Scheduled Maintenance: We are aware of an issue with Google, AOL, and Yahoo services as email providers which are blocking new registrations. We are trying to fix the issue and we have several internal and external support tickets in process to resolve the issue. Please see: viewtopic.php?t=158230
Linux on XORO MegaPad gives a lot of errors
Linux on XORO MegaPad gives a lot of errors
Hello,
I have a XORO MegaPad 1564 V2 (link: https://www.xoro.de/produkte/details/xo ... d-1564-v2/) and I want on this to run Linux, most of the tutorials failed.
I have found a German website (link: https://www.foxplex.com/sites/linux-auf ... tallieren/) on that is a guide how to install Linux on RK3288 and similar chips.
The guide on the German website has the link to the image not available,
but I found an other image (Rabian a Debian based Linux) on the internet (website: https://wiki.radxa.com/Rock/prebuilt_images download:https://dl.radxa.com/rock2/images/rabian/emmc/).
I installed it without errors on the device. It booted, but it gives to much errors to control it on the serial Linux console, it doesn't connect to the internet.
(I use Linux every time, but i have also Windows 10)
The full log of the boot (it repeats after login shell repeats infinitely):
I have a XORO MegaPad 1564 V2 (link: https://www.xoro.de/produkte/details/xo ... d-1564-v2/) and I want on this to run Linux, most of the tutorials failed.
I have found a German website (link: https://www.foxplex.com/sites/linux-auf ... tallieren/) on that is a guide how to install Linux on RK3288 and similar chips.
The guide on the German website has the link to the image not available,
but I found an other image (Rabian a Debian based Linux) on the internet (website: https://wiki.radxa.com/Rock/prebuilt_images download:https://dl.radxa.com/rock2/images/rabian/emmc/).
I installed it without errors on the device. It booted, but it gives to much errors to control it on the serial Linux console, it doesn't connect to the internet.
(I use Linux every time, but i have also Windows 10)
The full log of the boot (it repeats after login shell repeats infinitely):
Re: Linux on XORO MegaPad gives a lot of errors
Code: Select all
DDR Version 1.00 20141007
In
Channel a: LPDDR3 200MHz
MR0=0x8
MR1=0x8
MR2=0x8
MR3=0x8
MR4=0x2
MR5=0x1
MR6=0x1
MR7=0x0
MR8=0x1B
MR9=0x1B
MR10=0x1B
MR11=0x1B
MR12=0x1B
MR13=0x1B
MR14=0x1B
MR15=0x1B
MR16=0x1B
Bus Width=32 Col=10 Bank=8 Row=14 CS=2 Die Bus-Width=32 Size=1024MB
Channel b: LPDDR3 200MHz
MR0=0x8
MR1=0x8
MR2=0x8
MR3=0x8
MR4=0x2
MR5=0x1
MR6=0x1
MR7=0x0
MR8=0x1B
MR9=0x1B
MR10=0x1B
MR11=0x1B
MR12=0x1B
MR13=0x1B
MR14=0x1B
MR15=0x1B
MR16=0x1B
Bus Width=32 Col=10 Bank=8 Row=14 CS=2 Die Bus-Width=32 Size=1024MB
Memory OK
Memory OK
OUT
U-Boot 2014.10-RK3288-01-ga179054 (Jul 20 2015 - 13:53:05)
CPU: rk3288
CPU's clock information:
arm pll = 600000000HZ
periph pll = 297000000HZ
ddr pll = 200000000HZ
codec pll = 384000000HZ
Board: Rockchip platform Board
DRAM: Found dram banks:1
Adding bank:0000000000000000(0000000080000000)
128 MiB
storage init OK!
Using default environment
GetParam
check parameter success
Unknow param: MACHINE_MODEL:rock2!
Unknow param: MACHINE_ID:007!
Unknow param: MANUFACTURER:RADXA!
power key: bank-0 pin-5
pmic:act8846
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2015-07-20#2.19
empty serial no.
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo_on switch from dts [0]
no fuel gauge found
failed to find part:misc
misc partition not found!
Hit any key to stop autoboot: 1 0
kernel @ 0x02000000 (0x005951a0)
ramdisk @ 0x04bf0000 (0x004c0c00)
Secure Boot state: 0
bootrk: do_bootm_linux...
Loading Device Tree to 0480f000, end 0482913a ... OK
Add bank:0000000000000000, 0000000080000000
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x500
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0 (root@radxa-x2) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #3 SMP PREEMPT Sat Jul 11 16:19:57 CST 2015
CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
hdmi init vic is -1
rockchip_ion_reserve
cma: CMA: reserved 16 MiB at 1dc00000
Memory policy: ECC disabled, Data cache writealloc
On node 0 totalpages: 524288
free_area_init_node: node 0, pgdat c0acd840, node_mem_map c0bec000
Normal zone: 984 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 125952 pages, LIFO batch:31
HighMem zone: 3112 pages used for memmap
HighMem zone: 398336 pages, LIFO batch:31
PERCPU: Embedded 9 pages/cpu @c1c1f000 s14016 r8192 d14656 u36864
pcpu-alloc: s14016 r8192 d14656 u36864 alloc=9*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523304
Kernel command line: vmalloc=516M console=ttyFIQ0 console=tty0 init=/sbin/init root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait mtdparts=rk29xxnand:0x00010000@0x00016000(boot),-@0x00994000(linuxroot) storagemedia=emmc loader.timestamp=2015-07-20_13:53:05 hdmi.vic=-1
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 2048MB = 2048MB total
Memory: 2046420k/2046420k available, 50732k reserved, 1593344K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xdf000000 - 0xff000000 ( 512 MB)
lowmem : 0xc0000000 - 0xdec00000 ( 492 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc09e8a6c (10115 kB)
.init : 0xc09e9000 - 0xc0a4d6c0 ( 402 kB)
.data : 0xc0a4e000 - 0xc0ad4fa8 ( 540 kB)
.bss : 0xc0ad4fa8 - 0xc0beb744 (1114 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16 nr_irqs:16 16
rk_clk_tree_init start! cru base = 0xfed00000
rk_get_uboot_display_flag: uboot_logo_on = 0
rkclk_init_clks: cnt_parent = 7
rkclk_init_clks: cnt_rate = 32
Architected local timer running at 24.00MHz (phys).
Switching to timer-based delay loop
sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
process version: 0
channel:0, lkg:0
target-temp:95
channel:2, lkg:0
target-temp:95
channel:0, lkg:0
target-temp:95
channel:1, lkg:0
target-temp:95
sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
Console: colour dummy device 80x30
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
/cpus/cpu@0 missing clock-frequency property
/cpus/cpu@1 missing clock-frequency property
/cpus/cpu@2 missing clock-frequency property
/cpus/cpu@3 missing clock-frequency property
CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
Setting up static identity map for 0xc0719c18 - 0xc0719c70
last_log: 0x1d500000 map to 0xdf004000 and copy to 0xdf086000, size 0x80000 early 0x1398 (version 3.0)
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
CPU2: Booted secondary processor
CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
CPU3: Booted secondary processor
CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
Brought up 4 CPUs
SMP: Total of 4 processors activated (192.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
ion_snapshot: 0x1d5b0000 map to 0xdf107000 and copy to 0xc0bc6d94 (version 0.1)
Registered FIQ tty driver
<hit enter to activate fiq debugger>
[ 0.000000] Booting Linux on physical CPU 0x500
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.0 (root@radxa-x2) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #3 SMP PREEMPT Sat Jul 11 16:19:57 CST 2015
[ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
[ 0.000000] hdmi init vic is -1
[ 0.000000] rockchip_ion_reserve
[ 0.000000] cma: CMA: reserved 16 MiB at 1dc00000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c1c1f000 s14016 r8192 d14656 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523304
[ 0.000000] Kernel command line: vmalloc=516M console=ttyFIQ0 console=tty0 init=/sbin/init root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait mtdparts=rk29xxnand:0x00010000@0x00016000(boot),-@0x00994000(linuxroot) storagemedia=emmc loader.timestamp=2015-07-20_13:53:05 hdmi.vic=-1
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 2048MB = 2048MB total
[ 0.000000] Memory: 2046420k/2046420k available, 50732k reserved, 1593344K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf000000 - 0xff000000 ( 512 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdec00000 ( 492 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc09e8a6c (10115 kB)
[ 0.000000] .init : 0xc09e9000 - 0xc0a4d6c0 ( 402 kB)
[ 0.000000] .data : 0xc0a4e000 - 0xc0ad4fa8 ( 540 kB)
[ 0.000000] .bss : 0xc0ad4fa8 - 0xc0beb744 (1114 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] rk_clk_tree_init start! cru base = 0xfed00000
[ 0.000000] rk_get_uboot_display_flag: uboot_logo_on = 0
[ 0.000000] rkclk_init_clks: cnt_parent = 7
[ 0.000000] rkclk_init_clks: cnt_rate = 32
[ 0.000000] Architected local timer running at 24.00MHz (phys).
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
[ 0.000000] process version: 0
[ 0.000000] channel:0, lkg:0
[ 0.000000] target-temp:95
[ 0.000000] channel:2, lkg:0
[ 0.000000] target-temp:95
[ 0.000000] channel:0, lkg:0
[ 0.000000] target-temp:95
[ 0.000000] channel:1, lkg:0
[ 0.000000] target-temp:95
[ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.805345] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.811788] pid_max: default: 32768 minimum: 301
[ 0.815155] Security Framework initialized
[ 0.817569] SELinux: Initializing.
[ 0.825000] Mount-cache hash table entries: 512
[ 0.830260] Initializing cgroup subsys debug
[ 0.833763] Initializing cgroup subsys freezer
[ 0.837361] CPU: Testing write buffer coherency: ok
[ 0.842855] /cpus/cpu@0 missing clock-frequency property
[ 0.847302] /cpus/cpu@1 missing clock-frequency property
[ 0.851689] /cpus/cpu@2 missing clock-frequency property
[ 0.856069] /cpus/cpu@3 missing clock-frequency property
[ 0.860930] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
[ 0.866708] Setting up static identity map for 0xc0719c18 - 0xc0719c70
[ 0.880251] last_log: 0x1d500000 map to 0xdf004000 and copy to 0xdf086000, size 0x80000 early 0x1398 (version 3.0)
[ 0.963534] CPU1: Booted secondary processor
[ 0.968317] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
[ 0.983272] CPU2: Booted secondary processor
[ 0.988046] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
[ 1.003051] CPU3: Booted secondary processor
[ 1.007823] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
[ 1.009980] Brought up 4 CPUs
[ 1.015671] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[ 1.019306] CPU: All CPU(s) started in SVC mode.
