I followed some suggestions and build a Kernel 5 and downloaded the firmware from the Intel site
https://www.intel.com/content/www/us/en ... eless.html
and put it at
Code: Select all
/lib/firmware
Some time later I upgrade my system to the Debian 11 and then I could use the native kernel
Code: Select all
# uname -a
Linux ry7 5.11.15 #2 SMP Sun May 30 01:17:29 -03 2021 x86_64 GNU/Linux
However today when a boot the Debian the wifi had stopped working.
I tried
Code: Select all
uname -a
Linux ry7 5.11.15 #2 SMP Sun May 30 01:17:29 -03 2021 x86_64 GNU/Linux
root@ry7:~# modprobe -r iwlwifi
modprobe: FATAL: Module iwlwifi is in use.
root@ry7:~# modprobe -r iwlmvm iwlwifi
root@ry7:~# modprobe iwlwifi
root@ry7:~# tail -f /var/log/messages
Jun 5 15:14:54 ry7 kernel: [ 1105.936918] iwlwifi 0000:04:00.0: loaded firmware version 46.3cfab8da.0 cc-a0-46.ucode op_mode iwlmvm
Jun 5 15:14:54 ry7 kernel: [ 1105.962349] iwlwifi 0000:04:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340
Jun 5 15:46:11 ry7 kernel: [ 2982.401580] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Jun 5 15:46:11 ry7 kernel: [ 2982.401717] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Jun 5 15:46:11 ry7 kernel: [ 2982.401959] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
Jun 5 15:46:11 ry7 kernel: [ 2982.407104] Intel(R) Wireless WiFi driver for Linux
Jun 5 15:46:11 ry7 kernel: [ 2982.408139] iwlwifi 0000:04:00.0: api flags index 2 larger than supported by driver
Jun 5 15:46:11 ry7 kernel: [ 2982.408146] iwlwifi 0000:04:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.22
Jun 5 15:46:11 ry7 kernel: [ 2982.408338] iwlwifi 0000:04:00.0: loaded firmware version 59.601f3a66.0 cc-a0-59.ucode op_mode iwlmvm
Jun 5 15:46:11 ry7 kernel: [ 2982.433420] iwlwifi 0000:04:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340
Code: Select all
iw list
root@ry7:~#
ifconfig -a
enp5s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 3c:7c:3f:1d:f2:8a txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
enp6s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.3 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::3e7c:3fff:fe1d:f289 prefixlen 64 scopeid 0x20<link>
ether 3c:7c:3f:1d:f2:89 txqueuelen 1000 (Ethernet)
RX packets 100173 bytes 134842660 (128.5 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 52662 bytes 5303114 (5.0 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device memory 0xfc600000-fc61ffff
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 35 bytes 3121 (3.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 35 bytes 3121 (3.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
I cannot start my wifi anymore.
Just as a note, I believe that before the module iwlmvm does not need to be loaded.