Can use VZW Env3 as a usb modem in Crunchbang, not Debian

[noalternative]

When I connect my Verizon LG Env3 through usb cable, to a netbook with Crunchbang Waldorf, network manager offers an option that says "make new mobile broadband connection. When I attach this device to my Debian lxde Wheezy laptop it does not offer an option to make one. Crunchbang waldorf is basically Debian Wheezy so what gives?

lsusb detects it.

noalternative@390e:~$ lsusb
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 002 Device 003: ID 1004:6000 LG Electronics, Inc. KU330/KU990/VX4400/VX6000
Bus 002 Device 004: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) DM9601 Fast Ethernet Adapter
Bus 002 Device 005: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
Bus 002 Device 006: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 002 Device 007: ID 0a5c:4502 Broadcom Corp. Keyboard (Boot Interface Subclass)
Bus 002 Device 008: ID 0a5c:4503 Broadcom Corp. Mouse (Boot Interface Subclass)
Bus 002 Device 009: ID 0461:4d75 Primax Electronics, Ltd Rocketfish RF-FLBTAD Bluetooth Adapter
noalternative@390e:~$


usb-devices detects it.

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=03.02
S: Manufacturer=Linux 3.2.0-4-486 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:02.2
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 5
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev=03.02
S: Manufacturer=Linux 3.2.0-4-486 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:02:00.2
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1a40 ProdID=0101 Rev=01.11
S: Product=USB 2.0 Hub
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=02(commc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1004 ProdID=6000 Rev=00.00
S: Manufacturer=LG CDMA USB Modem
S: Product=LG CDMA USB Modem
C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=00 Driver=qcaux
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=00 Driver=qcaux

T: Bus=02 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0fe6 ProdID=9700 Rev=01.01
S: Product=USB 2.0 10/100M Ethernet Adaptor
C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=120mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=dm9601

T: Bus=02 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=7392 ProdID=7811 Rev=02.00
S: Manufacturer=Realtek
S: Product=802.11n WLAN Adapter
S: SerialNumber=00e04c000001
C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=ff Prot=ff Driver=rtl8192cu

T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=04 Dev#= 6 Spd=12 MxCh= 3
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0a5c ProdID=4500 Rev=01.00
S: Manufacturer=Broadcom
S: Product=BCM2046B1
C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=94mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

T: Bus=02 Lev=03 Prnt=06 Port=00 Cnt=01 Dev#= 7 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0a5c ProdID=4502 Rev=01.00
C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=2mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid

T: Bus=02 Lev=03 Prnt=06 Port=01 Cnt=02 Dev#= 8 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0a5c ProdID=4503 Rev=01.00
C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=2mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid

T: Bus=02 Lev=03 Prnt=06 Port=02 Cnt=03 Dev#= 9 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0461 ProdID=4d75 Rev=06.67
S: Manufacturer=Broadcom Corp
S: Product=Rocketfish Bluetooth Adapter
S: SerialNumber=0002762A9C1F
C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=2mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)

T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=03.02
S: Manufacturer=Linux 3.2.0-4-486 ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:02:00.0
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0001 Rev=03.02
S: Manufacturer=Linux 3.2.0-4-486 ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:02:00.1
C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
noalternative@390e:~$