[ 1.023757] devtmpfs: initialized
[ 1.045297] pinctrl core: initialized pinctrl subsystem
[ 1.049086] regulator-dummy: no parameters
[ 1.054189] NET: Registered protocol family 16
[ 1.065216] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 1.073876] ion_snapshot: 0x1d5b0000 map to 0xdf107000 and copy to 0xc0bc6d94 (version 0.1)
[ 1.076957] Registered FIQ tty driver
onsole [ttyFIQ0] enabled
[ 1.537184] console [ttyFIQ0] enabled
Registered fiq debugger ttyFIQ0
[ 1.543955] Registered fiq debugger ttyFIQ0
rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
[ 1.554340] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
ockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
[ 1.567938] rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
ockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
[ 1.582059] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
ockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
[ 1.596171] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
ockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
[ 1.612350] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
ockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
[ 1.630509] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
ockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
[ 1.648670] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
ockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
[ 1.666826] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
ockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
[ 1.684987] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
ockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
[ 1.703148] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
ockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
[ 1.721307] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
ockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
[ 1.739467] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
ockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
[ 1.757722] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
ockchip_pinctrl_probe:name=RK3288-GPIO,type=3
[ 1.771653] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
[ 1.783317] rockchip_pinctrl_probe:name=base start=0xff7700r00,end=0xff77013f
ockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
[ 1.796522] rockchip_pinctrl_probe:name=pull start=0rxff770140,end=0xff7701bf
ockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
[ 1.809630] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
piochip_add: registered GPIOs 0 to 31 on device: gpio0
gpiochip_add: registered GPIOs 32 to 63 on device: gpio1
gpiochip_add: registered GPIOs 64 to 95 on device: gpio2
gpiochip_add: registered GPIOs 96 to 127 on device: gpio3
gpiochip_add: registered GPIOs 128 to 159 on device: gpio4
gpiochip_add: registered GPIOs 160 to 191 on device: gpio5
gpiochip_add: registered GPIOs 192 to 223 on device: gpio6
gpiochip_add: registered GPIOs 224 to 255 on device: gpio7
gpiochip_add: registered GPIOs 256 to 287 on device: gpio8
gpiochip_add: registered GPIOs 288 to 319 on device: gpio15
rockchip_interrupts_register:bank_num=7
[ 1.877707] rockchip_interrupts_register:bank_num=7
of_get_named_gpio_flags exited with status 13
of_get_gpio_init_config:gpio[0] = 13, value = 1
[ 1.893550] of_get_gpio_init_config:gpio[0] = 13, value = 1
rockchip_pinctrl_probe:init ok
[ 1.902120] rockchip_pinctrl_probe:init ok
rk_iommu ff900800.iep_mmu: (iep) Enter
[ 1.926600] rrk_iommu ff900800.iep_mmu: (iep) Enter
k_iommu ff900800.iep_mmu: data->num_res_mem=1
rk_iommu ff900800.iep_mmu: data->num_res_irq=1
rk_iommu ff900800.iep_mmu: res->start = 0xff900800 ioremap to data->res_bases[0] = 0xdf114800
IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 1.954763]r IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
k_iommu ff900800.iep_mmu: (iep) Initialized
[ 1.964899] rk_iommu ff900800.iep_mmu: (iep) Initialized
rk_iommu ff950800.vip_mmu: (vip) Enter
[ 1.973947] rrk_iommu ff950800.vip_mmu: (vip) Enter
k_iommu ff950800.vip_mmu: data->num_res_mem=1
rk_iommu ff950800.vip_mmu: data->num_res_irq=1
rk_iommu ff950800.vip_mmu: res->start = 0xff950800 ioremap to data->res_bases[0] = 0xdf116800
IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 2.002085r] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
k_iommu ff950800.vip_mmu: (vip) Initialized
[ 2.012221] rk_iommu ff950800.vip_mmu: (vip) Initialized
rk_iommu ff930300.vopb_mmu: (vopb) Enter
[ 2.021456] rkr_iommu ff930300.vopb_mmu: (vopb) Enter
k_iommu ff930300.vopb_mmu: data->num_res_mem=1
rk_iommu ff930300.vopb_mmu: data->num_res_irq=1
rk_iommu ff930300.vopb_mmu: res->start = 0xff930300 ioremap to data->res_bases[0] = 0xdf11e300
IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 2.050059r] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
k_iommu ff930300.vopb_mmu: (vopb) Initialized
[ 2.060381] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
rk_iommu ff940300.vopl_mmu: (vopl) Enter
[ 2.069789]r rk_iommu ff940300.vopl_mmu: (vopl) Enter
k_iommu ff940300.vopl_mmu: data->num_res_mem=1
rk_iommu ff940300.vopl_mmu: data->num_res_irq=1
rk_iommu ff940300.vopl_mmu: res->start = 0xff940300 ioremap to data->res_bases[0] = 0xdf12a300
IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 2.098379r] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
k_iommu ff940300.vopl_mmu: (vopl) Initialized
[ 2.108700] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
[ 2.118107] rrk_iommu ff9c0440.hevc_mmu: (hevc) Enter
k_iommu ff9c0440.hevc_mmu: data->num_res_mem=2
rk_iommu ff9c0440.hevc_mmu: data->num_res_irq=1
rk_iommu ff9c0440.hevc_mmu: res->start = 0xff9c0440 ioremap to data->res_bases[0] = 0xdf12c440
rk_iommu ff9c0440.hevc_mmu: res->start = 0xff9c0480 ioremap to data->res_bases[1] = 0xdf12e480
IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 2.155969] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000r.
k_iommu ff9c0440.hevc_mmu: (hevc) Initialized
[ 2.166292] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
[ 2.175514] rrk_iommu ff9a0800.vpu_mmu: (vpu) Enter
k_iommu ff9a0800.vpu_mmu: data->num_res_mem=1
rk_iommu ff9a0800.vpu_mmu: data->num_res_irq=1
rk_iommu ff9a0800.vpu_mmu: res->start = 0xff9a0800 ioremap to data->res_bases[0] = 0xdf136800
IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 2.2036r41] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
k_iommu ff9a0800.vpu_mmu: (vpu) Initialized
[ 2.213775] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
[ 2.223198]r rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
k_iommu ff914000.isp_mmu: data->num_res_mem=2
rk_iommu ff914000.isp_mmu: data->num_res_irq=1
rk_iommu ff914000.isp_mmu: res->start = 0xff914000 ioremap to data->res_bases[0] = 0xdf138000
rk_iommu ff914000.isp_mmu: res->start = 0xff915000 ioremap to data->res_bases[1] = 0xdf13a000
IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 2.260847] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
k_iommu ff914000.isp_mmu: (isp_mmu) Initialized
[ 2.271272] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 2.284140] hw-breakpoint: found 5 (+1 reserved) breakpoihnt and 4 watchpoint registers.
w-breakpoint: maximum watchpoint size is 4 bytes.
[ 2.296994] hw-breakpoint: maximum watchpoint size is 4 bytes.
DDR DEBUG: version 1.00 20140603
[ 2.306091] DDR DEBUG: version 1.00 20140603D
DR DEBUG: Channel a:
[ 2.312717] DDR DEBUG: Channel a:
DDR DEBUG: LPDDR3 Device
[ 2.318570] DDRD DEBUG: LPDDR3 Device
DR DEBUG: Bus Width=32 Col=10 Bank=8 Row=14 CS=2 Total Capability=1024MB
[ 2.329186] DDR DEBUG: Bus Width=32 CoDl=10 Bank=8 Row=14 CS=2 Total Capability=1024MB
DR DEBUG: Channel b:
[ 2.339224] DDR DEBUG: ChanneDl b:
DR DEBUG: LPDDR3 Device
[ 2.345069D] DDR DEBUG: LPDDR3 Device
DR DEBUG: Bus Width=32 Col=10 Bank=8 Row=14 CS=2 Total Capability=1024MB
[ 2.355683] DDR DEBUG: Bus WidthD=32 Col=10 Bank=8 Row=14 CS=2 Total Capability=1024MB
DR DEBUG: addr=0xada000
[ 2.365907] DDR DEBUG: addr=0xada000
DDR DEBUG: stride=9, size=256, halfcap=40000000
[D 2.374080] DDR DEBUG: stride=9, size=256, halfcap=40000000
DR DEBUG: socAddr[0]=0xada000, socAddr[1]=0xada100
[ 2.384601] DDR DEBUG: socAddr[0]=D0xada000, socAddr[1]=0xada100
DR DEBUG: chAddr[0]=0xada000, chAddr[1]=0xada000
[ 2.395275] DDR DEBUG: chAddr[0]=0xada0D00, chAddr[1]=0xada000
DR DEBUG: dtar[0]=0x2015b000, dtar[1]=0x2015b000
[ 2.405779] DDR DEBUG: dtar[0]=0x2015b000, dtar[1]=0x2015b000
DR DEBUG: init success!!! freq=200MHz
D[ 2.415167] DDR DEBUG: init success!!! freq=200MHz
DR DEBUG: Channel a:
[ 2.422193] DDR DEBUG: Channel a:
DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
[ 2.434321] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERDR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
DR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
[ 2.452377] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTDIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
DR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
[ 2.470434] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIEDRR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
DR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
[ 2.488490] DDR DEBUG: DTONE=0x3, DTERR=0x0,D DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
DR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[ 2.503824] DDR DEBUG: ZERR=0, ZDODNE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
DR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[ 2.515164] DDR DEBUG: DRV Pull-UDp=0x19, DRV Pull-Dwn=0x19
DR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
D[ 2.524943] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
DR DEBUG: Channel b:
[ 2.532481] DDR DEBUG: Channel b:
DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
[ 2.544608] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIDERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
DR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
[ 2.562663] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIDERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
DR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
[ 2.580719] DDR DEBUG: DTONE=0x3, DTERR=0x0, DDTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
DR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
[ 2.598775] DDR DEBUG: DTONE=0x3, DTERR=0x0, DDTIERR=0x0, DTPASS=4,4, DGSL=1,1 extra clock, DGPS=270,270
DR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[ 2.614110] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0xD0, OPD=0x0, OPU=0x0
DR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[ 2.625449] DDR DEBUG: DRV Pull-UDp=0x19, DRV Pull-Dwn=0x19
DR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[ 2.635230] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
bio: create slab <bio-0> at 0
[ 2.701776] bio: create slab <bio-0> at 0
SCSI subsystem initialized
[ 2.708433] SCSI subsystem initialized
usbcore: registered new interface driver usbfs
[ 2.716710] usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
[ 2.726506] usbcore: registered new interface driver hub
usbcore: registered new device driver usb
[ 2.735840] usbcore: registered new device driver usb
of_get_named_gpio_flags exited with status 14
of_get_named_gpio_flags exited with status 12
of_get_named_gpio_flags exited with status 15
of_get_named_gpio_flags exited with status 16
rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
[ 2.766081] rockchipi_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
2c i2c-0: of_i2c: modalias failure on /i2c@ff650000/rk808@1b
[ 2.778166] i2c i2c-0: of_i2c: modalias failure on /i2c@ff650000/rk808@1b
of_get_named_gpio_flags exited with status 260
of_get_named_gpio_flags exited with status 261
rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
[ 2.799796] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
of_get_named_gpio_flags exited with status 201
of_get_named_gpio_flags exited with status 202
rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
[ 2.820813] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
of_get_named_gpio_flags exited with status 81
of_get_named_gpio_flags exited with status 80
rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
[ 2.841649] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
f_get_named_gpio_flags exited with status 241
of_get_named_gpio_flags exited with status 242
rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
[ 2.862580] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
usb_battery_charger_detect_synop , battery_charger_detect 1, pass DCD, dcd_state = 1
[ 2.876817] usb_battery_charger_detect_synop , battery_charger_detect 1, pass DCD, dcd_state = 1
edia: Linux media interface: v0.10
[ 2.888952] media: Linux media interface: v0.10
Linux video capture interface: v2.00
[ 2.897051] Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
[ 2.905608] pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.919007] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
TP clock support registered
[ 2.930816] PTP clock support registered
rockchip_temp_probe,line=362
[ 2.937555] rockchip_temp_probe,line=362
tsadc ff280000.tsadc: initialized
[ 2.944775] tsadc ff280000.tsadc: initialized
rockchip_ion_parse_dt: num_heaps = 1
[ 2.952713] roc0kchip_ion_parse_dt: num_heaps = 1
: 0 3 vmalloc 0x (null)
[ 2.960246] 0: 0 3 vmalloc 0x (null)
Rockchip ion module is successfully loaded (v1.0)
[ 2.969042] Rockchip ion module is successfully loaded (v1.0)
Advanced Linux Sound Architecture Driver Initialized.
[ 2.979940] Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.16
[ 2.988461] Bluetooth: Core ver 2.16
NET: Registered protocol family 31
[ 2.995439] NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
[ 3.005322] Bluetooth: HCI device and connection manager initBalized
luetooth: HCI socket layer initialized
[ 3.015411] Bluetooth: HCI socket layer initializedB
luetooth: L2CAP socket layer initialized
[ 3.024315] Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
[ 3.033201] Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
[ 3.043512] cfg80211: Calling CRDA to update world regulatory domain
act8846_i2c_probe,line=879
[ 3.052477] act8846_i2c_probe,line=879
act8846_parse_dt,line=744
[ 3.058780] act8846_parse_dt,line=744
of_get_named_gpio_flags exited with status 258
of_get_named_gpio_flags exited with status 10
act8846_i2c_probe: act8846_pmic_hold=1
[ 3.075290] act8846_i2c_probe: act8846_pamic_hold=1
ct8846_i2c_probe: act8846_pmic_sleep=1
[ 3.083923] act8846_i2c_probe: act8846_pmic_sleep=1
act_dcdc1: 1500 mV
[ 3.090760] act_dcdc1: 1500 mV
vccio: 3300 mV
[ 3.096202] vccio: 3300 mV
vdd_logic: 700 <--> 1500 mV at 1100 mV
[ 3.102867] vdd_logic: 700 <--> 1500 mV at 1100 mV
act_dcdc4: 2000 mV
[ 3.109714] act_dcdc4: 2000 mV
vccio_sd: 3300 mV
[ 3.114753] vccio_sd: 3300 mV
act_ldo2: 1000 mV
[ 3.119706] act_ldo2: 1000 mV
act_ldo3: 3300 mV
[ 3.124657] act_ldo3: 3300 mV
act_ldo4: 3300 mV
[ 3.129609] act_ldo4: 3300 mV
act_ldo5: 3300 mV
[ 3.134559] act_ldo5: 3300 mV
act_ldo6: 1000 mV
[ 3.139511] act_ldo6: 1000 mV
vcc_18: 1800 mV
[ 3.144275] vcc_18: 1800 mV
act_ldo8: 1800 mV
[ 3.149131] act_ldo8: 1800 mV
vdd_arm: 712 <--> 1500 mV at 1000 mV
[ 3.159365] vdd_arm: 712 <--> 1500 mV at 1000 mV
vdd_gpu: 712 <--> 1500 mV at 1000 mV
[ 3.169603] vdd_gpu: 712 <--> 1500 mV at 1000 mV
Switching to clocksource arch_sys_counter
[ 3.178861] Switching to clocksource arch_sys_counter
rk-fb rockchip-fb: rk fb ion client create success!
