[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-17) (
dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Sun Jun 21 04:47:08 UTC 2009
[ 0.000000] Command line: root=/dev/sda1 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f590000 (usable)
[ 0.000000] BIOS-e820: 000000003f590000 - 000000003f5e0000 (reserved)
[ 0.000000] BIOS-e820: 000000003f5e0000 - 000000003f5e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f5e3000 - 000000003f5f0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f5f0000 - 000000003f600000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 259472) 1 entries of 3200 used
[ 0.000000] max_pfn_mapped = 1048576
[ 0.000000] init_memory_mapping
[ 0.000000] DMI 2.5 present.
[ 0.000000] ACPI: RSDP 000F7A90, 0014 (r0 HPQOEM)
[ 0.000000] ACPI: RSDT 3F5E3000, 003C (r1 HPQOEM SLIC-BPC 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 3F5E3080, 0074 (r1 HPQOEM SLIC-BPC 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 3F5E3100, 4909 (r1 HPQOEM AWRDACPI 1000 MSFT 3000000)
[ 0.000000] ACPI: FACS 3F5E0000, 0040
[ 0.000000] ACPI: _SLC 3F5E7B00, 0176 (r1 HPQOEM SLIC-BPC 42302E31 AWRD 1010101)
[ 0.000000] ACPI: HPET 3F5E7C80, 0038 (r1 HPQOEM SLIC-BPC 42302E31 AWRD 98)
[ 0.000000] ACPI: MCFG 3F5E7CC0, 003C (r1 HPQOEM SLIC-BPC 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 3F5E7A40, 0084 (r1 HPQOEM SLIC-BPC 42302E31 AWRD 0)
[ 0.000000] ACPI: SSDT 3F5E8360, 03A8 (r1 PmRef CpuPm 3000 INTL 20040311)
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003f590000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 259472) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003f590000
[ 0.000000] NODE_DATA [000000000000b000 - 000000000000ffff]
[ 0.000000] bootmap [0000000000010000 - 0000000000017eb7] pages 8
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
[ 0.000000] early res: 2 [200000-673397] TEXT DATA BSS
[ 0.000000] early res: 3 [37993000-37fef542] RAMDISK
[ 0.000000] early res: 4 [9f000-fffff] BIOS reserved
[ 0.000000] early res: 5 [8000-afff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff810001200000-ffff810001ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 259472
[ 0.000000] On node 0 totalpages: 259375
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1244 pages reserved
[ 0.000000] DMA zone: 2699 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3492 pages used for memmap
[ 0.000000] DMA32 zone: 251884 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f600000:a0a00000)
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 254583
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda1 ro quiet
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] time.c: Detected 2499.969 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] Memory: 1011760k/1037888k available (2225k kernel code, 25740k reserved, 1080k data, 392k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.083876] Calibrating delay using timer specific routine.. 5005.01 BogoMIPS (lpj=10010027)
[ 0.083913] Security Framework initialized
[ 0.083919] SELinux: Disabled at boot.
[ 0.083922] Capability LSM initialized
[ 0.084005] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.084005] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.084005] Mount-cache hash table entries: 256
[ 0.084005] Initializing cgroup subsys ns
[ 0.084005] Initializing cgroup subsys cpuacct
[ 0.084005] Initializing cgroup subsys devices
[ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.084005] CPU: L2 cache: 2048K
[ 0.084005] CPU 0/0 -> Node 0
[ 0.084005] CPU: Physical Processor ID: 0
[ 0.084005] CPU: Processor Core ID: 0
[ 0.084005] CPU0: Thermal monitoring enabled (TM2)
[ 0.084005] using mwait in idle threads.
[ 0.084005] ACPI: Core revision 20080321
[ 0.132433] CPU0: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06
[ 0.132437] Using local APIC timer interrupts.
[ 0.140008] APIC timer calibration result 12499845
[ 0.140008] Detected 12.499 MHz APIC timer.
[ 0.140008] Booting processor 1/1 ip 6000
[ 0.148009] Initializing CPU#1
[ 0.148009] Calibrating delay using timer specific routine.. 4999.95 BogoMIPS (lpj=9999913)
[ 0.148009] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.148009] CPU: L2 cache: 2048K
[ 0.148009] CPU 1/1 -> Node 0
[ 0.148009] CPU: Physical Processor ID: 0
[ 0.148009] CPU: Processor Core ID: 1
[ 0.148009] CPU1: Thermal monitoring enabled (TM2)
[ 0.228014] CPU1: Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06
[ 0.228014] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.232014] Brought up 2 CPUs
[ 0.232014] Total of 2 processors activated (10004.97 BogoMIPS).