dmesg detects it

noalternative@390e:~$ demsg
bash: demsg: command not found
noalternative@390e:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-486 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.2.57-3+deb7u2
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e9000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[ 0.000000] BIOS-e820: 000000000fff0000 - 000000000ffffc00 (ACPI data)
[ 0.000000] BIOS-e820: 000000000ffffc00 - 0000000010000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fffe9000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.1 present.
[ 0.000000] DMI: IBM 2626E0U/2626E0U, BIOS R01_B4 11/09/99
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xfff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] Base memory trampoline at [c009c000] 9c000 size 12288
[ 0.000000] init_memory_mapping: 0000000000000000-000000000fff0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 000fc00000 page 2M
[ 0.000000] 000fc00000 - 000fff0000 page 4k
[ 0.000000] kernel direct mapping tables up to fff0000 @ 17f8000-1800000
[ 0.000000] RAMDISK: 0ee78000 - 0f7ca000
[ 0.000000] ACPI: RSDP 000f71a0 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 0fffaf6a 0002C (v01 PTLTD RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0ffffb65 00074 (v01 IBM 430BX 06040000 PTL 000F4240)
[ 0.000000] ACPI: DSDT 0fffaf96 04BCF (v01 IBM BT2 06040000 MSFT 01000007)
[ 0.000000] ACPI: FACS 0fffffc0 00040
[ 0.000000] ACPI: BOOT 0ffffbd9 00027 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0fff0000
[ 0.000000] low ram: 0 - 0fff0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000fff0
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0000fff0
[ 0.000000] On node 0 totalpages: 65407
[ 0.000000] free_area_init_node: node 0, pgdat c13c5ad8, node_mem_map cfdef200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 60944 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e9000
[ 0.000000] PM: Registered nosave memory: 00000000000e9000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:effe9000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64895
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-486 root=UUID=9433d958-45d6-46bc-a483-a9f3ca2df1a9 ro quiet
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 244904k/262080k available (2599k kernel code, 16724k reserved, 1290k data, 456k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xd07f0000 - 0xff7fe000 ( 752 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
[ 0.000000] .init : 0xc13cd000 - 0xc143f000 ( 456 kB)
[ 0.000000] .data : 0xc1289cec - 0xc13cc700 (1290 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1289cec (2599 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=cf806000 soft=cf808000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 331.734 MHz processor.
[ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 663.46 BogoMIPS (lpj=1326936)
[ 0.004044] pid_max: default: 32768 minimum: 301
[ 0.004304] Security Framework initialized
[ 0.004346] AppArmor: AppArmor disabled by boot time parameter
[ 0.004446] Mount-cache hash table entries: 512
[ 0.005044] Initializing cgroup subsys cpuacct
[ 0.005076] Initializing cgroup subsys memory
[ 0.005128] Initializing cgroup subsys devices
[ 0.005146] Initializing cgroup subsys freezer
[ 0.005164] Initializing cgroup subsys net_cls
[ 0.005181] Initializing cgroup subsys blkio
[ 0.005224] Initializing cgroup subsys perf_event
[ 0.005464] CPU: Intel Mobile Pentium II stepping 0a
[ 0.008950] ACPI: Core revision 20110623
[ 0.022396] ACPI: setting ELCR to 0200 (from 0820)
[ 0.032024] Performance Events:
[ 0.032045] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.032062] no hardware sampling interrupt available.
[ 0.032080] p6 PMU driver.
[ 0.032101] ... version: 0
[ 0.032115] ... bit width: 32
[ 0.032129] ... generic registers: 2
[ 0.032143] ... value mask: 00000000ffffffff
[ 0.032159] ... max period: 000000007fffffff
[ 0.032173] ... fixed-purpose events: 0
[ 0.032187] ... event mask: 0000000000000003
[ 0.033349] NMI watchdog disabled (cpu0): not supported (no LAPIC?)
[ 0.034480] devtmpfs: initialized
[ 0.035396] PM: Registering ACPI NVS region at ffffc00 (1024 bytes)
[ 0.036767] print_constraints: dummy:
[ 0.037159] NET: Registered protocol family 16
[ 0.037877] EISA bus registered
[ 0.038164] ACPI: bus type pci registered
[ 0.042473] PCI: PCI BIOS revision 2.10 entry at 0xfd9c5, last bus=4
[ 0.042493] PCI: Using configuration type 1 for base access
[ 0.048339] bio: create slab <bio-0> at 0
[ 0.048901] ACPI: Added _OSI(Module Device)
[ 0.048924] ACPI: Added _OSI(Processor Device)
[ 0.048945] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.048965] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.052408] ACPI: EC: Look up EC in DSDT
[ 0.065904] ACPI: Interpreter enabled
[ 0.065948] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.066106] ACPI: Using PIC for interrupt routing
[ 0.133226] ACPI: Power Resource [PFNH] (off)
[ 0.133627] ACPI: Power Resource [PFNM] (off)
[ 0.134039] ACPI: Power Resource [PFNL] (off)
[ 0.136468] ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
[ 0.138416] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.138438] HEST: Table not found.
[ 0.138471] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.144676] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.156906] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.156939] pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
[ 0.156965] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.156991] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.157016] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.157041] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.157066] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