[ 3.249636] rk-fb rockchip-fb: rk fb ion clrient create success!
k-fb rockchip-fb: rockchip framebuffer driver probe
[ 3.260683] rk-fb rockchip-fb: rockchip framebuffer driver probe
rk-screen rk_screen.9: rockchip screen probe success
[ 3.271756] rk-screen rk_screen.9: rockchip screen probe success
rk32-lvds rk32-lvds: rk32 lvds driver probe success
[ 3.282745] rk32-lvds rk32-lvds: rk32 lvds driver probe success
rk32-edp ff970000.edp: screen is not edp!
[ 3.292708] rk32-edp ff970000.edp: screen is not edp!
rk32-edp: probe of ff970000.edp failed with error -22
[ 3.302932] rk32-edp: probe of ff970000.edp failed with error -22
rk3288-lcdc lcdc0: can't find power_ctr node for lcdc0
[ 3.314271] rk3288-lcdc lcdc0: can't find power_ctr node for lcdc0
graphics fb0: rockchip framebuffer registerd:fb0
[ 3.325143] graphics fb0: rockchip framebuffer registerd:fb0
graphics fb1: rockchip framebuffer registerd:fb1
[ 3.335496] graphics fb1: rockchip framebuffer registerd:fb1
graphics fb2: rockchip framebuffer registerd:fb2
[ 3.345847] graphics fb2: rockchip framebuffer registerd:fb2
graphics fb3: rockchip framebuffer registerd:fb3
[ 3.356198] graphics fb3: rockchip framebuffer registerd:fb3
graphics fb4: rockchip framebuffer registerd:fb4
[ 3.366551] graphics fb4: rockchip framebuffer registerd:fb4
rk_iommu ff930300.vopb_mmu: (vopb) Enabled
[ 3.376341] rk_iommu ff930300.vopb_mmu: (vopb) Enabled
rk_iommu ff930300.vopb_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x1d670000
rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60 [ 3.396065] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
k3288-lcdc lcdc0: wakeup from standby!
[ 3.405573] rk3288-lcdc lcdc0: wakeup from standby!
alloc_buffer:ion_phy_addr=0x10000000
[ 3.514327] alloc_buffer:ion_phy_addr=0x10000000
fb0:phy:10000000>>vir:df191000>>len:0x1800000
[ 3.562174] fb0:phy:10000000>>vir:df191000>>len:0x1800000
rk3288-lcdc lcdc0: lcdc0 probe ok, iommu enabled
[ 3.572263] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu enabled
rockchip_set_mux:warning ignore bank num 15
[ 3.582145] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
[ 3.591603] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
[ 3.601055] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
[ 3.610510] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
[ 3.619967] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
[ 3.629421] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
[ 3.638877] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
[ 3.648330] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
[ 3.657790] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
[ 3.667245] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
[ 3.676705] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
[ 3.686157] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
[ 3.695607] rockchip_set_mux:warning ignore bank num 15
rockchip_set_mux:warning ignore bank num 15
[ 3.705065] rockchip_set_mux:warning ignore bank num 15
NET: Registered protocol family 2
[ 3.732367] NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 3.742946] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
CP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 3.755437] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
CP: Hash tables configured (established 4096 bind 4096)
[ 3.767232] TCP: Hash tables configured (established 4096 bind 4096)
CP: reno registered
[ 3.775541] TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 3.783676] UDP hash table entries: 256 (order: 1, 8192 bytes)
DP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 3.794766] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
ET: Registered protocol family 1
[ 3.804221] NET: Registered protocol family 1
Unpacking initramfs...
[ 3.810846] Unpacking initramfs...
Freeing initrd memory: 4864K (c4bf0000 - c50b0000)
[ 3.938383] Freeing initrd memory: 4864K (c4bf0000 - c50b0000)
hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
[ 3.951697] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
robe device ff9a0000.vpu_service
[ 3.963062] probe device ff9a0000.vpu_service
vpu_service: power on
[ 3.969613] vpu_service: power on
checking hw id 4831
[ 3.974938] checking hw id 4831
vpu_service set to auto frequency mode
[ 3.981856] vpu_service set to auto frequency mode
vcodec vpu_service: vcodec ion client create success!
[ 3.991820] vcodec vpu_service: vcodec ion client create success!
vpu_service: power off...[ 4.000249] vpu_service: power off...done
init success
[ 4.004328] done
[ 4.005876] init success
probe device ff9c0000.hevc_service
[ 4.013602] probe device ff9c0000.hevc_service
hevc_service: power on
[ 4.020303] hevc_service: power on
checking hw id 6867
[ 4.025705] checking hw id 6867
vcodec hevc_service: vcodec ion client create success!
[ 4.034128] vcodec hevc_service: vcodec ion client create success!
hevc_service: power off...[ 4.042743] hevc_service: power off...done
init success
[ 4.046893] done
[ 4.048448] init success
rknandbase v1.0 2014-03-31
[ 4.055422] rknandbase v1.0 2014-03-31
rknand_probe clk rate = 148500000
[ 4.062477] rknand_probe clk rate = 148500000
rknand_probe clk rate = 148500000
[ 4.070134] rknand_probe clk rate = 148500000
rknand ff400000.nandc0: can't request region for resource [mem 0xff400000-0xff403fff]
[ 4.082675] rknand ff400000.nandc0: can't request region for resource [mem 0xff400000-0xff403fff]
knand ff400000.nandc0: no reg resource?
[ 4.095374] rknand ff400000.nandc0: no reg resource?
r
knand: probe of ff400000.nandc0 failed with error -1
[ 4.105506] rknand: probe of ff400000.nandc0 failed with error -1
knand_driver:ret = 0
[ 4.113756] rknand_driver:ret = 0
audit: initializing netlink socket (disabled)
[ 4.121592] audit: initializing netlink socket (disabled)
type=2000 audit(2.460:1): initialized
[ 4.130653] type=2000 audit(2.460:1): initialized
bounce pool size: 64 pages
[ 4.137997] bounce pool size: 64 pages
fuse init (API version 7.22)
[ 4.156393] fuse init (API version 7.22)
msgmni has been set to 926
[ 4.162974] msgmni has been set to 926
SELinux: Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 4.183211] Block layer SCSI generic (bsg) driver veirsion 0.4 loaded (major 246)
o scheduler noop registered
[ 4.193421] io scheduler noiop registered
o scheduler deadline registered
[ 4.200550] io scheduler deadline registered
io scheduler cfq registered (default)
[ 4.208480] io scheduler cfq registered (default)
Console: switching to colour frame buffer device 240x67
[ 4.218612] Console: switching to colour frame buffer device 240x67
rga ff920000.rga: rga ion client create success!
[ 4.320422] rga ff920000.rga: rga ion client create success!
rga: Driver loaded succesfully
[ 4.329469] rga: Driver loaded succesfully
IEP Power ON
[ 4.335168] IEP Power ON
iep ion client create success!
[ 4.340916] iep ion client create success!
rk_iommu ff900800.iep_mmu: (iep) Enabled
[ 4.349246] rkr_iommu ff900800.iep_mmu: (iep) Enabled
k_iommu ff900800.iep_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x1d66b000
IEP Power OFF
[ 4r.365509] IEP Power OFF
k_iommu ff900800.iep_mmu: (iep) Disabled
[r 4.372367] rk_iommu ff900800.iep_mmu: (iep) Disabled
k_iommu ff900800.iep_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x1d66b000
[ 4.386846] rk_iommu ff900800.iep_mmu: rockchip_Iiommu_detach_device: Detached IOMMU with pgtable 0x1d66b000
EP Driver loaded succesfully
[ 4.400061] IEP Driver loaded succesfully
Module initialized.
[ 4.406321] Module initialized.
dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
[ 4.415606] ddma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
ma-pl330 ffb20000.pdma: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
[ 4.430337] dma-pl330 ffb20000.pdma: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
[ 4.445017] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
ma-pl330 ff250000.pdma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 4.459857] dma-pl330 ff250000.pdma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
wm-voltage-regulator pwm_regulator.24: unable to request PWM, trying legacy API
[ 4.476419] pwm-voltage-regulator pwm_regulator.24p: unable to request PWM, trying legacy API
wm-voltage-regulator pwm_regulator.24: unable to request legacy PWM
[ 4.491950] pwm-vpoltage-regulator pwm_regulator.24: unable to request legacy PWM
wm_regulator_probe:error
[ 4.502338] pwm_regulator_probe:error
platform pwm_regulator.24: Driver pwm-voltage-regulator requests probe deferral
[ 4.513859] platform pwm_regulator.24: Driver pwm-voltage-regulator requests probe deferral
k_serial.c v1.8 2014-03-04
[ 4.525348] rk_serial.c v1.8 2014-03-04
ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
[ 4.536314] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
erial ff180000.serial: membase 0xdf172000
[ 4.548496] serial ff180000.serial: membase 0xdf172000
loop: module loaded
[ 4.560464] loop: module loaded
SCSI Media Changer driver v0.25
[ 4.567048] SCSI Media Changer driver v0.25
tun: Universal TUN/TAP device driver, 1.6
t[ 4.575669] tun: Universal TUN/TAP device driver, 1.6
un: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 4.586308] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
stmmac_probe_config_dt: Can not read property: pmu_regulator.
[ 4.598789] stmmac_probe_config_dt: Can not read property: pmu_regulator.
tmmac_probe_config_dt: Can not read property: pmu_enable_level.
stmmac_probe_config_dt: clock input or output? (input).
stmmac[ 4.612127] stmmac_probe_config_dt: Can not read property: pmu_enable_level.
_probe_config_dt: TX delay(0x30).
stmma[ 4.617545] stmmac_probe_config_dt: clock input or output? (input).
c_probe_config_dt: RX delay(0x10).
of_g[ 4.628358] stmmac_probe_config_dt: TX delay(0x30).
et_named_gpio_flags exited with status 136
of_g[ 4.638403] stmmac_probe_config_dt: RX delay(0x10).
et_named_gpio_flags: can't parse gpios property
stmmac_probe_config_dt: is rockchip,rk3288-gmacstmmc_pltfr_init:
[ 4.663933] stmmac_probe_config_dt: is rockchip,rk3288-gmac
stmmc_pltfr_init: ERROR: Get power-gpio failed.
[ 4.663946] stmmc_pltfr_init:
[ 4.674473] sstmmc_pltfr_init: ERROR: Get power-gpio failed.
tmmc_pltfr_init: init for RGMII
[ 4.686576] stmmc_pltfr_intit: init for RGMII
x delay=0x30
rx delay=0x10
[ 4.693951] tx delay=0x30
[ 4.693951] rx delay=0x10
stmmac - user ID: 0x10, Synopsys ID: 0x35
[ 4.703576] stmmac - user ID : 0x10, Synopsys ID: 0x35
Normal descriptors
[ 4.729050] Norma l descriptors
Ring mode enabled
[ 4.752308] Ring mode enabled
DMA HW capability register supported[ 4.777024] DMA HW cap ability register supportedRX Checksum Offload Engine supported (type 2)
[ 4.786374] RX Checksum Offload Engine supported (type 2)
TX Checksum insertion supported
Wake-Up On Lan supported
Enable RX Mitigation via HW Watchdog Timer
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module [ 4.831891] TX Checksum insertion supported
registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
CSLIP: code copyright 198[ 4.834457] Wake-Up On Lan supported
9 Regents of the University of California.
Rockchip WiFi SYS interface (V1.00) ...
usbcore: registered new interface driver catc
usbcore: registered new interface driver kaweth
pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethe[ 4.838833] Enable RX Mitigation via HW Watchdog Timer
rnet driver
usbcore: registered new interface driver pegasus
usbcore: registered new interface driver rtl8150
usbcore: registered new interface driver r8152
hso: drivers/net/usb/hso.c: Option Wireless
[ 4.843383] PPP generic driver version 2.4.2
usbcore: registered new interface driver hso
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc[ 4.847704] PPP BSD Compression module registered
_ether
usbcore: registered new interface driver cdc_eem
usbcore: registered new interface driver dm9601
usbcore: registered new interface driver dm9620
usbcore: registered new interface driver smsc75[ 4.855942] PPP Deflate Compression module registered
xx
usbcore: registered new interface driver smsc95xx
usbcore: registered new interface driver gl620a
usbcore: registered new interface driver net1080
usbcore: registered new interface driver plus[ 4.859780] PPP MPPE Compression module registered
b
usbcore: registered new interface driver rndis_host
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver [ 4.863184] NET: Registered protocol family 24
MOSCHIP usb-ethernet driver
usbcore: registered new interface driver int51x1
usbcore: registered new interface driver kalmia
usbcore: registered new interface driver ipheth
usbcore: registered new interface driver sierra_net
us[ 4.872298] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
bcore: registered new interface driver cx82310_eth
usbcore: registered new interface driver cdc_ncm
usbcore: registered new interface driver qmi_wwan
usbcore: registered new interface driver cdc_mbim
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Dr[ 4.882404] CSLIP: code copyright 1989 Regents of the University of California.
