No issue with connection, i can connect (from Thunderbird) to my mail server but can't send or receive any message
I try a lot of differents settings...
Check every log but no utile informations
Here is my syslog
Code: Select all
Aug 28 11:50:13 webmail postfix/proxymap[2692]: name_mask: all
Aug 28 11:50:13 webmail postfix/proxymap[2692]: inet_addr_local: configured 3 IPv4 addresses
Aug 28 11:50:13 webmail postfix/proxymap[2692]: inet_addr_local: configured 2 IPv6 addresses
Aug 28 11:50:13 webmail postfix/proxymap[2692]: process generation: 13 (13)
Aug 28 11:50:13 webmail postfix/proxymap[2692]: whitelisting mysql:/etc/postfix/mysql-virtual-alias-maps.cf from proxy_read_maps
Aug 28 11:50:13 webmail postfix/proxymap[2692]: whitelisting mysql:/etc/postfix/mysql-virtual-email2email.cf from proxy_read_maps
Aug 28 11:50:13 webmail postfix/proxymap[2692]: whitelisting mysql:/etc/postfix/mysql-virtual-mailbox-maps.cf from proxy_read_maps
Aug 28 11:50:13 webmail postfix/proxymap[2692]: whitelisting mysql:/etc/postfix/mysql-virtual-mailbox-domains.cf from proxy_read_maps
Aug 28 11:50:13 webmail postfix/smtpd[2648]: warning: private/proxymap socket: service dict_proxy_open: Connection reset by peer
Aug 28 11:50:13 webmail postfix/smtpd[2648]: proxymap stream disconnect
Aug 28 11:50:13 webmail postfix/master[2639]: warning: process /usr/lib/postfix/sbin/proxymap pid 2692 killed by signal 11
Aug 28 11:50:13 webmail postfix/master[2639]: warning: /usr/lib/postfix/sbin/proxymap: bad command startup -- throttling
Aug 28 11:50:14 webmail postfix/smtpd[2648]: connect to subsystem private/proxymap
Aug 28 11:50:14 webmail postfix/smtpd[2648]: send attr request = open
Aug 28 11:50:14 webmail postfix/smtpd[2648]: send attr table = mysql:/etc/postfix/mysql-virtual-alias-maps.cf
Aug 28 11:50:14 webmail postfix/smtpd[2648]: send attr flags = 0
`/usr/sbin/sendmail -bv test@yopmail.com`
here is my postfix main.cf conf
Code: Select all
# See /usr/share/postfix/main.cf.dist for a commented, more complete version
# Debian specific: Specifying a file name will cause the first
# line of that file to be used as the name. The Debian default
# is /etc/mailname.
#myorigin = /etc/mailname
smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu)