[ 0.157091] pci_root PNP0A03:00: host bridge window [mem 0x000e4000-0x000e7fff] (ignored)
[ 0.157118] pci_root PNP0A03:00: host bridge window [mem 0x10000000-0xffdfffff] (ignored)
[ 0.157144] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.157168] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.157246] pci 0000:00:00.0: [8086:7190] type 0 class 0x000600
[ 0.157294] pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref]
[ 0.157469] pci 0000:00:01.0: [8086:7191] type 1 class 0x000604
[ 0.157589] pci 0000:00:02.0: [8086:7110] type 0 class 0x000680
[ 0.157779] pci 0000:00:02.1: [8086:7111] type 0 class 0x000101
[ 0.157877] pci 0000:00:02.1: reg 20: [io 0xfc90-0xfc9f]
[ 0.157990] pci 0000:00:02.2: [8086:7112] type 0 class 0x000c03
[ 0.158090] pci 0000:00:02.2: reg 20: [io 0xfca0-0xfcbf]
[ 0.158206] pci 0000:00:02.3: [8086:7113] type 0 class 0x000680
[ 0.158230] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[ 0.158241] * this clock source is slow. Consider trying other clock sources
[ 0.158383] pci 0000:00:02.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI
[ 0.158412] pci 0000:00:02.3: quirk: [io 0x1040-0x104f] claimed by PIIX4 SMB
[ 0.158445] pci 0000:00:02.3: PIIX4 devres E PIO at 03b8-03bf
[ 0.158473] pci 0000:00:02.3: PIIX4 devres G PIO at 002e-002f
[ 0.158569] pci 0000:00:03.0: [104c:ac1d] type 2 class 0x000607
[ 0.158622] pci 0000:00:03.0: reg 10: [mem 0x10000000-0x10000fff]
[ 0.158693] pci 0000:00:03.0: supports D1 D2
[ 0.158715] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.158803] pci 0000:00:03.1: [104c:ac1d] type 2 class 0x000607
[ 0.158856] pci 0000:00:03.1: reg 10: [mem 0x20000000-0x20000fff]
[ 0.158925] pci 0000:00:03.1: supports D1 D2
[ 0.158946] pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot
[ 0.159042] pci 0000:00:06.0: [11c1:0449] type 0 class 0x000780
[ 0.159093] pci 0000:00:06.0: reg 10: [mem 0xfedffc00-0xfedffcff]
[ 0.159130] pci 0000:00:06.0: reg 14: [io 0x03f8-0x03ff]
[ 0.159166] pci 0000:00:06.0: reg 18: [io 0xf800-0xf8ff]
[ 0.159284] pci 0000:00:06.0: supports D2
[ 0.159305] pci 0000:00:06.0: PME# supported from D2 D3hot D3cold
[ 0.159390] pci 0000:00:07.0: [125d:1969] type 0 class 0x000401
[ 0.159442] pci 0000:00:07.0: reg 10: [io 0xfcc0-0xfcff]
[ 0.159479] pci 0000:00:07.0: reg 14: [io 0xfc60-0xfc6f]
[ 0.159515] pci 0000:00:07.0: reg 18: [io 0xfc70-0xfc7f]
[ 0.159551] pci 0000:00:07.0: reg 1c: [io 0xfc58-0xfc5b]
[ 0.159587] pci 0000:00:07.0: reg 20: [io 0xfc5c-0xfc5f]
[ 0.159681] pci 0000:00:07.0: supports D1 D2
[ 0.159850] pci 0000:01:00.0: [10c8:0005] type 0 class 0x000300
[ 0.159901] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff pref]
[ 0.159939] pci 0000:01:00.0: reg 14: [mem 0xfe400000-0xfe7fffff]
[ 0.159975] pci 0000:01:00.0: reg 18: [mem 0xfeb00000-0xfebfffff]
[ 0.160123] pci 0000:01:00.0: supports D1 D2
[ 0.160221] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.160252] pci 0000:00:01.0: bridge window [mem 0xfe400000-0xfebfffff]
[ 0.160281] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf6ffffff pref]
[ 0.160315] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.160349] pci 0000:00:03.1: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.160510] pci_bus 0000:00: on NUMA node 0
[ 0.160544] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.160878] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.161272] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.174273] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[ 0.174705] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 14 15)
[ 0.175132] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[ 0.175558] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 14 15)
[ 0.176378] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.176403] vgaarb: loaded
[ 0.176417] vgaarb: bridge control possible 0000:01:00.0
[ 0.176822] PCI: Using ACPI for IRQ routing
[ 0.176954] PCI: pci_cache_line_size set to 32 bytes
[ 0.177124] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.177147] reserve RAM buffer: 000000000fff0000 - 000000000fffffff
[ 0.178040] Switching to clocksource pit
[ 0.187607] pnp: PnP ACPI init
[ 0.187800] ACPI: bus type pnp registered
[ 0.196692] pnp 00:00: [bus 00-ff]
[ 0.196721] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.196745] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.196769] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.196792] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.196815] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.196838] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.196862] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.196885] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.196908] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.196931] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.196954] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.196989] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.197013] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.197036] pnp 00:00: [mem 0x10000000-0xffdfffff window]
[ 0.197059] pnp 00:00: [mem 0x00000000 window]
[ 0.197082] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.197104] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.197126] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.197545] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.197718] pnp 00:01: [io 0x0000-0x000f]
[ 0.197741] pnp 00:01: [io 0x0081-0x008f]
[ 0.197762] pnp 00:01: [io 0x00c0-0x00df]
[ 0.197785] pnp 00:01: [dma 4]
[ 0.198083] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.198208] pnp 00:02: [io 0x0070-0x0071]