iver
ehci_rk_probe e0a00000 e0a00010
rockchip_ehci_host ff500000.usb: Rockchip On-Chip EHCI Host Controller
rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bu[ 4.886393] Rockchip WiFi SYS interface (V1.00) ...
s number 1
[ 4.891041] usbcore: registered new interface driver catc
[ 4.895755] usbcore: registered new interface driver kaweth
[ 4.907496] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 4.912341] usbcore: registered new interface driver pegasus
rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
rockchip_ehci_host ff500000.usb: USB 0.0 started, EHCI 1.00
usb usb1: New[ 4.917182] usbcore: registered new interface driver rtl8150
USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: Rockchip On-Chip EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
usb usb1: SerialNumber: ff500[ 4.921801] usbcore: registered new interface driver r8152
000.usb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
[ 4.930251] hso: drivers/net/usb/hso.c: Option Wireless
ehci_rk_probe ok
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems a[ 4.934835] usbcore: registered new interface driver hso
nd ISDN adapters
usbcore: registered new interface driver usblp
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver um[ 4.939418] usbcore: registered new interface driver asix
s-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums_eneub6250
usbcore: registered new interf[ 4.944690] usbcore: registered new interface driver ax88179_178a
ace driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interfa[ 4.954316] usbcore: registered new interface driver cdc_ether
ce driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
usbcore: registered new interfa[ 4.959159] usbcore: registered new interface driver cdc_eem
ce driver usbserial
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver trancevibrator
usb20_otg: version 3[ 4.963865] usbcore: registered new interface driver dm9601
.10a 21-DEC-2012
e0a80040
Core Release: 3.10a
Setting default values for core params
Using Buffer DMA mode
Periodic Transfer Interrupt Enhancement - disabled
Multiprocessor Interrupt Enhan[ 4.968608] usbcore: registered new interface driver dm9620
cement - disabled
OTG VER PARAM: 0, OTG VER FLAG: 0
^^^^^^^^^^^^^^^^^Device Mode
Dedicated Tx FIFOs mode
pcd_init otg_dev = dcd682c0
usb20_otg ff580000.usb: DWC OTG Controller
usb20_otg ff580000.u[ 4.978491] usbcore: registered new interface driver smsc75xx
sb: new USB bus registered, assigned bus number 2
usb20_otg ff580000.usb: irq 55, io mem 0x00000000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
us[ 4.983453] usbcore: registered new interface driver smsc95xx
b usb2: Product: DWC OTG Controller
usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
usb usb2: SerialNumber: ff580000.usb
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usb20_host: ver[ 4.988193] usbcore: registered new interface driver gl620a
sion 3.10a 21-DEC-2012
e0b00040
Core Release: 3.10a
Setting default values for core params
Using Buffer DMA mode
Periodic Transfer Interrupt Enhancement - disabl[ 4.992991] usbcore: registered new interface driver net1080
ed
Multiprocessor Interrupt Enhancement - disabled
OTG VER PARAM: 0, OTG VER FLAG: 0
^^^^^^^^^^^^^^^^^^Host Mode
usb20_host ff540000.usb: DWC OTG Controller
usb20_host ff540000.u[ 5.002325] usbcore: registered new interface driver plusb
sb: new USB bus registered, assigned bus number 3
usb20_host ff540000.usb: irq 57, io mem 0x00000000
Init: Power Port (0)
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3[ 5.007444] usbcore: registered new interface driver rndis_host
, Product=2, SerialNumber=1
usb usb3: Product: DWC OTG Controller
usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
usb usb3: SerialNumber: ff540000.usb
hub 3-0:1.0: USB hub found
hub 3-0[ 5.012537] usbcore: registered new interface driver cdc_subset
:1.0: 1 port detected
++++++++remotectl_init
Re: Linux on XORO MegaPad gives a lot of errors
Code: Select all
++++++++remotectl driver V1.0 for linux 3.10
of_get_named_gpio_flags exited with status 257
remotectl probe j=0x0
remotectl pr[ 5.017279] usbcore: registered new interface driver zaurus
obe j=0x1
remotectl probe j=0x2
remotectl probe j=0x3
remotectl probe j=0x4
remotectl probe j=0x5
input: rkxx-remotectl as /devices/rkxx-remotectl.30/input/input0
[ 5.028312] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
. rk pwm remotectl v1.0 init
remotectl probe j=0x0
remotectl probe j=0x1
input: ff68[ 5.033245] usbcore: registered new interface driver int51x1
0000.pwm as /devices/ff680000.pwm/input/input1
pwm enable val=0x646205
usbcore: registered new interface driver xpad
usbcore: registered new interface driver usb_acecad
usbcore: registered new [ 5.038000] usbcore: registered new interface driver kalmia
interface driver aiptek
usbcore: registered new interface driver gtco
usbcore: registered new interface driver hanwang
usbcore: registered new interface driver kbtab
usbcore: regist[ 5.042707] usbcore: registered new interface driver ipheth
ered new interface driver wacom
sensor_register_slave:mma8452,id=17
sensor_register_slave:cm3217,id=44
sensor_register_slave:cm3218,id=45
of[ 5.047840] usbcore: registered new interface driver sierra_net
_get_named_gpio_flags exited with status 4
rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
i2c /dev entries driver
IR NEC protocol han[ 5.062499] usbcore: registered new interface driver cx82310_eth
dler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR R[ 5.067373] usbcore: registered new interface driver cdc_ncm
C5 (streamzap) protocol handler initialized
IR SANYO protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
usbcore: registered new interface driver uvcvideo
USB Video[ 5.072271] usbcore: registered new interface driver qmi_wwan
Class driver (1.1.1)
CamSys driver version: v0.19.0, CamSys head file version: v0.8.0
D1:camsys_mipiphy_probe_cb(163): ff910000.isp mipi [ 5.077203] usbcore: registered new interface driver cdc_mbim
phy0 probe success(reg_phy: 0x0 reg_vir: 0x0 size: 0x0)
D1:camsys_mipiphy_probe_cb(160): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000 reg_vir: 0xe09d8000 size: 0x4000)
[ 5.090017] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1:camsys_platform_probe(1156): ff910000.isp memory:
D1:camsys_platform_probe(11[ 5.096366] ehci_rk_probe e0a00000 e0a00010
66): Register memory (phy: 0xff910000 vir: 0xe09e0000 size: 0x10000)
D1:camsys_platform_probe(1161): I2c memory (phy: 0x1ce14000 vir: 0xdce14000 size: 0x1000)
D1:camsys_platform_probe(1181): Probe ff910000.isp devic[ 5.103158] rockchip_ehci_host ff500000.usb: Rockchip On-Chip EHCI Host Controller
e success
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redh[ 5.115642] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
at.com
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCILL protocol initialized
[ 5.205098] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
[ 5.211905] rockchip_ehci_host ff500000.usb: USB 0.0 started, EHCI 1.00
[ 5.223571] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.230028] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.235528] usb usb1: Product: Rockchip On-Chip EHCI Host Controller
[ 5.239967] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
[ 5.248957] usb usb1: SerialNumber: ff500000.usb
[ 5.252961] hub 1-0:1.0: USB hub found
[ 5.255844] hub 1-0:1.0: 1 port detected
[ 5.276736] ehci_rk_probe ok
[ 5.281838] usbcore: registered new interface driver cdc_acm
[ 5.294288] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 5.298999] usbcore: registered new interface driver usblp
[ 5.303869] usbcore: registered new interface driver cdc_wdm
[ 5.309120] usbcore: registered new interface driver usb-storage
[ 5.319531] usbcore: registered new interface driver ums-alauda
[ 5.324750] usbcore: registered new interface driver ums-cypress
[ 5.329966] usbcore: registered new interface driver ums-datafab
[ 5.335325] usbcore: registered new interface driver ums_eneub6250
[ 5.346504] usbcore: registered new interface driver ums-freecom
[ 5.351754] usbcore: registered new interface driver ums-isd200
[ 5.357026] usbcore: registered new interface driver ums-jumpshot
[ 5.362071] usbcore: registered new interface driver ums-karma
[ 5.373055] usbcore: registered new interface driver ums-onetouch
[ 5.378204] usbcore: registered new interface driver ums-sddr09
[ 5.383333] usbcore: registered new interface driver ums-sddr55
[ 5.388357] usbcore: registered new interface driver ums-usbat
[ 5.399035] usbcore: registered new interface driver usbserial
[ 5.404822] usbcore: registered new interface driver usbserial_generic
[ 5.410014] usbserial: USB Serial support registered for generic
[ 5.415516] usbcore: registered new interface driver trancevibrator
[ 5.424595] usb20_otg: version 3.10a 21-DEC-2012
[ 5.426572] e0a80040
[ 5.428569] Core Release: 3.10a
[ 5.432344] Setting default values for core params
[ 5.434972] Using Buffer DMA mode
[ 5.439875] Periodic Transfer Interrupt Enhancement - disabled
[ 5.449950] Multiprocessor Interrupt Enhancement - disabled
[ 5.453295] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 5.456157] ^^^^^^^^^^^^^^^^^Device Mode
[ 5.458531] Dedicated Tx FIFOs mode
[ 5.461292] pcd_init otg_dev = dcd682c0
[ 5.465865] usb20_otg ff580000.usb: DWC OTG Controller
[ 5.478270] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
[ 5.483168] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
[ 5.489286] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.495702] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.505052] usb usb2: Product: DWC OTG Controller
[ 5.509800] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[ 5.513394] usb usb2: SerialNumber: ff580000.usb
[ 5.517317] hub 2-0:1.0: USB hub found
[ 5.520186] hub 2-0:1.0: 1 port detected
[ 5.530237] usb20_host: version 3.10a 21-DEC-2012
[ 5.534702] e0b00040
[ 5.536700] Core Release: 3.10a
[ 5.540476] Setting default values for core params
[ 5.543063] Using Buffer DMA mode
[ 5.553510] Periodic Transfer Interrupt Enhancement - disabled
[ 5.558198] Multiprocessor Interrupt Enhancement - disabled
cpufreq version 1.0, suspend freq 1200 MHz
cpuidle: using governor ladder
cpuidle: using governor[ 5.561506] OTG VER PARAM: 0, OTG VER FLAG: 0
menu
Synopsys Designware Multimedia Card Interface Driver
dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
[ 5.564322] ^^^^^^^^^^^^^^^^^^Host Mode
[ 5.568648] usb20_host ff540000.usb: DWC OTG Controller
dwmmc_r[ 5.580846] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
ockchip ff0f0000.rksdmmc: Using internal DMA controller.
