With that one sentence, p.H saved my computer. And the advice that he and L_V gave me in this thread was priceless.p.H wrote:e2fsck detects and marks bad blocks only when run with the -c option.
What ultimately worked for me was checking both my / (root) and /home partitions with the non-destructive read-write option, -cc from a Live CD:
Code: Select all
e2fsck -f -y -cc -C0 /dev/sda5
e2fsck -f -y -cc -C0 /dev/sda7
Next, I ran the checks again with the read-only option -c:
Code: Select all
e2fsck -f -y -c -C0 /dev/sda5
e2fsck -f -y -c -C0 /dev/sda7
Having repaired the file system, the next step was to repair the affected files:
In my case, I had a fresh install of Debian Buster and a Debian Buster Live CD, so I just copied them from the Live CD:p.H wrote:Note that e2fsck can remap bad blocks but cannot restore the unreadable contents of the affected files, so these files must be reinstalled from their respective packages.
Code: Select all
mkdir /media/inspiron
mount /dev/sda5 /media/inspiron
cp /usr/bin/$FILE01 /media/inspiron/usr/bin/$FILE01
cp /usr/bin/$FILE02 /media/inspiron/usr/bin/$FILE02
...
umount /dev/sda5
Thank you to p.H and L_V for helping me rescue this old machine! .
----------------------------------------
ORIGINAL POST:
After a fresh installation of Debian Buster on an old machine, the partition that contains my /home partition does not unmount at shutdown. The problem seems to be caused by an I/O error. At first glance, smartctl does not show any errors, but a deeper looks shows that the disk experienced a few errors on the / (root) partition a few years ago.
If I followed Linux Admins' "Fixing disk problems" guide would that resolve the issue?
Thanks in advance,
- Soul
Code: Select all
$ journalctl -r -b -1 -p3
-- Logs begin at Sun 2019-05-19 13:22:05 EDT, end at Sun 2019-05-19 15:26:53 EDT. --
May 19 14:51:02 inspiron systemd[1]: Failed unmounting /home.
May 19 14:51:02 inspiron kernel: print_req_error: I/O error, dev sda, sector 162964427
May 19 14:51:02 inspiron kernel: ata1.00: error: { UNC }
May 19 14:51:02 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 14:51:02 inspiron kernel: ata1.00: cmd 60/08:88:c8:a3:b6/00:00:09:00:00/40 tag 17 ncq dma 4096 in
res 41/40:08:cb:a3:b6/00:00:09:00:00/00 Emask 0x409 (media error) <F>
May 19 14:51:02 inspiron kernel: ata1.00: failed command: READ FPDMA QUEUED
May 19 14:51:02 inspiron kernel: ata1.00: irq_stat 0x40000008
May 19 14:51:02 inspiron kernel: ata1.00: exception Emask 0x0 SAct 0x20000 SErr 0x0 action 0x0
May 19 14:50:59 inspiron kernel: print_req_error: I/O error, dev sda, sector 162964427
May 19 14:50:59 inspiron kernel: ata1.00: error: { UNC }
May 19 14:50:59 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 14:50:59 inspiron kernel: ata1.00: cmd 60/20:a8:c0:a3:b6/00:00:09:00:00/40 tag 21 ncq dma 16384 in
res 41/40:20:cb:a3:b6/00:00:09:00:00/00 Emask 0x409 (media error) <F>
May 19 14:50:59 inspiron kernel: ata1.00: failed command: READ FPDMA QUEUED
May 19 14:50:59 inspiron kernel: ata1.00: irq_stat 0x40000008