[ 0.198238] pnp 00:02: [irq 8]
[ 0.198477] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.198570] pnp 00:03: [io 0x0061]
[ 0.198800] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.198898] pnp 00:04: [io 0x0060]
[ 0.198920] pnp 00:04: [io 0x0064]
[ 0.198943] pnp 00:04: [irq 1]
[ 0.199184] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.199346] pnp 00:05: [irq 12]
[ 0.199598] pnp 00:05: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
[ 0.199697] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.199722] pnp 00:06: [irq 13]
[ 0.199968] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.200605] pnp 00:07: [io 0x0010-0x001f]
[ 0.200629] pnp 00:07: [io 0x0024-0x0025]
[ 0.200651] pnp 00:07: [io 0x0028-0x0029]
[ 0.200672] pnp 00:07: [io 0x002c-0x002d]
[ 0.200693] pnp 00:07: [io 0x0038-0x0039]
[ 0.200713] pnp 00:07: [io 0x003c-0x003d]
[ 0.200734] pnp 00:07: [io 0x0050-0x0053]
[ 0.200754] pnp 00:07: [io 0x0072-0x0077]
[ 0.200774] pnp 00:07: [io 0x0080]
[ 0.200794] pnp 00:07: [io 0x0090-0x009f]
[ 0.200815] pnp 00:07: [io 0x00a4-0x00a5]
[ 0.200836] pnp 00:07: [io 0x00a8-0x00a9]
[ 0.200856] pnp 00:07: [io 0x00ac-0x00ad]
[ 0.200876] pnp 00:07: [io 0x00b0-0x00b5]
[ 0.200897] pnp 00:07: [io 0x00b8-0x00b9]
[ 0.200917] pnp 00:07: [io 0x00bc-0x00bd]
[ 0.200938] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.200959] pnp 00:07: [io 0x1000-0x103f]
[ 0.200980] pnp 00:07: [io 0x1040-0x104f]
[ 0.201000] pnp 00:07: [io 0x1050-0x105f]
[ 0.201021] pnp 00:07: [io 0xfca0-0xfcaf]
[ 0.201135] pnp 00:07: disabling [io 0xfca0-0xfcaf] because it overlaps 0000:00:02.2 BAR 4 [io 0xfca0-0xfcbf]
[ 0.201512] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.201542] system 00:07: [io 0x1000-0x103f] has been reserved
[ 0.201569] system 00:07: [io 0x1040-0x104f] has been reserved
[ 0.201597] system 00:07: [io 0x1050-0x105f] has been reserved
[ 0.201628] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.201925] pnp 00:08: [mem 0x00000000-0x0009fbff]
[ 0.202013] pnp 00:08: [mem 0x000e0000-0x000fffff]
[ 0.202037] pnp 00:08: [mem 0x00100000-0x00ffffff]
[ 0.202059] pnp 00:08: [mem 0xfff80000-0xfffdffff]
[ 0.202082] pnp 00:08: [mem 0xfffe0000-0xffffffff]
[ 0.202412] system 00:08: [mem 0x00000000-0x0009fbff] could not be reserved
[ 0.202446] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.202475] system 00:08: [mem 0x00100000-0x00ffffff] could not be reserved
[ 0.202505] system 00:08: [mem 0xfff80000-0xfffdffff] has been reserved
[ 0.202534] system 00:08: [mem 0xfffe0000-0xffffffff] could not be reserved
[ 0.202565] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.212656] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (disabled)
[ 0.227153] pnp 00:0a: can't evaluate _CRS: 12319
[ 0.232534] pnp 00:0a: can't evaluate _PRS: 12319
[ 0.232932] pnp 00:0a: Plug and Play ACPI device, IDs IBM0071 PNP0511 (active)
[ 0.247514] pnp 00:0b: [io 0x03bc-0x03bf]
[ 0.247541] pnp 00:0b: [irq 7]
[ 0.252306] pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.278255] pnp 00:0c: [io 0x03f0-0x03f5]
[ 0.278279] pnp 00:0c: [io 0x03f7]
[ 0.278302] pnp 00:0c: [irq 6]
[ 0.278323] pnp 00:0c: [dma 2]
[ 0.283538] pnp 00:0c: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.284135] pnp: PnP ACPI: found 13 devices
[ 0.284153] ACPI: ACPI bus type pnp unregistered
[ 0.284177] PnPBIOS: Disabled by ACPI PNP
[ 0.336920] Switching to clocksource acpi_pm
[ 0.337016] PCI: max bus depth: 1 pci_try_num: 2
[ 0.337144] pci 0000:00:03.1: BAR 16: assigned [mem 0x14000000-0x17ffffff]
[ 0.337178] pci 0000:00:03.1: BAR 15: assigned [mem 0x18000000-0x1bffffff pref]
[ 0.337217] pci 0000:00:03.1: BAR 14: assigned [io 0x1400-0x14ff]
[ 0.337250] pci 0000:00:03.1: BAR 13: assigned [io 0x1800-0x18ff]
[ 0.337281] pci 0000:00:03.0: BAR 16: assigned [mem 0x1c000000-0x1fffffff]
[ 0.337313] pci 0000:00:03.0: BAR 15: assigned [mem 0x24000000-0x27ffffff pref]
[ 0.337348] pci 0000:00:03.0: BAR 14: assigned [io 0x1c00-0x1cff]
[ 0.337381] pci 0000:00:03.0: BAR 13: assigned [io 0x2000-0x20ff]
[ 0.337410] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.337441] pci 0000:00:01.0: bridge window [mem 0xfe400000-0xfebfffff]
[ 0.337468] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf6ffffff pref]
[ 0.337499] pci 0000:00:03.0: CardBus bridge to [bus 02-05]
[ 0.337521] pci 0000:00:03.0: bridge window [io 0x2000-0x20ff]
[ 0.337546] pci 0000:00:03.0: bridge window [io 0x1c00-0x1cff]
[ 0.337573] pci 0000:00:03.0: bridge window [mem 0x24000000-0x27ffffff pref]
[ 0.337600] pci 0000:00:03.0: bridge window [mem 0x1c000000-0x1fffffff]
[ 0.337626] pci 0000:00:03.1: CardBus bridge to [bus 06-09]
[ 0.337647] pci 0000:00:03.1: bridge window [io 0x1800-0x18ff]
[ 0.337672] pci 0000:00:03.1: bridge window [io 0x1400-0x14ff]
[ 0.337699] pci 0000:00:03.1: bridge window [mem 0x18000000-0x1bffffff pref]
[ 0.337726] pci 0000:00:03.1: bridge window [mem 0x14000000-0x17ffffff]
[ 0.337812] pci 0000:00:03.0: power state changed by ACPI to D0
[ 0.337845] pci 0000:00:03.0: power state changed by ACPI to D0
[ 0.338713] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.338735] PCI: setting IRQ 11 as level-triggered
[ 0.338774] pci 0000:00:03.0: setting latency timer to 64
[ 0.338814] pci 0000:00:03.1: power state changed by ACPI to D0
[ 0.338846] pci 0000:00:03.1: power state changed by ACPI to D0
[ 0.338889] pci 0000:00:03.1: setting latency timer to 64
[ 0.338917] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.338941] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.338967] pci_bus 0000:01: resource 1 [mem 0xfe400000-0xfebfffff]
[ 0.338992] pci_bus 0000:01: resource 2 [mem 0xf6000000-0xf6ffffff pref]