biff = no
# appending .domain is the MUA's job.
append_dot_mydomain = no
# Uncomment the next line to generate "delayed mail" warnings
#delay_warning_time = 4h
readme_directory = no
# See http://www.postfix.org/COMPATIBILITY_README.html -- default to 2 on
# fresh installs.
compatibility_level = 2
# TLS parameters
smtpd_tls_cert_file=/etc/letsencrypt/live/webmail.bellamagus.fr/fullchain.pem
smtpd_tls_key_file=/etc/letsencrypt/live/webmail.bellamagus.fr/privkey.pem
smtpd_use_tls=yes
smtpd_tls_auth_only = yes
smtp_tls_security_level = may
smtpd_tls_security_level = may
smtpd_sasl_security_options = noanonymous, noplaintext
smtpd_sasl_tls_security_options = noanonymous
# Authentication
smtpd_sasl_type = dovecot
smtpd_sasl_path = private/auth
smtpd_sasl_auth_enable = yes
# See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
# information on enabling SSL in the smtp client.
# Restrictions
smtpd_helo_restrictions =
permit_mynetworks,
permit_sasl_authenticated,
reject_invalid_helo_hostname,
reject_non_fqdn_helo_hostname
smtpd_recipient_restrictions =
permit_mynetworks,
permit_sasl_authenticated,
reject_non_fqdn_recipient,
reject_unknown_recipient_domain,
reject_unlisted_recipient,
reject_unauth_destination
smtpd_sender_restrictions =
permit_mynetworks,
permit_sasl_authenticated,
reject_non_fqdn_sender,
reject_unknown_sender_domain
smtpd_relay_restrictions =
permit_mynetworks,
permit_sasl_authenticated,
defer_unauth_destination
# See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
# information on enabling SSL in the smtp client.
myhostname = webmail.bellamagus.fr
alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases
mydomain =bellamagus.fr
myorigin = $mydomain
mydestination = localhost
relayhost =
mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
mailbox_size_limit = 0
recipient_delimiter = +
inet_interfaces = all
inet_protocols = all
local_recipient_maps =
# Handing off local delivery to Dovecot's LMTP, and telling it where to store mail
virtual_transport = lmtp:unix:private/dovecot-lmtp
# Virtual domains, users, and aliases
virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual-mailbox-domains.cf
virtual_mailbox_base = /home/vmail
virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual-mailbox-maps.cf
virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual-alias-maps.cf,
proxy:mysql:/etc/postfix/mysql-virtual-email2email.cf
virtual_minimum_uid=100
virtual_uid_maps = static:5000
virtual_gid_maps = static:5000
# Even more Restrictions and MTA params
disable_vrfy_command = yes
strict_rfc821_envelopes = yes
#smtpd_etrn_restrictions = reject
#smtpd_reject_unlisted_sender = yes
#smtpd_reject_unlisted_recipient = yes
smtpd_delay_reject = yes
smtpd_helo_required = yes
smtp_always_send_ehlo = yes
#smtpd_hard_error_limit = 1
smtpd_timeout = 30s
smtp_helo_timeout = 15s
smtp_rcpt_timeout = 15s
smtpd_recipient_limit = 40
minimal_backoff_time = 180s
maximal_backoff_time = 3h
# Reply Rejection Codes
invalid_hostname_reject_code = 550
non_fqdn_reject_code = 550
unknown_address_reject_code = 550
unknown_client_reject_code = 550
unknown_hostname_reject_code = 550
unverified_recipient_reject_code = 550
unverified_sender_reject_code = 550
home_mailbox = /home/vmail
And my master.cf
Code: Select all
#
# Postfix master process configuration file. For details on the format
# of the file, see the master(5) manual page (command: "man 5 master" or
# on-line: http://www.postfix.org/master.5.html).
#
# Do not forget to execute "postfix reload" after editing this file.
#
# ==========================================================================
# service type private unpriv chroot wakeup maxproc command + args
# (yes) (yes) (no) (never) (100)
# ==========================================================================
smtp inet n - y - - smtpd
#smtp inet n - y - 1 postscreen
#smtpd pass - - y - - smtpd
#dnsblog unix - - y - 0 dnsblog
#tlsproxy unix - - y - 0 tlsproxy
#submission inet n - y - - smtpd
# -o syslog_name=postfix/submission
# -o smtpd_tls_security_level=encrypt
# -o smtpd_sasl_auth_enable=yes
# -o smtpd_tls_auth_only=yes
# -o smtpd_reject_unlisted_recipient=no
# -o smtpd_client_restrictions=$mua_client_restrictions
# -o smtpd_helo_restrictions=$mua_helo_restrictions
# -o smtpd_sender_restrictions=$mua_sender_restrictions
# -o smtpd_recipient_restrictions=
# -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
# -o milter_macro_daemon_name=ORIGINATING
#smtps inet n - y - - smtpd
# -o syslog_name=postfix/smtps
# -o smtpd_tls_wrappermode=yes
# -o smtpd_sasl_auth_enable=yes
# -o smtpd_reject_unlisted_recipient=no
# -o smtpd_client_restrictions=$mua_client_restrictions
# -o smtpd_helo_restrictions=$mua_helo_restrictions
# -o smtpd_sender_restrictions=$mua_sender_restrictions
# -o smtpd_recipient_restrictions=
# -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
# -o milter_macro_daemon_name=ORIGINATING
#628 inet n - y - - qmqpd
pickup unix n - y 60 1 pickup
cleanup unix n - y - 0 cleanup
qmgr unix n - n 300 1 qmgr
#qmgr unix n - n 300 1 oqmgr
tlsmgr unix - - y 1000? 1 tlsmgr
rewrite unix - - y - - trivial-rewrite
bounce unix - - y - 0 bounce
defer unix - - y - 0 bounce
trace unix - - y - 0 bounce
verify unix - - y - 1 verify
flush unix n - y 1000? 0 flush
proxymap unix - - n - - proxymap
proxywrite unix - - n - 1 proxymap
smtp unix - - y - - smtp
relay unix - - y - - smtp
-o syslog_name=postfix/$service_name
# -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq unix n - y - - showq
error unix - - y - - error
retry unix - - y - - error
discard unix - - y - - discard
local unix - n n - - local
virtual unix - n n - - virtual
lmtp unix - - y - - lmtp
anvil unix - - y - 1 anvil
scache unix - - y - 1 scache
postlog unix-dgram n - n - 1 postlogd
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent. See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop unix - n n - - pipe
flags=DRXhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
#
# ====================================================================
#
# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
#
# Specify in cyrus.conf:
# lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
#
# Specify in main.cf one or more of the following:
# mailbox_transport = lmtp:inet:localhost
# virtual_transport = lmtp:inet:localhost
#
# ====================================================================
#
# Cyrus 2.1.5 (Amos Gouaux)
# Also specify in main.cf: cyrus_destination_recipient_limit=1
#
#cyrus unix - n n - - pipe
# flags=DRX user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
#
# ====================================================================
# Old example of delivery via Cyrus.
#
#old-cyrus unix - n n - - pipe
# flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
#
# ====================================================================
#
# See the Postfix UUCP_README file for configuration details.
#
uucp unix - n n - - pipe
flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# Other external delivery methods.
#
ifmail unix - n n - - pipe
flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp unix - n n - - pipe
flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
scalemail-backend unix - n n - 2 pipe
flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
mailman unix - n n - - pipe
flags=FRX user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user}
When i execute : telnet 127.0.0.1 25
Code: Select all
Trying 127.0.0.1...
Connected to 127.0.0.1.
Escape character is '^]'.
and when i ehlo mydomain it doesn't answers anything
But postfix seems to listen as
ss -tlnp
Code: Select all
State Recv-Q Send-Q Local Address:Port Peer Address:Port Process
LISTEN 70 100 0.0.0.0:25 0.0.0.0:* users:(("smtpd",pid=28386,fd=6),("master",pid=28382,fd=13))
LISTEN 0 100 [::]:25 [::]:* users:(("smtpd",pid=28386,fd=7),("master",pid=28382,fd=14))
Then when i try a postqueue -p
i got this : (with debug)
Code: Select all
Aug 28 11:47:29 webmail postfix/showq[2676]: name_mask: all
Aug 28 11:47:29 webmail postfix/showq[2676]: inet_addr_local: configured 3 IPv4 addresses
Aug 28 11:47:29 webmail postfix/showq[2676]: inet_addr_local: configured 2 IPv6 addresses
Aug 28 11:47:29 webmail postfix/showq[2676]: process generation: 6 (6)
Aug 28 11:47:29 webmail postfix/postqueue[2675]: fatal: malformed showq server response