May 19 14:50:59 inspiron kernel: ata1.00: exception Emask 0x0 SAct 0x200000 SErr 0x0 action 0x0
May 19 14:50:43 inspiron wpa_supplicant[509]: dbus: wpa_dbus_property_changed: no property SessionLength in object /fi/w1/wpa_supplicant1/Interfaces/1
May 19 14:47:06 inspiron root[7585]: /etc/dhcp/dhclient-exit-hooks.d/zzz_avahi-autoipd returned non-zero exit status 1
May 19 14:40:19 inspiron root[7277]: /etc/dhcp/dhclient-exit-hooks.d/zzz_avahi-autoipd returned non-zero exit status 1
May 19 14:34:55 inspiron root[7129]: /etc/dhcp/dhclient-exit-hooks.d/zzz_avahi-autoipd returned non-zero exit status 1
May 19 14:27:20 inspiron root[6970]: /etc/dhcp/dhclient-exit-hooks.d/zzz_avahi-autoipd returned non-zero exit status 1
May 19 14:19:26 inspiron root[6425]: /etc/dhcp/dhclient-exit-hooks.d/zzz_avahi-autoipd returned non-zero exit status 1
May 19 14:13:30 inspiron root[6164]: /etc/dhcp/dhclient-exit-hooks.d/zzz_avahi-autoipd returned non-zero exit status 1
May 19 14:07:00 inspiron root[4631]: /etc/dhcp/dhclient-exit-hooks.d/zzz_avahi-autoipd returned non-zero exit status 1
May 19 14:01:11 inspiron root[3004]: /etc/dhcp/dhclient-exit-hooks.d/zzz_avahi-autoipd returned non-zero exit status 1
May 19 13:53:40 inspiron root[2451]: /etc/dhcp/dhclient-exit-hooks.d/zzz_avahi-autoipd returned non-zero exit status 1
May 19 13:46:29 inspiron root[2355]: /etc/dhcp/dhclient-exit-hooks.d/zzz_avahi-autoipd returned non-zero exit status 1
May 19 13:41:26 inspiron root[2260]: /etc/dhcp/dhclient-exit-hooks.d/zzz_avahi-autoipd returned non-zero exit status 1
May 19 13:33:31 inspiron root[1803]: /etc/dhcp/dhclient-exit-hooks.d/zzz_avahi-autoipd returned non-zero exit status 1
May 19 13:28:13 inspiron root[1633]: /etc/dhcp/dhclient-exit-hooks.d/zzz_avahi-autoipd returned non-zero exit status 1
May 19 13:26:48 inspiron kernel: print_req_error: I/O error, dev sda, sector 201851126
May 19 13:26:48 inspiron kernel: ata1.00: error: { UNC }
May 19 13:26:48 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 13:26:48 inspiron kernel: ata1.00: cmd 60/08:c8:f0:00:08/00:00:0c:00:00/40 tag 25 ncq dma 4096 in
res 41/40:08:f6:00:08/00:00:0c:00:00/00 Emask 0x409 (media error) <F>
May 19 13:26:48 inspiron kernel: ata1.00: failed command: READ FPDMA QUEUED
May 19 13:26:48 inspiron kernel: ata1.00: error: { ABRT }
May 19 13:26:48 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 13:26:48 inspiron kernel: ata1.00: cmd 60/08:98:90:f6:3c/00:00:0a:00:00/40 tag 19 ncq dma 4096 in
res 41/04:00:f6:00:08/00:00:0c:00:00/00 Emask 0x1 (device error)
May 19 13:26:48 inspiron kernel: ata1.00: failed command: READ FPDMA QUEUED
May 19 13:26:48 inspiron kernel: ata1.00: error: { ABRT }
May 19 13:26:48 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 13:26:48 inspiron kernel: ata1.00: cmd 60/08:90:08:3e:d1/00:00:30:00:00/40 tag 18 ncq dma 4096 in
res 41/04:00:f6:00:08/00:00:0c:00:00/00 Emask 0x1 (device error)
May 19 13:26:48 inspiron kernel: ata1.00: failed command: READ FPDMA QUEUED
May 19 13:26:48 inspiron kernel: ata1.00: error: { ABRT }