[ 0.339017] pci_bus 0000:02: resource 0 [io 0x2000-0x20ff]
[ 0.339040] pci_bus 0000:02: resource 1 [io 0x1c00-0x1cff]
[ 0.339064] pci_bus 0000:02: resource 2 [mem 0x24000000-0x27ffffff pref]
[ 0.339088] pci_bus 0000:02: resource 3 [mem 0x1c000000-0x1fffffff]
[ 0.339113] pci_bus 0000:06: resource 0 [io 0x1800-0x18ff]
[ 0.339135] pci_bus 0000:06: resource 1 [io 0x1400-0x14ff]
[ 0.339159] pci_bus 0000:06: resource 2 [mem 0x18000000-0x1bffffff pref]
[ 0.339183] pci_bus 0000:06: resource 3 [mem 0x14000000-0x17ffffff]
[ 0.339546] NET: Registered protocol family 2
[ 0.339993] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.341498] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.341868] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.342050] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.342068] TCP reno registered
[ 0.342092] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.342136] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.342620] NET: Registered protocol family 1
[ 0.342721] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.343601] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.343733] pci 0000:01:00.0: Boot video device
[ 0.343757] PCI: CLS 0 bytes, default 32
[ 0.344326] Unpacking initramfs...
[ 2.534491] Freeing initrd memory: 9544k freed
[ 2.634033] Simple Boot Flag at 0x40 set to 0x1
[ 2.637835] audit: initializing netlink socket (disabled)
[ 2.637912] type=2000 audit(1402422069.632:1): initialized
[ 2.731806] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.732773] VFS: Disk quotas dquot_6.5.2
[ 2.732934] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.733338] msgmni has been set to 496
[ 2.734462] alg: No test for stdrng (krng)
[ 2.734678] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.734705] io scheduler noop registered
[ 2.734721] io scheduler deadline registered
[ 2.734794] io scheduler cfq registered (default)
[ 2.735570] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.735757] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.735777] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 2.736763] acpiphp: Slot [1] registered
[ 2.737886] ERST: Table is not found!
[ 2.737903] GHES: HEST is not enabled!
[ 2.738014] isapnp: Scanning for PnP cards...
[ 3.091674] isapnp: No Plug & Play device found
[ 3.092179] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.112623] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.113075] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 3.114793] serial 00:09: [io 0x03e8-0x03ef]
[ 3.114938] serial 00:09: [irq 4]
[ 3.145806] serial 00:09: activated
[ 3.166696] 00:09: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[ 3.168200] Linux agpgart interface v0.103
[ 3.169017] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[ 3.179748] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 3.181026] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12
[ 3.183989] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.184103] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.185138] mousedev: PS/2 mouse device common for all mice
[ 3.185431] rtc_cmos 00:02: RTC can wake from S4
[ 3.185982] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 3.186057] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 3.186403] EISA: Probing bus 0 at eisa.0
[ 3.186439] Cannot allocate resource for EISA slot 1
[ 3.186459] Cannot allocate resource for EISA slot 2
[ 3.186524] EISA: Detected 0 cards.
[ 3.186544] cpuidle: using governor ladder
[ 3.186560] cpuidle: using governor menu
[ 3.188475] TCP cubic registered
[ 3.188697] NET: Registered protocol family 10
[ 3.192650] Mobile IPv6
[ 3.192675] NET: Registered protocol family 17
[ 3.192713] Registering the dns_resolver key type
[ 3.192821] Using IPI Shortcut mode
[ 3.193644] PM: Hibernation image not present or could not be loaded.
[ 3.193721] registered taskstats version 1
[ 3.194846] rtc_cmos 00:02: setting system clock to 2014-06-10 17:41:07 UTC (1402422067)
[ 3.195136] Initializing network drop monitor service
[ 3.195968] Freeing unused kernel memory: 456k freed
[ 3.199800] Write protecting the kernel text: 2600k
[ 3.199955] Write protecting the kernel read-only data: 1032k
[ 3.215305] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.301562] udevd[42]: starting version 175
[ 3.728218] Refined TSC clocksource calibration: 331.704 MHz.
[ 3.728263] Switching to clocksource tsc
[ 3.899232] SCSI subsystem initialized
[ 3.955583] usbcore: registered new interface driver usbfs
[ 3.955767] usbcore: registered new interface driver hub
[ 3.982412] usbcore: registered new device driver usb
[ 4.065700] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.164751] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.165089] uhci_hcd 0000:00:02.2: UHCI Host Controller
[ 4.165265] uhci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 4.165379] uhci_hcd 0000:00:02.2: irq 11, io base 0x0000fca0
[ 4.165660] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.165686] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.165709] usb usb1: Product: UHCI Host Controller
[ 4.165729] usb usb1: Manufacturer: Linux 3.2.0-4-486 uhci_hcd
[ 4.165749] usb usb1: SerialNumber: 0000:00:02.2
[ 4.181081] hub 1-0:1.0: USB hub found
[ 4.181132] hub 1-0:1.0: 2 ports detected
[ 4.192827] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.192853] ACPI: Thermal Zone [THRM] (36 C)
[ 4.193497] ACPI: Fan [FANH] (off)
[ 4.193910] ACPI: Fan [FANM] (off)
[ 4.194321] ACPI: Fan [FANL] (off)
[ 4.214706] Floppy drive(s): fd0 is 1.44M
[ 4.231660] FDC 0 is a National Semiconductor PC87306
[ 4.337599] libata version 3.00 loaded.