3291..dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
m[ 5.585852] usb20_host ff540000.usb: irq 57, io mem 0x00000000
mc0 : Rockchip specific MHSC: Ver 1.13 2014-09-05
of_get_named_gpio_flags: can't parse gpios property
1381..dw[ 5.588060] Init: Power Port (0)
_mci_set_ios: no card. [mmc0]
[ 5.594154] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.606411] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.610204] usb usb3: Product: DWC OTG Controller
[ 5.614958] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
381..dw_mci_set_ios: no card. [mmc0]
rk_sdmmc: BOOT dw_mci_setup_b[ 5.618551] usb usb3: SerialNumber: ff540000.usb
us: argue clk_mmc workaround out 800000Hz for init[mmc0]
dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
dwmmc_rockchip ff0f0000.rksdmmc: 1 slots[ 5.622598] hub 3-0:1.0: USB hub found
initialized
dwmmc_rockchip ff0c0000.rksdmmc: Versio[ 5.631280] hub 3-0:1.0: 1 port detected
n ID is 270a
[ 5.634788] ++++++++remotectl_init
[ 5.639563] ++++++++remotectl driver V1.0 for linux 3.10
dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
3285..dw_mci_init_slot: fmin=300000, fm[ 5.646701] remotectl probe j=0x0
[ 5.654342] remotectl probe j=0x1
ax=50000000 [mmc1]
mmc1 : Rockchip specific MHSC: Ver 1.13 [ 5.656564] remotectl probe j=0x2
2014-09-05
of_get_named_gpio_flags: can't parse g[ 5.658742] remotectl probe j=0x3
pios property
1381..dw_mci_set_ios:[ 5.660949] remotectl probe j=0x4
no card. [mmc1]
[ 5.663126] remotectl probe j=0x5
1381..dw_[ 5.669832] input: rkxx-remotectl as /devices/rkxx-remotectl.30/input/input0
[ 5.680702] .. rk pwm remotectl v1.0 init
mci_set_ios: no card. [mmc1]
[ 5.683151] remotectl probe j=0x0
[ 5.685336] remotectl probe j=0x1
[ 5.696902] input: ff680000.pwm as /devices/ff680000.pwm/input/input1
[ 5.699920] pwm enable val=0x646205
[ 5.705212] usbcore: registered new interface driver xpad
mc0: BKOPS_EN bit is not set
mmc_host mmc0[ 5.710348] usbcore: registered new interface driver usb_acecad
: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
rk_sdmmc: BOOT dw_mci_setup_bus: ar[ 5.720598] usbcore: registered new interface driver aiptek
gue clk_mmc workaround out normal clock [mmc0]
dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
rk_sdmmc: BOOT Bus speed=50000000H[ 5.725185] usbcore: registered new interface driver gtco
z,Bus width=8bits.[mmc0]
dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
mmc0: new high speed MMC card at add[ 5.730012] usbcore: registered new interface driver hanwang
ress 0001
dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
mmcblk0: mmc0:0001 NCard 14.4 GiB
[ 5.734687] usbcore: registered new interface driver kbtab
boot: 0x002c00000 -- 0x004c[ 5.744803] usbcore: registered new interface driver wacom
00000 (32 MB)
linuxroot: 0x132800000 -- 0x39cc00[ 5.749495] sensor_register_slave:mma8452,id=17
000 (9892 MB)
dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
mmcblk0: p1 p23291..dw_mci_init_slo[ 5.752943] sensor_register_slave:cm3217,id=44
t: fmin=200000, fmax=50000000 [mmc2]
1381..dw_mci_set_ios: no card. [mmc1]
mmc2 : Rockchip specific MHSC: Ver[ 5.756343] sensor_register_slave:cm3218,id=45
1.13 2014-09-05
of_get_named_gpio_flags: can't par[ 5.778765] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
se gpios property
1381..dw_mci_set_ios: no card. [[ 5.781338] i2c /dev entries driver
mmc2]
[ 5.792867] IR NEC protocol handler initialized
[ 5.796688] IR RC5(x) protocol handler initialized
[ 5.800205] IR RC6 protocol handler initialized
[ 5.803695] IR JVC protocol handler initialized
[ 5.807277] IR Sony protocol handler initialized
381..dw_mci_set_ios: no card. [mmc2]
[ 5.817460] IR RC5 (streamzap) protocol handler initialized
1381..dw_mci_set_ios: no card. [mmc2]
dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
dwmmc_rockchip ff0d0000.rksdmmc: [ 5.821161] IR SANYO protocol handler initialized
[ 5.826058] IR MCE Keyboard/mouse protocol handler initialized
1 slots initialized
leds-gpio gpio-leds.23: pins ar[ 5.831293] usbcore: registered new interface driver uvcvideo
e not configured from the driver
of_get_named_gpio_flags exited wi[ 5.839945] USB Video Class driver (1.1.1)
th status 239
of_get_named_gpio_flags exited wit[ 5.846296] CamSys driver version: v0.19.0, CamSys head file version: v0.8.0
h status 11
of_get_named_gpio_flags exited with [ 5.865509] D1:camsys_mipiphy_probe_cb(163): ff910000.isp mipi phy0 probe success(reg_phy: 0x0 reg_vir: 0x0 size: 0x0)
status 239
of_get_named_gpio_flags exited with [ 5.877900] D1:camsys_mipiphy_probe_cb(160): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000 reg_vir: 0xe09d8000 size: 0x4000)
status 11
hidraw: raw HID events driver (C) J[ 5.891203] D1:camsys_platform_probe(1156): ff910000.isp memory:
iri Kosina
usbcore: registered new i[ 5.904874] D1:camsys_platform_probe(1166): Register memory (phy: 0xff910000 vir: 0xe09e0000 size: 0x10000)
nterface driver usbhid
usbhid: USB HID core driver
ashme[ 5.913862] D1:camsys_platform_probe(1161): I2c memory (phy: 0x1ce14000 vir: 0xdce14000 size: 0x1000)
m: initialized
logger: created 256K log 'log_main'
[ 5.927687] D1:camsys_platform_probe(1181): Probe ff910000.isp device success
logger: created 256K log 'log_events[ 5.934175] device-mapper: uevent: version 1.0.3
'
logger: created 256K log 'log_radio'
[ 5.950766] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
logger: created 256K log 'log_system'[ 5.955102] Bluetooth: HCI UART driver ver 2.2
of_get_named_gpio_flags exited w[ 5.958932] Bluetooth: HCI H4 protocol initialized
ith status 5
of_get_named_gpio_flags exited with s[ 5.962613] Bluetooth: HCILL protocol initialized
tatus 5
input: rk29-keypad as /devices/ff100[ 6.757883] cpufreq version 1.0, suspend freq 1200 MHz
000.adc/key.32/input/input2
of_get_named_gpio_flags exited wi[ 6.761460] cpuidle: using governor ladder
th status 256
of_get_named_gpio_flags exited with s[ 6.768608] cpuidle: using governor menu
tatus 231
i2c-core: driver [ES8323] using l[ 6.773781] Synopsys Designware Multimedia Card Interface Driver
egacy suspend method
i2c-core: driver [ES8323] using legac[ 6.779555] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
y resume method
rockchip-hdmi-spdif rockchip-hdmi-[ 6.808193] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
spdif.28: ASoC: CPU DAI (null) not registered
rockchip_hdmi_spdif_audio_probe() reg[ 6.813785] 3291..dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
ister card failed:-517
platform rockchip-hdmi-spdif.28: Driv[ 6.824092] mmc0 : Rockchip specific MHSC: Ver 1.13 2014-09-05
er rockchip-hdmi-spdif requests probe deferral
es8323_probe:register ISR (irq=195)[ 6.835682] 1381..dw_mci_set_ios: no card. [mmc0]
[ 6.867947] 1381..dw_mci_set_ios: no card. [mmc0]
[ 6.881083] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
[ 6.889807] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
[ 6.898263] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
[ 6.906931] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
[ 6.924827] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
[ 6.936558] 3285..dw_mci_init_slot: fmin=300000, fmax=50000000 [mmc1]
[ 6.944305] mmc1 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[ 6.959982] 1381..dw_mci_set_ios: no card. [mmc1]
[ 6.981698] 1381..dw_mci_set_ios: no card. [mmc1]
[ 7.011102] mmc0: BKOPS_EN bit is not set
[ 7.027097] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[ 7.039674] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[ 7.048301] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
[ 7.058721] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=8bits.[mmc0]
[ 7.063339] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
[ 7.072906] mmc0: new high speed MMC card at address 0001
[ 7.077440] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
[ 7.085991] mmcblk0: mmc0:0001 NCard 14.4 GiB
[ 7.095798] boot: 0x002c00000 -- 0x004c00000 (32 MB)
[ 7.104527] linuxroot: 0x132800000 -- 0x39cc00000 (9892 MB)
[ 7.110082] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
[ 7.120766] 3291..dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
[ 7.124190] mmcblk0: p1 p21381..dw_mci_set_ios: no card. [mmc1]
[ 7.132988] mmc2 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[ 7.150671] 1381..dw_mci_set_ios: no card. [mmc2]
[ 7.180665] 1381..dw_mci_set_ios: no card. [mmc2]
[ 7.192335] 1381..dw_mci_set_ios: no card. [mmc2]
[ 7.200962] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
[ 7.215906] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
[ 7.227338] leds-gpio gpio-leds.23: pins are not configured from the driver
[ 7.287473] hidraw: raw HID events driver (C) Jiri Kosina
[ 7.302660] usbcore: registered new interface driver usbhid
[ 7.305153] usbhid: USB HID core driver
[ 7.316602] ashmem: initialized
[ 7.326948] logger: created 256K log 'log_main'
[ 7.334884] logger: created 256K log 'log_events'
[ 7.346479] logger: created 256K log 'log_radio'
[ 7.354253] logger: created 256K log 'log_system'
[ 7.383011] input: rk29-keypad as /devices/ff100000.adc/key.32/input/input2
[ 7.410717] i2c-core: driver [ES8323] using legacy suspend method
[ 7.421151] i2c-core: driver [ES8323] using legacy resume method
[ 7.435248] rockchip-hdmi-spdif rockchip-hdmi-spdif.28: ASoC: CPU DAI (null) not registered
[ 7.446894] rockchip_hdmi_spdif_audio_probe() register card failed:-517
[ 7.459883] platform rockchip-hdmi-spdif.28: Driver rockchip-hdmi-spdif requests probe deferral
[ 7.468056] es8323_probe:register ISR (irq=195)
S8323 2-0010: ASoC: no dapm match for LINPUT1 --> NULL --> Left Line Mux
[ 7.756380] ES8323 2-0010: ASoC: nEo dapm match for LINPUT1 --> NULL --> Left Line Mux
S8323 2-0010: ASoC: Failed to add route LINPUT1 -> NULL -> Left Line Mux
[ 7.774376] ES8323 2-0010: ASoC: Failed to add routEe LINPUT1 -> NULL -> Left Line Mux
S8323 2-0010: ASoC: no dapm match for LINPUT2 --> NULL --> Left Line Mux
[ 7.792342] ES8323 2-0010: ASoC: no dapm matcEh for LINPUT2 --> NULL --> Left Line Mux
S8323 2-0010: ASoC: Failed to add route LINPUT2 -> NULL -> Left Line Mux
[ 7.810251] ES8323 2-E0010: ASoC: Failed to add route LINPUT2 -> NULL -> Left Line Mux
S8323 2-0010: ASoC: no dapm match for Left PGA Mux --> NULL --> Left Line Mux
[ 7.828513] ES8323 2-00E10: ASoC: no dapm match for Left PGA Mux --> NULL --> Left Line Mux
S8323 2-0010: ASoC: Failed to add route Left PGA Mux -> NULL -> Left Line Mux
ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> NULL --> Right Line Mux
ES8323 2-0010: ASoC: Failed to add route RINP[ 7.847255] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> NULL -> Left Line Mux
UT1 -> NULL -> Right Line Mux
ES8323 2-0010: ASoC: no dapm match for RINPU[ 7.853757] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> NULL --> Right Line Mux
T2 --> NULL --> Right Line Mux
ES8323 2-0010: ASoC: Failed to add route RI[ 7.868357] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> NULL -> Right Line Mux
NPUT2 -> NULL -> Right Line Mux
ES8323 2-0010: ASoC: no dapm match for Righ[ 7.882617] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> NULL --> Right Line Mux
t PGA Mux --> NULL --> Right Line Mux
ES8323 2-0010: ASoC: Failed to add route Ri[ 7.896878] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> NULL -> Right Line Mux
ght PGA Mux -> NULL -> Right Line Mux
ES8323 2-0010: ASoC: no dapm match for LINP[ 7.911658] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> NULL --> Right Line Mux
UT1 --> LAMP --> Left PGA Mux
ES8323 2-0010: ASoC: Failed to add route LIN[ 7.926439] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> NULL -> Right Line Mux
PUT1 -> LAMP -> Left PGA Mux
ES8323 2-0010: ASoC: no dapm match for LINPU[ 7.941043] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left PGA Mux
T2 --> LAMP --> Left PGA Mux
ES8323 2-0010: ASoC: Failed to add route LIN[ 7.955646] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left PGA Mux
PUT2 -> LAMP -> Left PGA Mux
ES8323 2-0010: ASoC: no dapm match for Diffe[ 7.969567] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left PGA Mux
rential Mux --> LAMP --> Left PGA Mux
ES8323 2-0010: ASoC: Failed to add route Di[ 7.983485] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left PGA Mux
fferential Mux -> LAMP -> Left PGA Mux
ES8323 2-0010: ASoC: no dapm match for RINPU[ 7.998172] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> LAMP --> Left PGA Mux
T1 --> RAMP --> Right PGA Mux
ES8323 2-0010: ASoC: Failed to add route RI[ 8.012858] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> LAMP -> Left PGA Mux
NPUT1 -> RAMP -> Right PGA Mux
ES8323 2-0010: ASoC: no dapm match for RINP[ 8.027637] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right PGA Mux
UT2 --> RAMP --> Right PGA Mux
ES8323 2-0010: ASoC: Failed to add route RI[ 8.042417] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right PGA Mux
NPUT2 -> RAMP -> Right PGA Mux
ES8323 2-0010: ASoC: no dapm match for Diff[ 8.056509] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right PGA Mux
erential Mux --> RAMP --> Right PGA Mux
ES8323 2-0010: ASoC: Failed to add route D[ 8.070598] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right PGA Mux
ifferential Mux -> RAMP -> Right PGA Mux
ES8323 2-0010: ASoC: no dapm match for LIN[ 8.085456] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> RAMP --> Right PGA Mux
PUT1 --> LAMP --> Differential Mux
ES8323 2-0010: ASoC: Failed to add route L[ 8.100312] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> RAMP -> Right PGA Mux
INPUT1 -> LAMP -> Differential Mux
ES8323 2-0010: ASoC: no dapm match for RINP[ 8.115427] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Differential Mux
UT1 --> RAMP --> Differential Mux
ES8323 2-0010: ASoC: Failed to add route RI[ 8.130538] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Differential Mux