May 19 13:26:48 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 13:26:48 inspiron kernel: ata1.00: cmd 60/08:88:08:2d:8d/00:00:15:00:00/40 tag 17 ncq dma 4096 in
res 41/04:00:f6:00:08/00:00:0c:00:00/00 Emask 0x1 (device error)
May 19 13:26:48 inspiron kernel: ata1.00: failed command: READ FPDMA QUEUED
May 19 13:26:48 inspiron kernel: ata1.00: error: { ABRT }
May 19 13:26:48 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 13:26:48 inspiron kernel: ata1.00: cmd 60/08:80:c0:3e:59/00:00:09:00:00/40 tag 16 ncq dma 4096 in
res 41/04:00:f6:00:08/00:00:0c:00:00/00 Emask 0x1 (device error)
May 19 13:26:48 inspiron kernel: ata1.00: failed command: READ FPDMA QUEUED
May 19 13:26:48 inspiron kernel: ata1.00: error: { ABRT }
May 19 13:26:48 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 13:26:48 inspiron kernel: ata1.00: cmd 61/18:30:18:7f:c5/00:00:2f:00:00/40 tag 6 ncq dma 12288 out
res 41/04:00:f6:00:08/00:00:0c:00:00/00 Emask 0x1 (device error)
May 19 13:26:48 inspiron kernel: ata1.00: failed command: WRITE FPDMA QUEUED
May 19 13:26:48 inspiron kernel: ata1.00: error: { ABRT }
May 19 13:26:48 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 13:26:48 inspiron kernel: ata1.00: cmd 60/08:28:c8:6a:71/00:00:15:00:00/40 tag 5 ncq dma 4096 in
res 41/04:00:f6:00:08/00:00:0c:00:00/00 Emask 0x1 (device error)
May 19 13:26:48 inspiron kernel: ata1.00: failed command: READ FPDMA QUEUED
May 19 13:26:48 inspiron kernel: ata1.00: irq_stat 0x40000001
May 19 13:26:48 inspiron kernel: ata1.00: exception Emask 0x0 SAct 0x20f0060 SErr 0x0 action 0x0
May 19 13:26:45 inspiron kernel: print_req_error: I/O error, dev sda, sector 361573512
May 19 13:26:45 inspiron kernel: print_req_error: I/O error, dev sda, sector 156843584
May 19 13:26:45 inspiron kernel: print_req_error: I/O error, dev sda, sector 201851126
May 19 13:26:45 inspiron kernel: print_req_error: I/O error, dev sda, sector 359754432
May 19 13:26:45 inspiron kernel: ata1.00: error: { ABRT }
May 19 13:26:45 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 13:26:45 inspiron kernel: ata1.00: cmd 60/d0:f0:88:2c:8d/00:00:15:00:00/40 tag 30 ncq dma 106496 in
res 41/04:00:f6:00:08/00:00:0c:00:00/00 Emask 0x1 (device error)
May 19 13:26:45 inspiron kernel: ata1.00: failed command: READ FPDMA QUEUED
May 19 13:26:45 inspiron kernel: ata1.00: error: { ABRT }
May 19 13:26:45 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 13:26:45 inspiron kernel: ata1.00: cmd 60/00:e8:40:3e:59/01:00:09:00:00/40 tag 29 ncq dma 131072 in
res 41/04:00:f6:00:08/00:00:0c:00:00/00 Emask 0x1 (device error)
May 19 13:26:45 inspiron kernel: ata1.00: failed command: READ FPDMA QUEUED
May 19 13:26:45 inspiron kernel: ata1.00: error: { ABRT }
May 19 13:26:45 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 13:26:45 inspiron kernel: ata1.00: cmd 60/08:58:08:3e:d1/00:00:30:00:00/40 tag 11 ncq dma 4096 in
res 41/04:00:f6:00:08/00:00:0c:00:00/00 Emask 0x1 (device error)
May 19 13:26:45 inspiron kernel: ata1.00: failed command: READ FPDMA QUEUED
May 19 13:26:45 inspiron kernel: ata1.00: error: { UNC }