[ 0.232014] CPU0 attaching sched-domain:
[ 0.232014] domain 0: span 0-1
[ 0.232014] groups: 0 1
[ 0.232014] domain 1: span 0-1
[ 0.232014] groups: 0-1
[ 0.232014] CPU1 attaching sched-domain:
[ 0.232014] domain 0: span 0-1
[ 0.232014] groups: 1 0
[ 0.232014] domain 1: span 0-1
[ 0.232014] groups: 0-1
[ 0.232014] net_namespace: 1224 bytes
[ 0.232014] Booting paravirtualized kernel on bare hardware
[ 0.232014] NET: Registered protocol family 16
[ 0.232014] ACPI: bus type pci registered
[ 0.232014] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.232014] PCI: MCFG area at e0000000 reserved in E820
[ 0.240015] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.240015] PCI: Using configuration type 1 for base access
[ 0.244015] ACPI: EC: Look up EC in DSDT
[ 0.248015] ACPI: Interpreter enabled
[ 0.248015] ACPI: (supports S0 S3 S4 S5)
[ 0.248015] ACPI: Using IOAPIC for interrupt routing
[ 0.252015] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.252875] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.252878] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.256389] PCI: Transparent bridge - 0000:00:1e.0
[ 0.256419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.256703] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.256797] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.256896] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.271092] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.271092] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.271092] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.271092] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.271092] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.271092] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.271189] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.271283] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.275093] ACPI Warning (tbutils-0217): Incorrect checksum in table [_SLC] - 03, should be ED [20080321]
[ 0.275093] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.275093] pnp: PnP ACPI init
[ 0.275093] ACPI: bus type pnp registered
[ 0.275093] pnp 00:00: parse allocated resources
[ 0.275093] pnp 00:00: add io 0xcf8-0xcff flags 0x1
[ 0.275093] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.275093] pnp 00:01: parse allocated resources
[ 0.275093] pnp 00:01: add io 0x10-0x1f flags 0x1
[ 0.275093] pnp 00:01: add io 0x22-0x3f flags 0x1
[ 0.275093] pnp 00:01: add io 0x44-0x5f flags 0x1
[ 0.275093] pnp 00:01: add io 0x62-0x63 flags 0x1
[ 0.275093] pnp 00:01: add io 0x65-0x6f flags 0x1
[ 0.275093] pnp 00:01: add io 0x74-0x7f flags 0x1
[ 0.275093] pnp 00:01: add io 0x91-0x93 flags 0x1
[ 0.275093] pnp 00:01: add io 0xa2-0xbf flags 0x1
[ 0.275093] pnp 00:01: add io 0xe0-0xef flags 0x1
[ 0.275093] pnp 00:01: add io 0x4d0-0x4d1 flags 0x1
[ 0.275093] pnp 00:01: add io 0x800-0x87f flags 0x1
[ 0.275093] pnp 00:01: add io 0x290-0x297 flags 0x1
[ 0.275093] pnp 00:01: add io 0x880-0x88f flags 0x1
[ 0.275093] pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.275093] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.275093] pnp 00:02: parse allocated resources
[ 0.275093] pnp 00:02: add dma 4 flags 0x4
[ 0.275093] pnp 00:02: add io 0x0-0xf flags 0x1
[ 0.275093] pnp 00:02: add io 0x80-0x90 flags 0x1
[ 0.275093] pnp 00:02: add io 0x94-0x9f flags 0x1
[ 0.275093] pnp 00:02: add io 0xc0-0xdf flags 0x1
[ 0.275093] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.275093] pnp 00:03: parse allocated resources
[ 0.275093] pnp 00:03: add irq 8 flags 0x1
[ 0.275093] pnp 00:03: add mem 0xfed00000-0xfed003ff flags 0x1
[ 0.275093] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.275093] pnp 00:04: parse allocated resources
[ 0.275093] pnp 00:04: add io 0x70-0x73 flags 0x1
[ 0.275093] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.275093] pnp 00:05: parse allocated resources
[ 0.275093] pnp 00:05: add io 0x61-0x61 flags 0x1
[ 0.275093] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.275093] pnp 00:06: parse allocated resources
[ 0.275093] pnp 00:06: add io 0xf0-0xff flags 0x1
[ 0.275093] pnp 00:06: add irq 13 flags 0x1
[ 0.275093] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.275093] pnp 00:07: parse allocated resources
[ 0.275093] pnp 00:07: add io 0x3f8-0x3ff flags 0x1