NPUT1 -> RAMP -> Differential Mux
ES8323 2-0010: ASoC: no dapm match for LINP[ 8.145148] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Differential Mux
UT2 --> LAMP --> Differential Mux
ES8323 2-0010: ASoC: Failed to add route L[ 8.159758] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Differential Mux
INPUT2 -> LAMP -> Differential Mux
ES8323 2-0010: ASoC: no dapm match for RIN[ 8.174361] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Differential Mux
PUT2 --> RAMP --> Differential Mux
ES8323 2-0010: ASoC: Failed to add route R[ 8.188961] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Differential Mux
INPUT2 -> RAMP -> Differential Mux
ES8323 2-0010: ASoC: no dapm match for LIN[ 8.203566] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Differential Mux
PUT1 --> LAMP --> Left Line Mux
ES8323 2-0010: ASoC: Failed to add route [ 8.218166] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Differential Mux
LINPUT1 -> LAMP -> Left Line Mux
ES8323 2-0010: ASoC: no dapm match for L[ 8.232522] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left Line Mux
INPUT2 --> LAMP --> Left Line Mux
ES8323 2-0010: ASoC: Failed to add rout[ 8.246867] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left Line Mux
e LINPUT2 -> LAMP -> Left Line Mux
ES8323 2-0010: ASoC: no dapm match for [ 8.260965] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left Line Mux
Left PGA Mux --> LAMP --> Left Line Mux
iep dpi mode inactivity
ES8323 2-0010: ASoC: Failed to add rout[ 8.275062] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left Line Mux
e Left PGA Mux -> LAMP -> Left Line Mux
ES8323 2-0010: ASoC: no dapm match for [ 8.289580] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> LAMP --> Left Line Mux
RINPUT1 --> RAMP --> Right Line Mux
ES8323 2-0010: ASoC: Failed to add rou[ 8.291724] iep dpi mode inactivity
te RINPUT1 -> RAMP -> Right Line Mux
ES8323 2-0010: ASoC: no dapm match for R[ 8.306236] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> LAMP -> Left Line Mux
INPUT2 --> RAMP --> Right Line Mux
ES8323 2-0010: ASoC: Failed to add rout[ 8.320838] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right Line Mux
e RINPUT2 -> RAMP -> Right Line Mux
ES8323 2-0010: ASoC: no dapm match for [ 8.330747] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right Line Mux
Right PGA Mux --> RAMP --> Right Line Mux
ES8323 2-0010: ASoC: Failed to add rou[ 8.345348] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right Line Mux
te Right PGA Mux -> RAMP -> Right Line Mux
ES8323 2-0010: ASoC: mux Right Line M[ 8.359607] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right Line Mux
ux has no paths
ES8323 2-0010: ASoC: mux Left Line Mux[ 8.374385] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> RAMP --> Right Line Mux
has no paths
ES8323 2-0010: ASoC: mux Right PGA Mux[ 8.389165] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> RAMP -> Right Line Mux
has no paths
ES8323 2-0010: ASoC: mux Left PGA Mux [ 8.401713] ES8323 2-0010: ASoC: mux Right Line Mux has no paths
has no paths
ES8323 2-0010: ASoC: mux Differential [ 8.414529] ES8323 2-0010: ASoC: mux Left Line Mux has no paths
Mux has no paths
Enter::rk[ 8.427344] ES8323 2-0010: ASoC: mux Right PGA Mux has no paths
29_es8323_init----123
[ 8.437685] ES8323 2-0010: ASoC: mux Left PGA Mux has no paths
[ 8.448292] ES8323 2-0010: ASoC: mux Differential Mux has no paths
[ 8.459394] Enter::rk29_es8323_init----123
ockchip-es8323 rockchip-es8323.29: ES8323 HiFi <-> rockchip-i2s.0 mapping ok
[ 8.486718] rockchip-es8323 rockchip-es8323.29: ES8323 HiFi <-> rockchip-i2s.0 mapping ok
32 classifier
[ 8.499302] u32 classifier
Actions configured
[ 8.507134] Actions configured
Netfilter messages via NETLINK v0.30.
[ 8.516920] Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 8.529343] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
tnetlink v0.93: registering with nfnetlink.
[ 8.542346] ctnetlink v0.93: registering with nfnetlink.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 8.556353] NF_TPROXY: Transparent proxy supportN initialized, version 4.1.0
F_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 8.570915] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
t_time: kernel timezone is -0000
[ 8.582825] xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.594309] ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
[ 8.606071] arp_tables: (C) 2002 David S. Miller
TCP: cubic registered
Initializing XFRM netlink socket
NET[ 8.615900] TCP: cubic registered
: Registered protocol family 10
mip6: Mobile IPv6
ip6_tables: (C) [ 8.618828] Initializing XFRM netlink socket
2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
[ 8.625337] NET: Registered protocol family 10
NET: Registered protocol family 17
[ 8.627449] mip6: Mobile IPv6
NET: Registered protocol family 15
B[ 8.635668] ip6_tables: (C) 2000-2006 Netfilter Core Team
ridge firewalling registered
Ebtables v2.0 registered
Bluetooth:[ 8.643383] sit: IPv6 over IPv4 tunneling driver
RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initial[ 8.649727] NET: Registered protocol family 17
ized
Bluetooth: RFCOMM ver 1.11
Bluetooth[ 8.652826] NET: Registered protocol family 15
: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol mul[ 8.660883] Bridge firewalling registered
ticast
Bluetooth: BNEP socket layer initiali[ 8.663124] Ebtables v2.0 registered
zed
Bluetooth: HIDP (Human Interface Emul[ 8.671356] Bluetooth: RFCOMM TTY layer initialized
ation) ver 1.2
Bluetooth: HIDP socket layer initiali[ 8.679494] Bluetooth: RFCOMM socket layer initialized
zed
l2tp_core: L2TP core driver, V2.0
l2[ 8.681895] Bluetooth: RFCOMM ver 1.11
tp_ppp: PPPoL2TP kernel driver, V2.0
[WLAN_RFKILL]: Enter rfkill_wlan_init[ 8.690186] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[WLAN_RFKILL]: Enter rfkill_wlan_pr[ 8.697962] Bluetooth: BNEP filters: protocol multicast
obe
wlan_platdata_parse_dt: wifi_chip_typ[ 8.705057] Bluetooth: BNEP socket layer initialized
e = bcmwifi
[WLAN_RFKILL]: wlan_platdata_parse_d[ 8.714368] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
t: enable wifi power control.
[WLAN_RFKILL]: wlan_platdata_parse_dt[ 8.722999] Bluetooth: HIDP socket layer initialized
: disable wifi io reference voltage control.
[WLAN_RFKILL]: wlan_platdata_parse_d[ 8.726024] l2tp_core: L2TP core driver, V2.0
t: wifi power controled by gpio.
of_get_named_gpio_flags exited with s[ 8.733121] l2tp_ppp: PPPoL2TP kernel driver, V2.0
tatus 156
[WLAN_RFKILL]: wlan_platdata_parse_dt[ 8.741666] [WLAN_RFKILL]: Enter rfkill_wlan_init
: get property: WIFI,poweren_gpio = 156, flags = 0.
of_get_named_gpio_flags: can't parse[ 8.750476] [WLAN_RFKILL]: Enter rfkill_wlan_probe
gpios property
of_get_named_gpio_flags exited with [ 8.759622] wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
status 158
[WLAN_RFKILL]: wlan_platdata_parse_d[ 8.771152] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
t: get property: WIFI,host_wake_irq = 158, flags = 0.
[WLAN_RFKILL]: rfkill_wlan_probe: in[ 8.783111] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
it gpio
[WLAN_RFKILL]: rockchip_wifi_voltage_[ 8.793361] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
select: wifi & sdio reference voltage: 1.8V
[WLAN_RFKILL]: Exit rfkill_wlan_probe[ 8.814465] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
[BT_RFKILL]: Enter rfkill_rk_init
[ 8.848113] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
[ 8.860323] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
f_get_named_gpio_flags exited with status 147
[BT_RFKILL]: bluetooth_platdata_parse[ 8.874601] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
_dt: get property: uart_rts_gpios = 147.
of_get_named_gpio_flags exited with s[ 8.886936] [WLAN_RFKILL]: Exit rfkill_wlan_probe
tatus 155
[BT_RFKILL]: bluetooth_platdata_parse[ 8.889978] [BT_RFKILL]: Enter rfkill_rk_init
_dt: get property: BT,power_gpio = 155.
of_get_named_gpio_flags exited with status 157
[BT_RFKILL]: bluetooth_platdata_parse_[ 8.923259] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
dt: get property: BT,reset_gpio = 157.
of_get_named_gpio_flags exited with status 154
[BT_RFKILL]: bluetooth_platdata_parse_[ 8.942910] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 155.
dt: get property: BT,wake_gpio = 154.
of_get_named_gpio_flags exited with status 159
[BT_RFKILL]: bluetooth_platdata_parse_[ 8.961702] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
dt: get property: BT,wake_host_irq = 159.
[BT_RFKILL]: Request irq for bt wakeu[ 8.980323] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
p host
[BT_RFKILL]: ** disable irq
[BT_RFK[ 8.999284] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
ILL]: ap6335 device registered.
rk3288-hdmi ff980000.hdmi: rk3288[ 9.011026] [BT_RFKILL]: Request irq for bt wakeup host
hdmi probe sucess.
V[ 9.013625] [BT_RFKILL]: ** disable irq
FP support v0.3: implementor 41 architecture 3 part 30 [ 9.025307] [BT_RFKILL]: ap6335 device registered.
variant d rev 0
rk3288_init_suspend
rk3288_suspend_in[ 9.035797] rk3288-hdmi ff980000.hdmi: rk3288 hdmi probe sucess.
it enter
rk3288_suspend_init: pm_ctrbits =4001[ 9.053734] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
7
gpio_get_dts_info suspend:4
gpio_get[ 9.055544] rk3288_init_suspend
_dts_info resume:4
rockchip,pmic-suspend_gpios:14007a10 [ 9.063745] rk3288_suspend_init enter
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0[ 9.074812] rk3288_suspend_init: pm_ctrbits =40017
0
rockchip,pmic-resume_gpios:2007a[ 9.077333] gpio_get_dts_info suspend:4
11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0[ 9.082804] gpio_get_dts_info resume:4
0
clks_gating_suspend_init:clkgt i[ 9.097874] rockchip,pmic-suspend_gpios:14007a10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
nfo ok
Registering SWP/SWPB emulation handl[ 9.111889] rockchip,pmic-resume_gpios:2007a11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
er
ddrfreq: verion 1.2 20140526
ddrf[ 9.123257] clks_gating_suspend_init:clkgt info ok
req: normal 456MHz video_1080p 0MHz video_4k 456MHz dualview 0MHz idle 0MHz suspend 200MHz reboot 456MHz
ddrfreq: auto-freq=0
ddrfreq: auto-[ 9.134461] Registering SWP/SWPB emulation handler
freq-table[0] 240MHz
ddrfreq: auto-freq-table[1] 324MHz
d[ 9.137483] ddrfreq: verion 1.2 20140526
drfreq: auto-freq-table[2] 456MHz
ddrfreq: auto-freq-table[3] 528MHz
[ d 9.151572] ddrfreq: normal 456MHz video_1080p 0MHz video_4k 456MHz dualview 0MHz idle 0MHz suspend 200MHz reboot 456MHz
[ 9.153494] ddrfreq: auto-freq=0
drfreq: change freq to 456 MHz when normal
regulator-dummy: disabling
rockchip-hdmi-spdif rockch[ 9.161275] ddrfreq: auto-freq-table[0] 240MHz
ip-hdmi-spdif.28: ASoC: CPU DAI (null) not registered
rockchip_hdmi_spdif_audio_pr[ 9.164378] ddrfreq: auto-freq-table[1] 324MHz
obe() register card failed:-517
platform rockchip-hdmi-spdif[ 9.171328] ddrfreq: auto-freq-table[2] 456MHz
.28: Driver rockchip-hdmi-spdif requests probe deferral
pcd_pullup, is_on 0
file [ 9.174411] ddrfreq: auto-freq-table[3] 528MHz
system registered
android_usb gadget: M[ 9.194892] regulator-dummy: disabling
ass Storage Function, version: 2009/09/11
android_usb gadget: Number o[ 9.206471] rockchip-hdmi-spdif rockchip-hdmi-spdif.28: ASoC: CPU DAI (null) not registered
f LUNs=2
lun0: LUN: removable file: [ 9.216062] rockchip_hdmi_spdif_audio_probe() register card failed:-517
(no medium)
lun1: LUN: removable file: ([ 9.227693] platform rockchip-hdmi-spdif.28: Driver rockchip-hdmi-spdif requests probe deferral
no medium)
android_usb gadget: android[ 9.229585] pcd_pullup, is_on 0
_usb ready
sensor_init: Probe name sen[ 9.236021] file system registered
sors
sensor-dev.c v1.4 add angle [ 9.245723] android_usb gadget: Mass Storage Function, version: 2009/09/11
calculation support between two gsensors 2013-09-01
[ 9.257173] anrdroid_usb gadget: Number of LUNs=2
tc_hym8563 0-0051: setting system clock to 2021-06-01 14:37:23 UTC (1622558243)
[ 9.267180] lun0: LUN: removable file: (no medium)
[ 9.279222] lun1: LUN: removable file: (no medium)
[ 9.285761] android_usb gadget: android_usb ready
[ 9.291983] sensor_init: Probe name sensors
sbcore: registered new interface driver snd-usb-audio
ALSA device list:
#0: RK_[ 9.305655] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
ES8323
[ 9.319568] rtc_hym8563 0-0051: setting system clock to 2021-06-01 14:37:23 UTC (1622558243)
ockchip-hdmi-spdif rockchip-hdmi-spdif.28: rk-hdmi-spdif-hifi <-> rockchip-spdif mapping ok
[ 9.345096] usbcore: registered new interface driver snd-usb-audio
[ 9.346781] ALSA device list:
[ 9.356429] #0: RK_ES8323
[ 9.375191] rockchip-hdmi-spdif rockchip-hdmi-spdif.28: rk-hdmi-spdif-hifi <-> rockchip-spdif mapping ok
reeing unused kernel memory: 400K (c09e9000 - c0a4d000)
[ 9.403643] Freeing unused kernel memory: 400K (c09e9000 - c0a4d000)
font: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
[ 9.422267] font: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
oftcursor: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
[ 9.446307] softcursor: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
itblit: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
[ 9.470763] bitblit: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
bcon: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
[ 9.494914] fbcon: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
udevd[141]: starting version 175
[ 9.525365] udevd[141]: starting version 175
EXT4-fs (mmcblk0p2): recovery complete
[ 9.738218] EXT4-fs (mmcblk0p2): recovery complete
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 9.754062] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 10.053205] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
ystemd[1]: Detected architecture 'arm'.
