmmc: enable F2 failed:-62cmsdh_sdmmc: Failed to Write byte F0:@0x00002=06, Err: -62

bcmsdh_sdmmc: Failed to Write byte F0:@0x00002=06, Err: -62
bcmsdh_sdmmc: enable F2 failed:-62[   27.978749] bcmsdh_sdmmc:b enable F2 failed:-62cmsdh_sdmmc: Failed to Write byte F0:@0x00002=06, Err: -62

bcmsdh_sdmmc: Failed to Write byte F0:@0x00002=06, Err: -62
bcmsdh_sdmmc: enable F2 failed:-62[ b  29.966431] bcmsdh_sdmmc: enable F2 failed:-62cmsdh_sdmmc: Failed to Write byte F0:@0x00002=06, Err: -62
...
Yes thats a lot of errors :shock:

arzgi
Posts: 1185
Joined: 2008-02-21 17:03
Location: Finland
Been thanked: 31 times

Re: Linux on XORO MegaPad gives a lot of errors

#5 Post by arzgi »

There are some gazillion Debian based distros, better seek help from their own forums/web-sites.

We focus here on Debian.

Hannescam
Posts: 12
Joined: 2021-06-01 10:41

Re: Linux on XORO MegaPad gives a lot of errors

#6 Post by Hannescam »

Hello arzgi,

It is not Debian, it is Rabian but it is so similar to Debian and it didn't exist a Rabian forum,
that is why im posting on this forum!
:D

I hope anyone can help!
:wink:

arzgi
Posts: 1185
Joined: 2008-02-21 17:03
Location: Finland
Been thanked: 31 times

Re: Linux on XORO MegaPad gives a lot of errors

#7 Post by arzgi »

So why don't you ask in the raspian-forums?

Hannescam
Posts: 12
Joined: 2021-06-01 10:41

Re: Linux on XORO MegaPad gives a lot of errors

#8 Post by Hannescam »

it isn't a raspberry pi

arzgi
Posts: 1185
Joined: 2008-02-21 17:03
Location: Finland
Been thanked: 31 times

Re: Linux on XORO MegaPad gives a lot of errors

#9 Post by arzgi »

Raspberry Pi is a SoC computer.

Rasbian is a operating system, Debian based as Ubuntu, Kali, etc. There are so many, I and most of us do not know and care what they have done to Debian so that it comes a new OS.

I suggest again those forums, and good to learn to use search engines too.

https://www.makeuseof.com/tag/how-to-linux-on-android/

Hannescam
Posts: 12
Joined: 2021-06-01 10:41

Re: Linux on XORO MegaPad gives a lot of errors

#10 Post by Hannescam »

my device is a RK3288 (in ASUS tinker board) (has NO bios only the emmc) based tablet with LVDS display interface and i want to run Linux natively the only Android version ruining on this device is Android 5.1
Last edited by Hannescam on 2021-06-02 13:55, edited 1 time in total.

arzgi
Posts: 1185
Joined: 2008-02-21 17:03
Location: Finland
Been thanked: 31 times

Re: Linux on XORO MegaPad gives a lot of errors

#11 Post by arzgi »

Great!

Hannescam
Posts: 12
Joined: 2021-06-01 10:41

Re: Linux on XORO MegaPad gives a lot of errors

#12 Post by Hannescam »

what means great

Hannescam
Posts: 12
Joined: 2021-06-01 10:41

Re: Linux on XORO MegaPad gives a lot of errors

#13 Post by Hannescam »

tinkerOS doesn't boot
Last edited by Hannescam on 2021-06-03 15:44, edited 1 time in total.

arzgi
Posts: 1185
Joined: 2008-02-21 17:03
Location: Finland
Been thanked: 31 times

Re: Linux on XORO MegaPad gives a lot of errors

#14 Post by arzgi »

Still not Debian, why report here?

Hannescam
Posts: 12
Joined: 2021-06-01 10:41

Re: Linux on XORO MegaPad gives a lot of errors

#15 Post by Hannescam »

can you say me on what forum i should post

arzgi
Posts: 1185
Joined: 2008-02-21 17:03
Location: Finland
Been thanked: 31 times

Re: Linux on XORO MegaPad gives a lot of ors

#16 Post by arzgi »

You should find out yourself, perhaps linux questions. Did you even check the link I gave?

Another path would check those errors you got when you tried raspbian Quite many of them where same just number changed if you cannot not find answers, I repeat myself, if you use raspbian, best advice would be raspberry-forums, since they know raspbian.

Hannescam
Posts: 12
Joined: 2021-06-01 10:41

Re: Linux on XORO MegaPad gives a lot of errors

#17 Post by Hannescam »

that isn't a raspberry pi Raspbian only works on raspberrys

Hannescam
Posts: 12
Joined: 2021-06-01 10:41

Re: Linux on XORO MegaPad gives a lot of errors

#18 Post by Hannescam »

i didn't use Raspbian i used Rabian this link (website: https://wiki.radxa.com/Rock/prebuilt_images download: https://dl.radxa.com/rock2/images/rabian/emmc/)

User avatar
sunrat
Administrator
Administrator
Posts: 6412
Joined: 2006-08-29 09:12
Location: Melbourne, Australia
Has thanked: 116 times
Been thanked: 462 times

Re: Linux on XORO MegaPad gives a lot of errors

#19 Post by sunrat »

Moving thread to Offtopic as it is not about Debian.
“ computer users can be divided into 2 categories:
Those who have lost data
...and those who have not lost data YET ”
Remember to BACKUP!

Post Reply