[ 0.275093] pnp 00:07: add irq 4 flags 0x1
[ 0.275093] pnp 00:07: parse resource options
[ 0.275093] pnp 00:07: new independent option
[ 0.275093] pnp 00:07: new dependent option (priority 0x1)
[ 0.275093] pnp 00:07: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1
[ 0.275093] pnp 00:07: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.275093] pnp 00:07: new dependent option (priority 0x1)
[ 0.275093] pnp 00:07: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1
[ 0.275093] pnp 00:07: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.275093] pnp 00:07: new dependent option (priority 0x1)
[ 0.275093] pnp 00:07: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1
[ 0.275093] pnp 00:07: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.275093] pnp 00:07: new dependent option (priority 0x1)
[ 0.275093] pnp 00:07: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1
[ 0.275093] pnp 00:07: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.275093] pnp 00:07: end dependent options
[ 0.275093] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.275093] pnp 00:08: parse allocated resources
[ 0.275093] pnp 00:08: add io 0x378-0x37f flags 0x1
[ 0.275093] pnp 00:08: add irq 7 flags 0x1
[ 0.275093] pnp 00:08: parse resource options
[ 0.275093] pnp 00:08: new independent option
[ 0.275093] pnp 00:08: new dependent option (priority 0x1)
[ 0.275093] pnp 00:08: io min 0x378 max 0x378 align 1 size 8 flags 0x1
[ 0.275093] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.275093] pnp 00:08: new dependent option (priority 0x1)
[ 0.275093] pnp 00:08: io min 0x278 max 0x278 align 1 size 8 flags 0x1
[ 0.275093] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.275093] pnp 00:08: new dependent option (priority 0x1)
[ 0.275093] pnp 00:08: io min 0x3bc max 0x3bc align 1 size 4 flags 0x1
[ 0.275093] pnp 00:08: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001eb8 flags 0x1
[ 0.275093] pnp 00:08: end dependent options
[ 0.275093] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.275093] pnp 00:09: parse allocated resources
[ 0.275093] pnp 00:09: add io 0x60-0x60 flags 0x1
[ 0.275093] pnp 00:09: add io 0x64-0x64 flags 0x1
[ 0.275093] pnp 00:09: add irq 12 flags 0x1
[ 0.275093] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.275093] pnp 00:0a: parse allocated resources
[ 0.275093] pnp 00:0a: add io 0x400-0x4bf flags 0x1
[ 0.275093] pnp 00:0a: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.275093] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.275093] pnp 00:0b: parse allocated resources
[ 0.275093] pnp 00:0b: add mem 0xffb80000-0xffbfffff flags 0x1
[ 0.275093] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.275093] pnp 00:0c: parse allocated resources
[ 0.275093] pnp 00:0c: add mem 0xe0000000-0xefffffff flags 0x1
[ 0.275093] pnp 00:0c: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.275093] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.275093] pnp 00:0d: parse allocated resources
[ 0.275093] pnp 00:0d: add mem 0xf0000-0xfffff flags 0x0
[ 0.275093] pnp 00:0d: add mem 0x3f600000-0x3f6fffff flags 0x1
[ 0.275093] pnp 00:0d: add mem 0xfed00000-0xfed000ff flags 0x1
[ 0.275093] pnp 00:0d: add mem 0x3f5e0000-0x3f5fffff flags 0x1
[ 0.275093] pnp 00:0d: add mem 0x0-0x9ffff flags 0x1
[ 0.275093] pnp 00:0d: add mem 0x100000-0x3f5dffff flags 0x1
[ 0.275093] pnp 00:0d: add mem 0xfec00000-0xfec00fff flags 0x1
[ 0.275093] pnp 00:0d: add mem 0xfed13000-0xfed1ffff flags 0x1
[ 0.275093] pnp 00:0d: add mem 0xfed20000-0xfed9ffff flags 0x1
[ 0.275093] pnp 00:0d: add mem 0xfee00000-0xfee00fff flags 0x1
[ 0.275093] pnp 00:0d: add mem 0xffb00000-0xffb7ffff flags 0x1
[ 0.275093] pnp 00:0d: add mem 0xfff00000-0xffffffff flags 0x1
[ 0.275093] pnp 00:0d: add mem 0xe0000-0xeffff flags 0x1
[ 0.275093] pnp 00:0d: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[ 0.275093] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.275093] pnp: PnP ACPI: found 14 devices
[ 0.275093] ACPI: ACPI bus type pnp unregistered
[ 0.275093] usbcore: registered new interface driver usbfs
[ 0.275093] usbcore: registered new interface driver hub
[ 0.275093] usbcore: registered new device driver usb
[ 0.275093] PCI: Using ACPI for IRQ routing
[ 0.287667] PCI-GART: No AMD northbridge found.