[ 4.344518] ata_piix 0000:00:02.1: version 2.13
[ 4.363053] scsi0 : ata_piix
[ 4.371102] scsi1 : ata_piix
[ 4.372837] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc90 irq 14
[ 4.372865] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xfc98 irq 15
[ 4.536812] ata2.00: ATAPI: CRN-8241B, 1.22a, max MWDMA2
[ 4.552417] ata2.00: configured for MWDMA2
[ 5.221389] ata1.00: ATA-5: IBM-DJSA-220, JS4OAB1A, max UDMA/66
[ 5.221420] ata1.00: 39070080 sectors, multi 16: LBA
[ 5.264068] ata1.00: configured for UDMA/33
[ 5.264837] scsi 0:0:0:0: Direct-Access ATA IBM-DJSA-220 JS4O PQ: 0 ANSI: 5
[ 5.267364] scsi 1:0:0:0: CD-ROM LG CD-ROM CRN-8241B 1.22 PQ: 0 ANSI: 5
[ 5.337884] sd 0:0:0:0: [sda] 39070080 512-byte logical blocks: (20.0 GB/18.6 GiB)
[ 5.338421] sd 0:0:0:0: [sda] Write Protect is off
[ 5.338449] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.338682] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.342749] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 5.342777] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.345824] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.737137] sda: sda1 sda2 sda3
[ 5.740981] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.781879] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.785771] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.757636] PM: Starting manual resume from disk
[ 6.757670] PM: Hibernation image partition 8:3 present
[ 6.757685] PM: Looking for hibernation image.
[ 6.758678] PM: Image not found (code -22)
[ 6.758696] PM: Hibernation image not present or could not be loaded.
[ 6.854799] kjournald starting. Commit interval 5 seconds
[ 6.854899] EXT3-fs (sda2): mounted filesystem with ordered data mode
[ 11.264602] udevd[298]: starting version 175
[ 12.414922] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 12.414974] ACPI: Sleep Button [SLPB]
[ 12.415491] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 12.456383] ACPI: Lid Switch [LID]
[ 12.457337] ACPI: AC Adapter [AC] (on-line)
[ 12.464779] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 12.464825] ACPI: Power Button [PWRF]
[ 12.663413] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input4
[ 12.663467] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 12.973794] ACPI: Battery Slot [BAT1] (battery present)
[ 12.974236] ACPI: Battery Slot [BAT2] (battery absent)
[ 12.982905] parport_pc 00:0b: reported by Plug and Play ACPI
[ 12.982984] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 13.092803] NET: Registered protocol family 23
[ 13.395167] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 13.590088] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.763591] nsc-ircc, Found chip at base=0x02e
[ 13.763642] nsc-ircc, driver loaded (Dag Brattli)
[ 13.763710] nsc_ircc_open(), can't get iobase of 0x2f8
[ 13.804511] piix4_smbus 0000:00:02.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
[ 13.804653] piix4_smbus: probe of 0000:00:02.3 failed with error -1
[ 13.895077] nsc-ircc 00:0a: disabled
[ 13.926281] yenta_cardbus 0000:00:03.0: CardBus bridge found [1014:0138]
[ 13.926336] yenta_cardbus 0000:00:03.0: Enabling burst memory read transactions
[ 13.926364] yenta_cardbus 0000:00:03.0: Using CSCINT to route CSC interrupts to PCI
[ 13.926386] yenta_cardbus 0000:00:03.0: Routing CardBus interrupts to PCI
[ 13.926413] yenta_cardbus 0000:00:03.0: TI: mfunc 0x00002000, devctl 0x64
[ 14.156678] yenta_cardbus 0000:00:03.0: ISA IRQ mask 0x0438, PCI irq 11
[ 14.156707] yenta_cardbus 0000:00:03.0: Socket status: 30000020
[ 14.188827] yenta_cardbus 0000:00:03.1: CardBus bridge found [1014:0138]
[ 14.188883] yenta_cardbus 0000:00:03.1: Using CSCINT to route CSC interrupts to PCI
[ 14.188906] yenta_cardbus 0000:00:03.1: Routing CardBus interrupts to PCI
[ 14.188934] yenta_cardbus 0000:00:03.1: TI: mfunc 0x00002000, devctl 0x64
[ 14.362099] psmouse serio1: hgpk: ID: 00 00 3c
[ 14.420920] yenta_cardbus 0000:00:03.1: ISA IRQ mask 0x0438, PCI irq 11
[ 14.420948] yenta_cardbus 0000:00:03.1: Socket status: 30000006
[ 14.448897] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377
[ 14.450759] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3e8-0x3ff 0x4d0-0x4d7
[ 14.452805] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 14.453434] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 14.454072] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcbfff 0xe8000-0xfffff
[ 14.454299] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 14.454521] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 14.454742] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 14.532721] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377
[ 14.534418] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x3e8-0x3ff 0x4d0-0x4d7
[ 14.535127] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 14.535741] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 14.537876] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcbfff 0xe8000-0xfffff
[ 14.538107] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 14.538329] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 14.538551] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 15.072128] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 15.072224] pci 0000:02:00.0: [1033:0035] type 0 class 0x000c03
[ 15.072291] pci 0000:02:00.0: reg 10: [mem 0x00000000-0x00000fff]
[ 15.072507] pci 0000:02:00.0: supports D1 D2
[ 15.072531] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[ 15.072633] pci 0000:02:00.1: [1033:0035] type 0 class 0x000c03
[ 15.072689] pci 0000:02:00.1: reg 10: [mem 0x00000000-0x00000fff]
[ 15.072859] pci 0000:02:00.1: supports D1 D2
[ 15.072880] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot
[ 15.072962] pci 0000:02:00.2: [1033:00e0] type 0 class 0x000c03
[ 15.073017] pci 0000:02:00.2: reg 10: [mem 0x00000000-0x000000ff]
[ 15.073184] pci 0000:02:00.2: supports D1 D2
[ 15.073205] pci 0000:02:00.2: PME# supported from D0 D1 D2 D3hot
[ 15.073287] pci 0000:02:00.0: BAR 0: assigned [mem 0x1c000000-0x1c000fff]
[ 15.073324] pci 0000:02:00.1: BAR 0: assigned [mem 0x1c001000-0x1c001fff]
[ 15.073357] pci 0000:02:00.2: BAR 0: assigned [mem 0x1c002000-0x1c0020ff]
[ 15.078091] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 15.085809] ehci_hcd 0000:02:00.2: enabling device (0000 -> 0002)
[ 15.085943] ehci_hcd 0000:02:00.2: EHCI Host Controller
[ 15.086063] ehci_hcd 0000:02:00.2: new USB bus registered, assigned bus number 2
[ 15.109207] ehci_hcd 0000:02:00.2: irq 11, io mem 0x1c002000
[ 15.120171] ehci_hcd 0000:02:00.2: USB 2.0 started, EHCI 1.00
[ 15.120375] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 15.120402] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.120425] usb usb2: Product: EHCI Host Controller
[ 15.120445] usb usb2: Manufacturer: Linux 3.2.0-4-486 ehci_hcd
[ 15.120465] usb usb2: SerialNumber: 0000:02:00.2
[ 15.121540] hub 2-0:1.0: USB hub found
[ 15.121586] hub 2-0:1.0: 5 ports detected
[ 15.397904] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 15.398089] ohci_hcd 0000:02:00.0: enabling device (0000 -> 0002)
[ 15.398227] ohci_hcd 0000:02:00.0: setting latency timer to 64
[ 15.398251] ohci_hcd 0000:02:00.0: OHCI Host Controller
[ 15.398343] ohci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[ 15.398480] ohci_hcd 0000:02:00.0: irq 11, io mem 0x1c000000
[ 15.432324] usb 2-2: new high-speed USB device number 2 using ehci_hcd
[ 15.489187] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 15.489218] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.489242] usb usb3: Product: OHCI Host Controller
[ 15.489262] usb usb3: Manufacturer: Linux 3.2.0-4-486 ohci_hcd
[ 15.489282] usb usb3: SerialNumber: 0000:02:00.0
[ 15.491074] hub 3-0:1.0: USB hub found
[ 15.491128] hub 3-0:1.0: 3 ports detected
[ 15.491691] ohci_hcd 0000:02:00.1: enabling device (0000 -> 0002)
[ 15.491843] ohci_hcd 0000:02:00.1: setting latency timer to 64
[ 15.491869] ohci_hcd 0000:02:00.1: OHCI Host Controller
[ 15.491945] ohci_hcd 0000:02:00.1: new USB bus registered, assigned bus number 4
[ 15.492197] ohci_hcd 0000:02:00.1: irq 11, io mem 0x1c001000
[ 15.579839] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 15.579871] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 15.579895] usb usb4: Product: OHCI Host Controller
[ 15.579914] usb usb4: Manufacturer: Linux 3.2.0-4-486 ohci_hcd
[ 15.579934] usb usb4: SerialNumber: 0000:02:00.1
[ 15.589098] hub 4-0:1.0: USB hub found
[ 15.589150] hub 4-0:1.0: 2 ports detected
[ 15.593651] usb 2-2: New USB device found, idVendor=1a40, idProduct=0101
[ 15.593682] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 15.593705] usb 2-2: Product: USB 2.0 Hub
[ 15.598374] hub 2-2:1.0: USB hub found
[ 15.598944] hub 2-2:1.0: 4 ports detected
[ 15.642687] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 15.642712] PCI: setting IRQ 5 as level-triggered
[ 15.756189] gameport gameport0: ES1938 is pci0000:00:07.0/gameport0, io 0xfc5c, speed 1084kHz
[ 15.936326] usb 2-2.1: new full-speed USB device number 3 using ehci_hcd
[ 16.029528] usb 2-2.1: config 1 has an invalid interface number: 3 but max is 2
[ 16.029563] usb 2-2.1: config 1 has 4 interfaces, different from the descriptor's value: 3
[ 16.030770] usb 2-2.1: New USB device found, idVendor=1004, idProduct=6000
[ 16.030798] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 16.030822] usb 2-2.1: Product: LG CDMA USB Modem
[ 16.030841] usb 2-2.1: Manufacturer: LG CDMA USB Modem
[ 16.128187] usb 2-2.2: new full-speed USB device number 4 using ehci_hcd
[ 16.221326] usb 2-2.2: New USB device found, idVendor=0fe6, idProduct=9700
[ 16.221358] usb 2-2.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 16.221381] usb 2-2.2: Product: USB 2.0 10/100M Ethernet Adaptor
[ 16.300341] usb 2-2.3: new high-speed USB device number 5 using ehci_hcd
[ 16.394550] usb 2-2.3: New USB device found, idVendor=7392, idProduct=7811
[ 16.394582] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 16.394605] usb 2-2.3: Product: 802.11n WLAN Adapter
[ 16.394625] usb 2-2.3: Manufacturer: Realtek
[ 16.394643] usb 2-2.3: SerialNumber: 00e04c000001
[ 16.677463] cdc_acm 2-2.1:1.0: ttyACM0: USB ACM device
[ 16.681717] usbcore: registered new interface driver cdc_acm
[ 16.681744] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 16.710849] usbcore: registered new interface driver usbserial
[ 16.711011] USB Serial support registered for generic
[ 16.713587] usbcore: registered new interface driver usbserial_generic
[ 16.713613] usbserial: USB Serial Driver core
[ 16.757642] USB Serial support registered for qcaux
[ 16.757779] qcaux 2-2.1:1.2: qcaux converter detected
[ 16.766669] usb 2-2.1: qcaux converter now attached to ttyUSB0
[ 16.766783] qcaux 2-2.1:1.3: qcaux converter detected
[ 16.772453] usb 2-2.1: qcaux converter now attached to ttyUSB1
[ 16.772619] usbcore: registered new interface driver qcaux
[ 17.195084] dm9601 2-2.2:1.0: eth0: register 'dm9601' at usb-0000:02:00.2-2.2, Davicom DM9601 USB Ethernet, 00:e0:4c:53:44:58
[ 17.197429] usbcore: registered new interface driver dm9601
[ 17.356321] usb 2-2.4: new full-speed USB device number 6 using ehci_hcd
[ 17.450618] usb 2-2.4: New USB device found, idVendor=0a5c, idProduct=4500
[ 17.450650] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 17.450674] usb 2-2.4: Product: BCM2046B1
[ 17.450692] usb 2-2.4: Manufacturer: Broadcom