[ 10.095941] systemd[1]: Detected architecture 'arm'.
systemd[1]: Failed to insert module 'autofs4'
[ 10.150923] systemd[1]: Failed to insert module 'autofs4'
systemd[1]: Set hostname to <rabian-rock2-square>.
[ 10.166240] systemd[1]: Set hostname to <rabian-rock2-square>.
systemd-sysv-generator[260]: Ignoring creation of an alias rock.service for itself
[ 10.265266] systemd-sysv-generator[260]: Ignoring creation of an alias rock.service for itself
systemd[1]: Expecting device dev-ttyFIQ0.device...
[ 10.444542] systemd[1]: Expecting device dev-ttyFIQ0.device...
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 10.468456] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
ystemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 10.489131] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
ystemd[1]: Starting Remote File Systems (Pre).
[ 10.505515] systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems (Pre).
[ 10.520534] systemd[1]: Reached target Remote File Systems (Pre).
ystemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 10.539220] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
ystemd[1]: Starting Encrypted Volumes.
[ 10.556770] systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
[ 10.570683] systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 10.587475] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
ystemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 10.606717] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
ystemd[1]: Starting Swap.
[ 10.620802] systemd[1]: Starting Swap.
systemd[1]: Reached target Swap.
[ 10.631870] systemd[1]: Reached target Swap.
systemd[1]: Starting Root Slice.
[ 10.642928] systemd[1]: Starting Root Slice.
systemd[1]: Created slice Root Slice.
[ 10.654363] systemd[1]: Created slice Root Slice.
systemd[1]: Starting User and Session Slice.
[ 10.666788] systemd[1]: Starting User and Session Slice.
systemd[1]: Created slice User and Session Slice.
[ 10.680220] systemd[1]: Created slice User and Session Slice.
ystemd[1]: Starting Delayed Shutdown Socket.
[ 10.693705] systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
[ 10.707299] systemd[1]: Listening on Delayed Shutdown Socket.
ystemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 10.721778] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 10.737527] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
ystemd[1]: Starting Journal Socket (/dev/log).
[ 10.752152] systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket (/dev/log).
[ 10.765833] systemd[1]: Listening on Journal Socket (/dev/log).
ystemd[1]: Starting udev Control Socket.
[ 10.778919] systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
[ 10.791533] systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Kernel Socket.
[ 10.803975] systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
[ 10.816260] systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting Journal Socket.
[ 10.828107] systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
[ 10.839538] systemd[1]: Listening on Journal Socket.
systemd[1]: Starting System Slice.
[ 10.850720] systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
[ 10.861796] systemd[1]: Created slice System Slice.
systemd[1]: Starting system-getty.slice.
[ 10.873326] systemd[1]: Starting system-getty.slice.
systemd[1]: Created slice system-getty.slice.
[ 10.885396] systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-serial\x2dgetty.slice.
[ 10.898401] systemd[1]: Starting system-serial\x2dgetty.slice.
systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 10.912238] systemd[1]: Created slice system-serial\x2dgetty.slice.
systemd[1]: Starting Load Kernel Modules...
[ 10.926084] systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting udev Coldplug all Devices...
[ 10.938791] systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 10.955742] systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Set Up Additional Binary Formats.
[ 10.973033] systemd[1]: Started Set Up Additional Binary Formats.
ystemd[1]: Mounted POSIX Message Queue File System.
[ 10.987303] systemd[1]: Mounted POSIX Message Queue File System.
ystemd[1]: Mounted Huge Pages File System.
[ 11.000314] systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started live-config contains the components that configure a live system during the boot process (late userspace)..
[ 11.019773] systemd[1]: Started live-config contains the components that configure a live system during the boot process (late userspace)..
ystemd[1]: Mounting Debug File System...
[ 11.039036] systemd[1]: Mounting Debug File System...
systemd[1]: Starting Journal Service...
[ 11.050783] systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
[ 11.065368] systemd[1]: Started Journal Service.
systemd-udevd[291]: starting version 215
[ 11.229179] systemd-udevd[291]: starting version 215
systemd-journald[277]: Received request to flush runtime journal from PID 1
[ 11.396659] systemd-journald[277]: Received request to flush runtime journal from PID 1
mali ffa30000.gpu: Continuing without Mali clock control
[ 11.530343] mali ffa30000.gpu: Continuing without Mali clock control
mali pd enabled
[ 11.542075] mali pd enabled
clk enabled
[ 11.550245] clk enabled
MALI_DVFS_STEP=4,div_dvfs=10
[ 11.m559014] MALI_DVFS_STEP=4,div_dvfs=10
ali_dvfs_infotbl[0].clock=198000,min_threshold=0,max_threshold=70
mali_dvfs_infotbl[1].clock=297000[ 11.572385] mali_dvfs_infotbl[0].clock=198000,min_threshold=0,max_threshold=70
,min_threshold=70,max_threshold=80
mali_dvfs_infotbl[2].clock=417000,m[ 11.585397] mali_dvfs_infotbl[1].clock=297000,min_threshold=70,max_threshold=80
in_threshold=80,max_threshold=90
mali_dvfs_infotbl[3].clock=48000[ 11.598474] mali_dvfs_infotbl[2].clock=417000,min_threshold=80,max_threshold=90
0,min_threshold=94,max_threshold=100
turn on mali power
mali ffa300[ 11.611650] mali_dvfs_infotbl[3].clock=480000,min_threshold=94,max_threshold=100
00.gpu: GPU identified as 0x0750 r0p0 status 1mali ffa30000.gpu: Probed as [ 11.613491] turn on mali power
mali0
[ 11.625643] mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
=======================================================
[ 11.632053] mali ffa30000.gpu: Probed as mali0
[ 12.139356] =======================================================
=== Launching Wi-Fi driver! (Powered by Rockchip) ====
[ 12.161514] ==== Launching Wi-Fi driver! (Powered by Rockchip) ============================
==============================
[ 12.179399] =======================================================
WiFi driver (Powered by Rockchip,Ver 4.80.WFD.OOB) init.
======== PULL WL_REG_ON HIGH! ========
[WLAN_RFKILL]: rockchip_wifi_powe[ 12.197607] WiFi driver (Powered by Rockchip,Ver 4.80.WFD.OOB) init.
r: 1
[WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
[WLAN_RFKILL]: rockc[ 12.201344] ======== PULL WL_REG_ON HIGH! ========
hip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[ 12.211274] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 12.215623] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
[ 12.228643] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[WLAN_RFKILL]: wifi turn on power. 156
m[ 12.333790] [WLAN_RFKILL]: wifi turn on power. 156
mc2:mmc host rescan start!
[ 12.345059] mmc2:mmc host rescan start!
=========== WLAN placed in POWER ON ========
[ 12.356720] =========== WLAN placed in POWER ON ========
bcmsdh_register: Linux Kernel SDIO/MMC Driver
[ 12.370350] bcmsdh_register: Linux Kernel SDIO/MMC Driver
Dongle Host Driver, version 1.88.45.3 (r420671)
Compiled in drivers/net/wireless/bcmdhd on Jul 7 2015 at 19:14:12
[ 12.390025]
[ 12.390025] Dongle Host Driver, version 1.88.45.3 (r420671)
[ 12.390025] Compiled in drivers/net/wireless/bcmdhd on Jul 7 2015 at 19:14:12
rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc2]
[ 12.564558] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc2]
mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
mmc2: queuing unknown CIS tuple 0x80 (3 [ 12.597153] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
bytes)
[ 12.608386] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
mmc2: queuing unknown C[ 12.623152] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
IS tuple 0x80 (7 bytes)
[ 12.635791] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
rk_sdmmc: BOOT dw_mci_setup_bus: argue clk[ 12.690238] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
_mmc workaround out normal clock [mmc2]
rk_sdmmc: BOOT Bus speed=50000000Hz,Bus w[ 12.707073] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
idth=4bits.[mmc2]
mmc2: new high speed SDI[ 12.720741] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=4bits.[mmc2]
O card at address 0001
[WLAN_RFKILL]: rockchip_wifi_get_oob_irq[ 12.732880] mmc2: new high speed SDIO card at address 0001
: Enter
alloc static buf at dcfc0000!
[ 12.743044] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
FW_PATH = /lib/firmware/bcmwifi/fw_bcm4339a0_ag.bin
NVRAM_PATH = /lib/firmware/bcmwifi/nvram_AP6335.txt
F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0
DHD:[ 12.745830] alloc static buf at dcfc0000!
[ 12.761384] FW_PATH = /lib/firmware/bcmwifi/fw_bcm4339a0_ag.bin
[ 12.761384] NVRAM_PATH = /lib/firmware/bcmwifi/nvram_AP6335.txt
dongle ram size is set to 294912(orig 294912) at 0x0
tsk Enter, tsk = 0xc4fb0664
wl_crea[ 12.768445] F1 signature OK, socitype:0x1 chip:0x4330 rev:0x4 pkg:0x0
te_event_handler(): thread:wl_event_handler:1e0 started
dhd_attach(): thread:dhd_watchdog_thread:1[ 12.789422] DHD: dongle ram size is set to 294912(orig 294912) at 0x0
e1 started
dhd_attach(): thread:dhd_dpc:1e2 sta[ 12.792621] tsk Enter, tsk = 0xc4fb0664
rted
dhd_attach(): thread:dhd_sysioc:1e4 starte[ 12.804425] wl_create_event_handler(): thread:wl_event_handler:1e0 started
d
[WLAN_RFKILL]: rockchip_wifi_mac_addr: ent[ 12.815673] dhd_attach(): thread:dhd_watchdog_thread:1e1 started
er.
[WLAN_RFKILL]: falsh wifi_custom_mac_addr=[[ 12.823972] dhd_attach(): thread:dhd_dpc:1e2 started
00:00:00:00:00:00]
[WLAN_RFKILL]: This mac address is not val[ 12.834785] dhd_attach(): thread:dhd_sysioc:1e4 started
id, ignored...
Broadcom Dongle Host Driver[ 12.844852] [WLAN_RFKILL]: rockchip_wifi_mac_addr: enter.
: register interface [wlan0] MAC: 00:90:4c:11:22:33
======== PULL WL_REG_ON LOW! (flag = 2) ====[ 12.855125] [WLAN_RFKILL]: falsh wifi_custom_mac_addr=[00:00:00:00:00:00]
====
[WLAN_RFKILL]: rockchip_wifi_power: 0
[ 12.865301] [WLAN_RFKILL]: This mac address is not valid, ignored...
[ 12.879003] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
[ 12.890048] ======== PULL WL_REG_ON LOW! (flag = 2) ========
[ 12.893438] [WLAN_RFKILL]: rockchip_wifi_power: 0
[WLAN_RFKILL]: wifi shut off power.