[ 0.287675] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.287682] hpet0: 4 64-bit timers, 14318180 Hz
[ 0.291631] ACPI: RTC can wake from S4
[ 0.306550] pnp: the driver 'system' has been registered
[ 0.306566] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.306570] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.306575] system 00:01: ioport range 0x290-0x297 has been reserved
[ 0.306579] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.306582] system 00:01: driver attached
[ 0.306597] system 00:0a: ioport range 0x400-0x4bf could not be reserved
[ 0.306601] system 00:0a: driver attached
[ 0.306610] system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.306614] system 00:0c: driver attached
[ 0.306622] system 00:0d: iomem range 0xf0000-0xfffff could not be reserved
[ 0.306627] system 00:0d: iomem range 0x3f600000-0x3f6fffff has been reserved
[ 0.306631] system 00:0d: iomem range 0xfed00000-0xfed000ff could not be reserved
[ 0.306636] system 00:0d: iomem range 0x3f5e0000-0x3f5fffff could not be reserved
[ 0.306640] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.306644] system 00:0d: iomem range 0x100000-0x3f5dffff could not be reserved
[ 0.306649] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.306654] system 00:0d: iomem range 0xfed13000-0xfed1ffff could not be reserved
[ 0.306658] system 00:0d: iomem range 0xfed20000-0xfed9ffff could not be reserved
[ 0.306666] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.306668] system 00:0d: iomem range 0xffb00000-0xffb7ffff could not be reserved
[ 0.306671] system 00:0d: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.306673] system 00:0d: iomem range 0xe0000-0xeffff has been reserved
[ 0.306674] system 00:0d: driver attached
[ 0.310541] PCI: Bridge: 0000:00:1c.0
[ 0.310541] IO window: d000-dfff
[ 0.310541] MEM window: 0xfd900000-0xfd9fffff
[ 0.310541] PREFETCH window: 0x00000000fd800000-0x00000000fd8fffff
[ 0.310541] PCI: Bridge: 0000:00:1c.1
[ 0.310541] IO window: e000-efff
[ 0.310541] MEM window: 0xfde00000-0xfdefffff
[ 0.310541] PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff
[ 0.310541] PCI: Bridge: 0000:00:1e.0
[ 0.310541] IO window: c000-cfff
[ 0.310541] MEM window: 0xfdb00000-0xfdbfffff
[ 0.310541] PREFETCH window: 0x00000000fda00000-0x00000000fdafffff
[ 0.310541] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.310541] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.310541] ACPI: PCI Interrupt 0000:00:1c.1
-> GSI 17 (level, low) -> IRQ 17
[ 0.310541] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.310541] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.310541] NET: Registered protocol family 2
[ 0.346017] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.346388] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.346548] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.346548] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.346548] TCP reno registered
[ 0.356332] NET: Registered protocol family 1
[ 0.356424] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[ 0.511936] Switched to high resolution mode on CPU 0
[ 0.566521] it is
[ 0.798092] Freeing initrd memory: 6513k freed
[ 0.805015] audit: initializing netlink socket (disabled)
[ 0.805015] type=2000 audit(1247027079.788:1): initialized
[ 0.805015] Total HugeTLB memory allocated, 0
[ 0.805015] VFS: Disk quotas dquot_6.5.1
[ 0.805015] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.805015] msgmni has been set to 1988
[ 0.805015] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.805015] io scheduler noop registered
[ 0.805015] io scheduler anticipatory registered
[ 0.805015] io scheduler deadline registered
[ 0.805015] io scheduler cfq registered (default)
[ 0.805015] pci 0000:00:02.0: Boot video device
[ 0.805015] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.805015] assign_interrupt_mode Found MSI capability
[ 0.805015] Allocate Port Service[0000:00:1c.0:pcie00]
[ 0.805015] Allocate Port Service[0000:00:1c.0:pcie02]
[ 0.805015] Allocate Port Service[0000:00:1c.0:pcie03]
[ 0.805015] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.805015] assign_interrupt_mode Found MSI capability
[ 0.805015] Allocate Port Service[0000:00:1c.1:pcie00]
[ 0.805015] Allocate Port Service[0000:00:1c.1:pcie02]
[ 0.805015] Allocate Port Service[0000:00:1c.1:pcie03]
[ 0.805016] hpet_resources: 0xfed00000 is busy
[ 0.805016] Linux agpgart interface v0.103
[ 0.805016] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.805045] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.805045] pnp: the driver 'serial' has been registered
[ 0.805045] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.805045] serial 00:07: driver attached
[ 0.809015] brd: module loaded
[ 0.809015] input: Macintosh mouse button emulation as /class/input/input0
[ 0.809015] pnp: the driver 'i8042 kbd' has been registered
[ 0.809015] pnp: the driver 'i8042 aux' has been registered
[ 0.809015] i8042 aux 00:09: driver attached
[ 0.809015] PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
[ 0.809015] PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 0.809015] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.809015] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.829016] mice: PS/2 mouse device common for all mice
[ 0.829016] pnp: the driver 'rtc_cmos' has been registered
[ 0.829016] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.829016] rtc0: alarms up to one month
[ 0.829016] rtc_cmos 00:04: driver attached
[ 0.829016] cpuidle: using governor ladder
[ 0.829016] cpuidle: using governor menu
[ 0.829017] No iBFT detected.