[ 17.452597] hub 2-2.4:1.0: USB hub found
[ 17.453062] hub 2-2.4:1.0: 3 ports detected
[ 17.559183] cfg80211: Calling CRDA to update world regulatory domain
[ 17.738581] usb 2-2.4.1: new full-speed USB device number 7 using ehci_hcd
[ 17.847231] usb 2-2.4.1: New USB device found, idVendor=0a5c, idProduct=4502
[ 17.847264] usb 2-2.4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 17.928431] usb 2-2.4.2: new full-speed USB device number 8 using ehci_hcd
[ 18.023173] usb 2-2.4.2: New USB device found, idVendor=0a5c, idProduct=4503
[ 18.023205] usb 2-2.4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 18.064104] input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:03.0/0000:02:00.2/usb2/2-2/2-2.4/2-2.4.1/2-2.4.1:1.0/input/input7
[ 18.065811] generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:02:00.2-2.4.1/input0
[ 18.079127] input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:03.0/0000:02:00.2/usb2/2-2/2-2.4/2-2.4.2/2-2.4.2:1.0/input/input8
[ 18.081402] generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:02:00.2-2.4.2/input0
[ 18.083382] usbcore: registered new interface driver usbhid
[ 18.083406] usbhid: USB HID core driver
[ 18.104642] usb 2-2.4.3: new full-speed USB device number 9 using ehci_hcd
[ 18.208747] usb 2-2.4.3: New USB device found, idVendor=0461, idProduct=4d75
[ 18.208781] usb 2-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 18.208908] usb 2-2.4.3: Product: Rocketfish Bluetooth Adapter
[ 18.208932] usb 2-2.4.3: Manufacturer: Broadcom Corp
[ 18.208952] usb 2-2.4.3: SerialNumber: 0002762A9C1F
[ 18.834795] Bluetooth: Core ver 2.16
[ 18.834966] NET: Registered protocol family 31
[ 18.834986] Bluetooth: HCI device and connection manager initialized
[ 18.835013] Bluetooth: HCI socket layer initialized
[ 18.835031] Bluetooth: L2CAP socket layer initialized
[ 18.837583] Bluetooth: SCO socket layer initialized
[ 18.889110] rtl8192cu: MAC address: 80:1f:02:51:fd:df
[ 18.889155] rtl8192cu: Board Type 0
[ 18.900383] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 18.910769] usbcore: registered new interface driver btusb
[ 19.160954] usb 2-2.3: firmware: agent loaded rtlwifi/rtl8192cufw.bin into memory
[ 19.162969] rtlwifi: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 19.257141] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 19.267482] usbcore: registered new interface driver rtl8192cu
[ 22.174263] Adding 588796k swap on /dev/sda3. Priority:-1 extents:1 across:588796k
[ 23.296236] EXT3-fs (sda2): using internal journal
[ 23.741009] loop: module loaded
[ 32.506972] RPC: Registered named UNIX socket transport module.
[ 32.506998] RPC: Registered udp transport module.
[ 32.507014] RPC: Registered tcp transport module.
[ 32.507030] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 32.689791] FS-Cache: Loaded
[ 32.858983] FS-Cache: Netfs 'nfs' registered for caching
[ 32.947659] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 35.371599] ttyS1: LSR safety check engaged!
[ 35.377924] ttyS1: LSR safety check engaged!
[ 41.365963] Bluetooth: RFCOMM TTY layer initialized
[ 41.366007] Bluetooth: RFCOMM socket layer initialized
[ 41.366026] Bluetooth: RFCOMM ver 1.11
[ 41.464391] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 41.464418] Bluetooth: BNEP filters: protocol multicast
[ 42.068344] lp0: using parport0 (interrupt-driven).
[ 42.113487] ppdev: user-space parallel port driver
[ 49.581733] dm9601 2-2.2:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xFFFF
[ 49.665927] rtl8192cu: MAC auto ON okay!
[ 49.738163] rtl8192cu: Tx queue select: 0x05
[ 49.741680] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cufw.bin
[ 50.501475] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 55.364638] wlan0: authenticate with a8:39:44:26:41:84 (try 1)
[ 55.369518] wlan0: authenticated
[ 55.425737] wlan0: associate with a8:39:44:26:41:84 (try 1)
[ 55.429304] wlan0: RX AssocResp from a8:39:44:26:41:84 (capab=0x411 status=0 aid=6)
[ 55.429335] wlan0: associated
[ 55.447865] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 362.294958] UDF-fs: warning (device sr0): udf_load_vrs: No VRS found
[ 362.294991] UDF-fs: warning (device sr0): udf_fill_super: No partition found (1)
[ 362.326449] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 362.408967] ISOFS: changing to secondary root
[ 1314.409206] cfg80211: Calling CRDA for country: US
[ 1315.343291] wlan0: authenticate with a8:39:44:26:41:84 (try 1)
[ 1315.345249] wlan0: authenticated
[ 1315.357766] wlan0: associate with a8:39:44:26:41:84 (try 1)
[ 1315.361412] wlan0: RX ReassocResp from a8:39:44:26:41:84 (capab=0x411 status=0 aid=6)
[ 1315.361445] wlan0: associated
[ 1508.973753] wlan0: deauthenticating from a8:39:44:26:41:84 by local choice (reason=3)
[ 1508.975336] cfg80211: Calling CRDA to update world regulatory domain
[ 1510.419020] wlan0: authenticate with a8:39:44:26:41:84 (try 1)
[ 1510.421136] wlan0: authenticated
[ 1510.423802] wlan0: associate with a8:39:44:26:41:84 (try 1)
[ 1510.427305] wlan0: RX ReassocResp from a8:39:44:26:41:84 (capab=0x411 status=0 aid=6)
[ 1510.427334] wlan0: associated
[ 1520.283010] wlan0: deauthenticating from a8:39:44:26:41:84 by local choice (reason=3)
[ 1520.284540] cfg80211: Calling CRDA to update world regulatory domain
[ 2113.504079] ipv6_create_tempaddr(): use_tempaddr is disabled.
[ 2145.958575] wlan0: authenticate with a8:39:44:26:41:84 (try 1)
[ 2145.961092] wlan0: authenticated
[ 2145.963266] wlan0: associate with a8:39:44:26:41:84 (try 1)
[ 2145.966889] wlan0: RX ReassocResp from a8:39:44:26:41:84 (capab=0x411 status=0 aid=6)
[ 2145.966920] wlan0: associated
noalternative@390e:~$