For instance, when I connect/disconnect a USB storage drive,
Code: Select all
dmesg
Code: Select all
lsblk
Similarly
Code: Select all
lsusb
Code: Select all
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Code: Select all
lspci -nnk
Code: Select all
03:00.3 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Raven2 USB 3.1 [1022:15e5]
Subsystem: ASUSTeK Computer Inc. Raven2 USB 3.1 [1043:201f]
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
Code: Select all
journtalctl
Interestingly, when I connect the USB storage drive before booting the computer, it functions normally. However, it is not detected when connected after booting. Any advice would be great.