[ 0.829017] TCP cubic registered
[ 0.829017] NET: Registered protocol family 17
[ 0.829017] registered taskstats version 1
[ 0.829017] rtc_cmos 00:04: setting system clock to 2009-07-08 04:24:40 UTC (1247027080)
[ 0.829017] Freeing unused kernel memory: 392k freed
[ 0.890021] ACPI: SSDT 3F5E7D40, 02AE (r1 PmRef Cpu0Ist 3000 INTL 20040311)
[ 0.890021] ACPI: ACPI0007:00 is registered as cooling_device0
[ 0.890021] ACPI: SSDT 3F5E8200, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20040311)
[ 0.890021] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.101406] USB Universal Host Controller Interface driver v3.0
[ 1.101446] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 1.101457] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 1.101461] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.101594] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.101624] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
[ 1.101688] usb usb1: configuration #1 chosen from 1 choice
[ 1.101709] hub 1-0:1.0: USB hub found
[ 1.101714] hub 1-0:1.0: 2 ports detected
[ 1.174010] No dock devices found.
[ 1.180408] SCSI subsystem initialized
[ 1.185767] libata version 3.00 loaded.
[ 1.203068] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.203070] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.203072] usb usb1: Product: UHCI Host Controller
[ 1.203074] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 1.203075] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.204153] ACPI: PCI Interrupt 0000:00:1a.1 -> GSI 21 (level, low) -> IRQ 21
[ 1.204164] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 1.204168] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.204211] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 1.204242] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00
[ 1.204304] usb usb2: configuration #1 chosen from 1 choice
[ 1.204324] hub 2-0:1.0: USB hub found
[ 1.204329] hub 2-0:1.0: 2 ports detected
[ 1.305391] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.305394] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.305395] usb usb2: Product: UHCI Host Controller
[ 1.305397] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 1.305398] usb usb2: SerialNumber: 0000:00:1a.1
[ 1.309266] ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 19
[ 1.309266] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[ 1.309266] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.309266] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 1.309266] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00
[ 1.309266] usb usb3: configuration #1 chosen from 1 choice
[ 1.309266] hub 3-0:1.0: USB hub found
[ 1.309266] hub 3-0:1.0: 2 ports detected
[ 1.409929] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.409931] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.409933] usb usb3: Product: UHCI Host Controller
[ 1.409934] usb usb3: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 1.409936] usb usb3: SerialNumber: 0000:00:1a.2
[ 1.413805] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 1.413805] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 1.413805] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.413805] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4
[ 1.417267] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.417267] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 1.417267] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
[ 1.429668] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.429757] usb usb4: configuration #1 chosen from 1 choice
[ 1.429793] hub 4-0:1.0: USB hub found
[ 1.429798] hub 4-0:1.0: 6 ports detected
[ 1.533368] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.533378] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.533380] usb usb4: Product: EHCI Host Controller
[ 1.533381] usb usb4: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
[ 1.533383] usb usb4: SerialNumber: 0000:00:1a.7
[ 1.537255] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 1.537255] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 1.537255] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.537255] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.537255] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
[ 1.537255] usb usb5: configuration #1 chosen from 1 choice
[ 1.537255] hub 5-0:1.0: USB hub found
[ 1.537255] hub 5-0:1.0: 2 ports detected
[ 1.637866] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.637868] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.637870] usb usb5: Product: UHCI Host Controller
[ 1.637871] usb usb5: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 1.637872] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.641743] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 19
[ 1.641743] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 1.641743] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.641743] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.641743] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
[ 1.641743] usb usb6: configuration #1 chosen from 1 choice
[ 1.641743] hub 6-0:1.0: USB hub found
[ 1.641743] hub 6-0:1.0: 2 ports detected
[ 1.741865] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.741869] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.741878] usb usb6: Product: UHCI Host Controller
[ 1.741880] usb usb6: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 1.741881] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.745755] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 1.745755] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 1.745755] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.745755] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.745755] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
[ 1.745755] usb usb7: configuration #1 chosen from 1 choice
[ 1.745755] hub 7-0:1.0: USB hub found
[ 1.745755] hub 7-0:1.0: 2 ports detected
[ 1.814559] usb 4-6: new high speed USB device using ehci_hcd and address 2