[WLAN_RFKILL]: rockchip_wifi_ref_voltage:[ 13.002592] [WLAN_RFKILL]: wifi shut off power.
0
[WLAN_RFKILL]: rockchip_wifi_ref_volt[ 13.010911] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 0
age: wifi io reference voltage control is disabled.
=========== WLAN placed in RESET ====[ 13.023757] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
====
[ 13.036459] =========== WLAN placed in RESET ========
[BT_RFKILL]: ENABLE UART_RTS
[ 13.120062] [BT_RFKILL]: ENABLE UART_RTS
[BT_RFKILL]: DISABLE UART_RTS
[ 13.228507] [BT_RFKILL]: DISABLE UART_RTS
[BT_RFKILL]: bt turn on power
[ 13.242842] [BT_RFKILL]: bt turn on power
phy_power_on: enable = 1
[ 13.335110] phy_power_on: enable = 1
Read the Ethernet MAC address from IDB:0[ 13.384764] Read the Ethernet MAC address from IDB:0:00:00:000:0:000:0:00:00:000:0
eth0: device MAC address d6:5e:a2:8d00
:ea:d0
[ 13.396555] eth0: device MAC address d6:5e:a2:8d:ea:d0
libphy: stmmac: probed
eth0: PHY ID 001cc915 at 0 IR[ 13.408721] libphy: stmmac: probed
Q 0 (stmmac-0:00) active
eth0: PHY ID 001cc915 at 3 IRQ 0 [ 13.417031] eth0: PHY ID 001cc915 at 0 IRQ 0 (stmmac-0:00) active
(stmmac-0:03) active
[ 13.427807] eth0: PHY ID 001cc915 at 3 IRQ 0 (stmmac-0:03) active
phy_power_on: enable = 0
[ 13.448632] phy_power_on: enable = 0
phy_power_on: enable = 1
[ 13.454597] phy_power_on: enable = 1
rk_iommu ff930300.vopb_mmu: (vopb) Disabled
rk_iommu ff930300.vopb_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x1d670000
eth0: device MAC address d6:5e:a2:8d:ea:d0
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
rk3288-lcdc lcdc0: blank mode:1
[ 13.479785] rk_iommu ff930300.vopb_mmu: (vopb) Disabled
[ 13.488169] rk_iommu ff930300.vopb_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x1d670000
[ 13.493717] eth0: device MAC address d6:5e:a2:8d:ea:d0
[ 13.509228] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.515674] rk3288-lcdc lcdc0: blank mode:1
Dongle Host Driver, version 1.88.45.3 (r420671)
Compiled in drivers/net/wireless/bcmdhd on Jul 7 2015 at 19:14:12
[ 13.555383]
[ 13.555383] Dongle Host Driver, version 1.88.45.3 (r420671)
[ 13.555383] Compiled in drivers/net/wireless/bcmdhd on Jul 7 2015 at 19:14:12
l_android_wifi_on in 1
[ 13.571469] wl_android_wifi_on in 1
wl_android_wifi_on in 2: g_wifi_on=0
=[ 13.578147] wl_android_wifi_on in 2: g_wifi_on=0
======= PULL WL_REG_ON HIGH! (flag = 2) ========
[ 13.587051] ======== PULL WL_REG_ON HIGH! (flag = 2) ==[======
WLAN_RFKILL]: rockchip_wifi_power: 1
[ 13.596030] [WLAN_RFK[ILL]: rockchip_wifi_power: 1
WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
[ 13.604498] [WLAN_RFKILL]: ro[ckchip_wifi_ref_voltage: 1
WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[ 13.617317] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[WLAN_RFKILL]: wifi turn on power. 156
=[ 13.721279] [WLAN_RFKILL]: wifi turn on power. 156
========== WLAN going back to live ========
[ 13.730207] =========== WLAN going back to live ========
sdio_reset_comm():
[ 13.737323] sdio_reset_comm():
mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
[ 13.748874] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
k_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 400000Hz for init[mmc2]
[ 13.766010] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 400000Hz for init[mmc2]
rk_iommu ff930300.vopb_mmu: (vopb) Enabled
rk_iommu ff930300.vopb_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x1d670000
rk3288-lcdc lcdc0: blank mode:0
[ 13.779508] rk_iommu ff930300.vopb_mmu: (vopb) Enabled
[ 13.791111] rk3288-lcdc lcdc0: blank mode:0
mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[ 13.804415] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 13.813939] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 13.823449] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 13.832953] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 13.925633] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
k_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
[ 13.942439] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaro
und out normal clock [mmc2]
dhd_bus_devreset: == WLAN ON ==
[ 13.954135]
[ 13.954135]
[ 13.954135] dhd_bus_devreset: == WLAN ON ==
hd_bus_devreset called when dongle is not in reset
[ 13.965686] dhd_bus_devreset called when dongle is not in reset
ill call dhd_bus_start instead
[ 13.974309] Will call dhd_bus_start instead
dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/bcmwifi/fw_RK903_ag.bin
[ 13.985650] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/bcmwifi/fw_RK903_ag.bin
Final fw_path=/lib/firmware/bcmwifi/fw_RK903_ag.bin
[ 13.998587] Final fw_path=/lib/firmware/bcmwifi/fw_RK903_aFg.bin
inal nv_path=/lib/firmware/bcmwifi/nvram_AP6335.txt
[ 14.009023] Final nv_path=/lib/firmware/bcmwifi/nvram_AP6335.txt
inal conf_path=/lib/firmware/bcmwifi/config.txt
[ 14.019112] Final conf_path=/lib/firmware/bcmwifi/config.txt
NVRAM version: A[ 14.056790] NVRAM version: APP63633535__NVNRVRAAMM_V_1V1.7.7__0401401022001414
Re: Linux on XORO MegaPad gives a lot of errors
Code: Select all
[ 23.321788] =========== WLAN placed in RESET ========
wl_android_wifi_on: Failed
d[ 23.329559] wl_android_wifi_on: Failed
hd_open : wl_android_wifi_on failed (-19)
[ 23.337509] dhd_open : wl_android_wifi_on failed (-19)
wl_android_wifi_off in 1
[ 23.345140] wl_android_wifi_off in 1
wl_android_wifi_off in 2: g_wifi_on=0
wl_android_wifi_off out
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 23.352512] wl_android_wifi_off in 2: g_wifi_on=0
[ 23.355626] wl_android_wifi_off out
[ 23.363428] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Dongle Host Driver, version 1.88.45.3 (r420671)
Compiled in drivers/net/wireless/bcmdhd on Jul 7 2015 at 19:14:12
[ 23.461687]
[ 23.461687] Dongle Host Driver, version 1.88.45.3 (r420671)
[ 23.461687] Compiled in drivers/net/wireless/bcmdhd on Jul 7 2015 at 19:14:12
l_android_wifi_on in 1
[ 23.478064] wl_android_wifi_on in 1
wl_android_wifi_on in 2: g_wifi_on=0
[ 23.484800] wl_and=roid_wifi_on in 2: g_wifi_on=0
======= PULL WL_REG_ON HIGH! (flag = 2) ========
[ 23.493690] ======== PULL WL_REG_ON HIGH! (flag = 2) ========
WLAN_RFKILL]: rockchip_wifi_power: 1
[ 23.502581] [WLAN[_RFKILL]: rockchip_wifi_power: 1
WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
[ 23.5[11046] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[ 23.523862] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[WLAN_RFKILL]: wifi turn on power. 156
=[ 23.630534] [WLAN_RFKILL]: wifi turn on power. 156
========== WLAN going back to live ========
[ 23.639785] =========== WLAN going back to live ========
sdio_reset_comm():
[ 23.647111] sdio_reset_comm():
mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
[ 23.659680] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
k_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 400000Hz for init[mmc2]
[ 23.677364] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 400000Hz for init[mmc2]
mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[ 23.704361] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 23.714458] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 23.724518] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 23.735458] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 23.843461] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
k_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
[ 23.860965] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
dhd_bus_devreset: == WLAN ON ==
[ 23.872924]
[ 23.872924]
[ 23.872924] dhd_bus_devreset: == WLAN ON ==
dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/bcmwifi/fw_RK903_ag.bin
[ 23.892451] dhd_conf_set_fw_name_by_chip: firmware_path=/lib/firmware/bcmwifi/fw_RK903_ag.bin
inal fw_path=/lib/firmware/bcmwifi/fw_RK903_ag.bin
[ 23.905269] Final fw_path=/Flib/firmware/bcmwifi/fw_RK903_ag.bin
inal nv_path=/lib/firmware/bcmwifi/nvram_AP6335.txt
[ 23.915699] Final nv_path=/lib/firmwaFre/bcmwifi/nvram_AP6335.txt
inal conf_path=/lib/firmware/bcmwifi/config.txt
[ 23.925869] Final conf_path=/lib/firmware/bcmwifi/config.txt
NVRAM version: A[ 23.951242] NVRAM version: AP6P363353_5N_VNRVARMA_MV_1V.17._70_40140120020141
4
bcmsdh_sdmmc: enable F2 failed:-62[ b 25.991068] bcmsdh_sdmmc: enable F2 failed:-62cmsdh_sdmmc: Failed to Write byte F0:@0x00002=06, Err: -62
bcmsdh_sdmmc: Failed to Write byte F0:@0x00002=06, Err: -62
bcmsdh_sdmmc: enable F2 failed:-62[ 27.978749] bcmsdh_sdmmc:b enable F2 failed:-62cmsdh_sdmmc: Failed to Write byte F0:@0x00002=06, Err: -62
bcmsdh_sdmmc: Failed to Write byte F0:@0x00002=06, Err: -62
bcmsdh_sdmmc: enable F2 failed:-62[ b 29.966431] bcmsdh_sdmmc: enable F2 failed:-62cmsdh_sdmmc: Failed to Write byte F0:@0x00002=06, Err: -62
...
Re: Linux on XORO MegaPad gives a lot of errors
There are some gazillion Debian based distros, better seek help from their own forums/web-sites.
We focus here on Debian.
We focus here on Debian.
Re: Linux on XORO MegaPad gives a lot of errors
Hello arzgi,
It is not Debian, it is Rabian but it is so similar to Debian and it didn't exist a Rabian forum,
that is why im posting on this forum!
I hope anyone can help!
It is not Debian, it is Rabian but it is so similar to Debian and it didn't exist a Rabian forum,
that is why im posting on this forum!
I hope anyone can help!
Re: Linux on XORO MegaPad gives a lot of errors
Raspberry Pi is a SoC computer.
Rasbian is a operating system, Debian based as Ubuntu, Kali, etc. There are so many, I and most of us do not know and care what they have done to Debian so that it comes a new OS.
I suggest again those forums, and good to learn to use search engines too.
https://www.makeuseof.com/tag/how-to-linux-on-android/
Rasbian is a operating system, Debian based as Ubuntu, Kali, etc. There are so many, I and most of us do not know and care what they have done to Debian so that it comes a new OS.
I suggest again those forums, and good to learn to use search engines too.
https://www.makeuseof.com/tag/how-to-linux-on-android/
Re: Linux on XORO MegaPad gives a lot of errors
my device is a RK3288 (in ASUS tinker board) (has NO bios only the emmc) based tablet with LVDS display interface and i want to run Linux natively the only Android version ruining on this device is Android 5.1
Last edited by Hannescam on 2021-06-02 13:55, edited 1 time in total.
Re: Linux on XORO MegaPad gives a lot of errors
tinkerOS doesn't boot
Last edited by Hannescam on 2021-06-03 15:44, edited 1 time in total.
Re: Linux on XORO MegaPad gives a lot of ors
You should find out yourself, perhaps linux questions. Did you even check the link I gave?
Another path would check those errors you got when you tried raspbian Quite many of them where same just number changed if you cannot not find answers, I repeat myself, if you use raspbian, best advice would be raspberry-forums, since they know raspbian.
Another path would check those errors you got when you tried raspbian Quite many of them where same just number changed if you cannot not find answers, I repeat myself, if you use raspbian, best advice would be raspberry-forums, since they know raspbian.
Re: Linux on XORO MegaPad gives a lot of errors
that isn't a raspberry pi Raspbian only works on raspberrys
Re: Linux on XORO MegaPad gives a lot of errors
i didn't use Raspbian i used Rabian this link (website: https://wiki.radxa.com/Rock/prebuilt_images download: https://dl.radxa.com/rock2/images/rabian/emmc/)
- sunrat
- Administrator
- Posts: 6495
- Joined: 2006-08-29 09:12
- Location: Melbourne, Australia
- Has thanked: 118 times
- Been thanked: 476 times
Re: Linux on XORO MegaPad gives a lot of errors
Moving thread to Offtopic as it is not about Debian.
“ computer users can be divided into 2 categories:
Those who have lost data
...and those who have not lost data YET ” Remember to BACKUP!
Those who have lost data
...and those who have not lost data YET ” Remember to BACKUP!