[ 1.847156] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.847164] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.847166] usb usb7: Product: UHCI Host Controller
[ 1.847168] usb usb7: Manufacturer: Linux 2.6.26-2-amd64 uhci_hcd
[ 1.847169] usb usb7: SerialNumber: 0000:00:1d.2
[ 1.850539] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 1.850539] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 1.850539] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.850539] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 1.851037] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.851037] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 1.851037] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
[ 1.942102] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.942190] usb usb8: configuration #1 chosen from 1 choice
[ 1.942227] hub 8-0:1.0: USB hub found
[ 1.942232] hub 8-0:1.0: 6 ports detected
[ 1.971709] usb 4-6: configuration #1 chosen from 1 choice
[ 1.974538] usb 4-6: New USB device found, idVendor=03f0, idProduct=4817
[ 1.974538] usb 4-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.974538] usb 4-6: Product: HP LaserJet P1007
[ 1.974538] usb 4-6: Manufacturer: Hewlett-Packard
[ 1.974538] usb 4-6: SerialNumber: EC0JPNC
[ 2.049239] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.049242] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.049243] usb usb8: Product: EHCI Host Controller
[ 2.049245] usb usb8: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
[ 2.049246] usb usb8: SerialNumber: 0000:00:1d.7
[ 2.053614] ata_piix 0000:00:1f.2: version 2.12
[ 2.053614] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
[ 2.053614] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 2.053614] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 2.053614] scsi0 : ata_piix
[ 2.053614] scsi1 : ata_piix
[ 2.053614] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf800 irq 14
[ 2.053614] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf808 irq 15
[ 2.533103] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.621541] ata1.00: ATA-8: WDC WD1600AAJS-60M0A0, 02.03E02, max UDMA/100
[ 2.621543] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.637519] ata1.00: configured for UDMA/100
[ 2.925134] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 3.201856] usb 6-1: configuration #1 chosen from 1 choice
[ 3.277205] usb 6-1: New USB device found, idVendor=0461, idProduct=4d22
[ 3.277208] usb 6-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.277210] usb 6-1: Product: USB Optical Mouse
[ 3.313267] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.321470] ata2.00: ATAPI: ATAPI DVD D DH16D3S, SH37, max UDMA/100
[ 3.337205] ata2.00: configured for UDMA/100
[ 3.337204] isa bounce pool size: 16 pages
[ 3.337204] scsi 0:0:0:0: Direct-Access ATA WDC WD1600AAJS-6 02.0 PQ: 0 ANSI: 5
[ 3.339577] scsi 1:0:0:0: CD-ROM ATAPI DVD D DH16D3S SH37 PQ: 0 ANSI: 5
[ 3.337205] ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 19
[ 3.337205] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 3.337205] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 3.337205] scsi2 : ata_piix
[ 3.337205] scsi3 : ata_piix
[ 3.337205] ata3: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf100 irq 19
[ 3.337205] ata4: SATA max UDMA/133 cmd 0xf300 ctl 0xf200 bmdma 0xf108 irq 19
[ 3.337205] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 3.337205] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 3.337205] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 3.337205] eth0: RTL8168c/8111c at 0xffffc200001e4000, 00:24:1d:66:38:d9, XID 3c4000c0 IRQ 1277
[ 3.532861] usb 6-2: new low speed USB device using uhci_hcd and address 3
[ 3.719757] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.749326] usb 6-2: configuration #1 chosen from 1 choice
[ 3.757701] usb 6-2: New USB device found, idVendor=413c, idProduct=2003
[ 3.757703] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.757705] usb 6-2: Product: Dell USB Keyboard
[ 3.757706] usb 6-2: Manufacturer: Dell
[ 3.757734] usbcore: registered new interface driver hiddev
[ 3.777323] input: USB Optical Mouse as /class/input/input1
[ 3.795130] input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-1
[ 3.808882] input: Dell Dell USB Keyboard as /class/input/input2
[ 3.821363] input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-2
[ 3.821388] usbcore: registered new interface driver usbhid
[ 3.821392] usbhid: v2.6:USB HID core driver
[ 4.052365] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.080004] Uniform Multi-Platform E-IDE driver
[ 4.080004] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 4.124560] Driver 'sd' needs updating - please use bus_type methods
[ 4.124640] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.124652] sd 0:0:0:0: [sda] Write Protect is off
[ 4.124654] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.124673] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.124718] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.124728] sd 0:0:0:0: [sda] Write Protect is off
[ 4.124730] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.124749] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.124751] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 4.146804] sda1 sda2 < sda5 sda6 sda7 >
[ 4.192258] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.212698] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 4.212698] Uniform CD-ROM driver Revision: 3.20
[ 4.212698] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.220698] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.220698] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.402889] PM: Starting manual resume from disk
[ 4.452905] kjournald starting. Commit interval 5 seconds
[ 4.452905] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.398407] udevd version 125 started
[ 6.252487] input: Power Button (FF) as /class/input/input3
[ 6.315657] ACPI: Power Button (FF) [PWRF]
[ 6.315704] input: Power Button (CM) as /class/input/input4
[ 6.380477] ACPI: Power Button (CM) [PWRB]
[ 6.508805] agpgart: Detected an Intel G33 Chipset.
[ 6.508805] agpgart: Detected 7164K stolen memory.
[ 6.523318] agpgart: AGP aperture is 256M @ 0xd0000000
[ 6.544499] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4817
[ 6.544499] usbcore: registered new interface driver usblp
[ 6.572499] input: PC Speaker as /class/input/input5
[ 6.662043] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 6.662043] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0460)
[ 6.662043] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.694046] ACPI: PCI Interrupt 0000:00:1f.3 -> GSI 18 (level, low) -> IRQ 18
[ 6.909437] pnp: the driver 'parport_pc' has been registered
[ 6.909437] parport_pc 00:08: reported by Plug and Play ACPI
[ 6.909437] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 7.007745] parport_pc 00:08: driver attached
[ 7.236890] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 7.237627] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 7.269958] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 8.992814] Adding 9518472k swap on /dev/sda7. Priority:-1 extents:1 across:9518472k
[ 9.330901] EXT3 FS on sda1, internal journal
[ 10.042903] loop: module loaded
[ 12.256387] NET: Registered protocol family 10
[ 12.256521] lo: Disabled Privacy Extensions
[ 12.418527] lp0: using parport0 (interrupt-driven).
[ 12.446805] ppdev: user-space parallel port driver
[ 15.816139] r8169: eth0: link up
[ 15.817584] r8169: eth0: link up
[ 17.926525] [drm] Initialized drm 1.1.0 20060810
[ 17.938627] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 17.938635] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 17.938710] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 18.301081] set status page addr 0x00033000
[ 32.627260] eth0: no IPv6 routers present
[ 84.227076] usblp0: removed
[ 2295.322647] set status page addr 0x00033000
[ 2577.659401] ppdev0: registered pardevice
[ 2577.703868] ppdev0: unregistered pardevice
[ 2605.303046] ppdev0: registered pardevice
[ 2605.351580] ppdev0: unregistered pardevice
[ 2696.326046] ppdev0: registered pardevice
[ 2696.374580] ppdev0: unregistered pardevice
[ 3022.004307] ppdev0: registered pardevice
[ 3022.056300] ppdev0: unregistered pardevice
[ 3022.757104] system-config-p[3944]: segfault at 3d4d7b000 ip 471431 sp 42135a20 error 6 in python2.5[400000+125000]
[ 3195.094481] UDF-fs: No VRS found
[ 3195.127914] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 3195.151914] ISOFS: changing to secondary root
[ 3504.296230] set status page addr 0x00033000
[ 3514.457838] kjournald starting. Commit interval 5 seconds
[ 3514.578166] EXT3 FS on sda6, internal journal
[ 3514.578166] EXT3-fs: mounted filesystem with ordered data mode.
[ 3514.693498] kjournald starting. Commit interval 5 seconds
[ 3514.784608] EXT3 FS on sda5, internal journal
[ 3514.784618] EXT3-fs: mounted filesystem with ordered data mode.
[ 3611.508035] usb 4-6: USB disconnect, address 2
[ 3612.946332] usb 4-6: new high speed USB device using ehci_hcd and address 3
[ 3613.098780] usb 4-6: configuration #1 chosen from 1 choice
[ 3613.102318] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4817
[ 3613.102318] usb 4-6: New USB device found, idVendor=03f0, idProduct=4817
[ 3613.102318] usb 4-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3613.102318] usb 4-6: Product: HP LaserJet P1007
[ 3613.102318] usb 4-6: Manufacturer: Hewlett-Packard
[ 3613.102318] usb 4-6: SerialNumber: EC0JPNC
[ 3880.835411] usblp0: removed
[ 3890.064835] usb 4-6: USB disconnect, address 3
[ 3891.644661] usb 4-6: new high speed USB device using ehci_hcd and address 4
[ 3891.822122] usb 4-6: configuration #1 chosen from 1 choice
[ 3891.827680] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4817
[ 3891.827770] usb 4-6: New USB device found, idVendor=03f0, idProduct=4817
[ 3891.827776] usb 4-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3891.827780] usb 4-6: Product: HP LaserJet P1007
[ 3891.827782] usb 4-6: Manufacturer: Hewlett-Packard
[ 3891.827785] usb 4-6: SerialNumber: EC0JPNC
[ 3913.647368] usblp0: removed
[ 3935.083172] ppdev0: registered pardevice
[ 3935.130022] ppdev0: unregistered pardevice
[ 4051.166193] set status page addr 0x00033000
[ 5502.413659] usb 4-6: USB disconnect, address 4
[ 5505.318856] usb 4-6: new high speed USB device using ehci_hcd and address 5
[ 5505.471338] usb 4-6: configuration #1 chosen from 1 choice
[ 5505.474212] usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4817
[ 5505.474314] usb 4-6: New USB device found, idVendor=03f0, idProduct=4817
[ 5505.474320] usb 4-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5505.474324] usb 4-6: Product: HP LaserJet P1007
[ 5505.474327] usb 4-6: Manufacturer: Hewlett-Packard
[ 5505.474329] usb 4-6: SerialNumber: EC0JPNC
[ 5514.220868] usb 4-6: USB disconnect, address 5
[ 5514.220868] usblp0: removed
[ 5685.543302] usb 4-6: new high speed USB device using ehci_hcd and address 6
[ 5685.700158] usb 4-6: configuration #1 chosen from 1 choice
[ 5685.707788] usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4817
[ 5685.707885] usb 4-6: New USB device found, idVendor=03f0, idProduct=4817
[ 5685.707889] usb 4-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5685.707892] usb 4-6: Product: HP LaserJet P1007
[ 5685.707895] usb 4-6: Manufacturer: Hewlett-Packard
[ 5685.707898] usb 4-6: SerialNumber: EC0JPNC
[ 5971.169544] usb 4-6: USB disconnect, address 6
[ 5971.169544] usblp0: removed
[ 6015.621760] usb 4-6: new high speed USB device using ehci_hcd and address 7
[ 6015.789595] usb 4-6: configuration #1 chosen from 1 choice
[ 6015.793498] usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4817
[ 6015.793498] usb 4-6: New USB device found, idVendor=03f0, idProduct=4817
[ 6015.793498] usb 4-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6015.793498] usb 4-6: Product: HP LaserJet P1007
[ 6015.793498] usb 4-6: Manufacturer: Hewlett-Packard
[ 6015.793498] usb 4-6: SerialNumber: EC0JPNC
[ 6055.278296] usb 4-6: USB disconnect, address 7
[ 6055.278296] usblp0: removed
[ 6065.877005] usb 4-6: new high speed USB device using ehci_hcd and address 8
[ 6066.026137] usb 4-6: configuration #1 chosen from 1 choice
[ 6066.031765] usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4817
[ 6066.031861] usb 4-6: New USB device found, idVendor=03f0, idProduct=4817
[ 6066.031865] usb 4-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6066.031869] usb 4-6: Product: HP LaserJet P1007
[ 6066.031872] usb 4-6: Manufacturer: Hewlett-Packard
[ 6066.031875] usb 4-6: SerialNumber: EC0JPNC
[ 6083.968524] usb 4-6: USB disconnect, address 8
[ 6083.972524] usblp0: removed
[ 6176.715323] usb 4-6: new high speed USB device using ehci_hcd and address 9
[ 6176.867302] usb 4-6: configuration #1 chosen from 1 choice
[ 6176.871304] usblp0: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4817
[ 6176.871304] usb 4-6: New USB device found, idVendor=03f0, idProduct=4817
[ 6176.871304] usb 4-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6176.871304] usb 4-6: Product: HP LaserJet P1007
[ 6176.871304] usb 4-6: Manufacturer: Hewlett-Packard
[ 6176.871304] usb 4-6: SerialNumber: EC0JPNC
[ 6241.612545] usb 4-6: USB disconnect, address 9
[ 6241.612545] usblp0: removed
[ 6280.630908] usb 4-6: new high speed USB device using ehci_hcd and address 10
[ 6280.783390] usb 4-6: configuration #1 chosen from 1 choice
[ 6280.785945] usblp0: USB Bidirectional printer dev 10 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4817
[ 6280.787390] usb 4-6: New USB device found, idVendor=03f0, idProduct=4817
[ 6280.787390] usb 4-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6280.787390] usb 4-6: Product: HP LaserJet P1007
[ 6280.787390] usb 4-6: Manufacturer: Hewlett-Packard
[ 6280.787390] usb 4-6: SerialNumber: EC0JPNC