May 19 13:26:45 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 13:26:45 inspiron kernel: ata1.00: cmd 60/08:48:f0:00:08/00:00:0c:00:00/40 tag 9 ncq dma 4096 in
res 41/40:08:f6:00:08/00:00:0c:00:00/00 Emask 0x409 (media error) <F>
May 19 13:26:45 inspiron kernel: ata1.00: failed command: READ FPDMA QUEUED
May 19 13:26:45 inspiron kernel: ata1.00: error: { ABRT }
May 19 13:26:45 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 13:26:45 inspiron kernel: ata1.00: cmd 60/08:18:90:f6:3c/00:00:0a:00:00/40 tag 3 ncq dma 4096 in
res 41/04:00:f6:00:08/00:00:0c:00:00/00 Emask 0x1 (device error)
May 19 13:26:45 inspiron kernel: ata1.00: failed command: READ FPDMA QUEUED
May 19 13:26:45 inspiron kernel: ata1.00: error: { ABRT }
May 19 13:26:45 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 13:26:45 inspiron kernel: ata1.00: cmd 60/40:10:c0:6a:71/00:00:15:00:00/40 tag 2 ncq dma 32768 in
res 41/04:00:f6:00:08/00:00:0c:00:00/00 Emask 0x1 (device error)
May 19 13:26:45 inspiron kernel: ata1.00: failed command: READ FPDMA QUEUED
May 19 13:26:45 inspiron kernel: ata1.00: error: { ABRT }
May 19 13:26:45 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 13:26:45 inspiron kernel: ata1.00: cmd 61/08:00:00:70:cc/00:00:31:00:00/40 tag 0 ncq dma 4096 out
res 41/04:00:f6:00:08/00:00:0c:00:00/00 Emask 0x1 (device error)
May 19 13:26:45 inspiron kernel: ata1.00: failed command: WRITE FPDMA QUEUED
May 19 13:26:45 inspiron kernel: ata1.00: irq_stat 0x40000001
May 19 13:26:45 inspiron kernel: ata1.00: exception Emask 0x0 SAct 0x60000a0d SErr 0x0 action 0x0
May 19 13:26:40 inspiron kernel: print_req_error: I/O error, dev sda, sector 804169080
May 19 13:26:40 inspiron kernel: print_req_error: I/O error, dev sda, sector 361572440
May 19 13:26:40 inspiron kernel: print_req_error: I/O error, dev sda, sector 201851904
May 19 13:26:40 inspiron kernel: print_req_error: I/O error, dev sda, sector 201851126
May 19 13:26:40 inspiron kernel: print_req_error: I/O error, dev sda, sector 813441024
May 19 13:26:40 inspiron kernel: print_req_error: I/O error, dev sda, sector 201848320
May 19 13:26:39 inspiron kernel: ata1.00: error: { ABRT }
May 19 13:26:39 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 13:26:39 inspiron kernel: ata1.00: cmd 60/40:e0:78:a5:ee/00:00:2f:00:00/40 tag 28 ncq dma 32768 in
res 41/04:00:f6:00:08/00:00:0c:00:00/00 Emask 0x1 (device error)
May 19 13:26:39 inspiron kernel: ata1.00: failed command: READ FPDMA QUEUED
May 19 13:26:39 inspiron kernel: ata1.00: error: { ABRT }
May 19 13:26:39 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 13:26:39 inspiron kernel: ata1.00: cmd 60/08:c8:30:59:d1/00:00:30:00:00/40 tag 25 ncq dma 4096 in
res 41/04:00:f6:00:08/00:00:0c:00:00/00 Emask 0x1 (device error)
May 19 13:26:39 inspiron kernel: ata1.00: failed command: READ FPDMA QUEUED
May 19 13:26:39 inspiron kernel: ata1.00: error: { ABRT }
May 19 13:26:39 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 13:26:39 inspiron kernel: ata1.00: cmd 60/08:c0:58:60:92/00:00:31:00:00/40 tag 24 ncq dma 4096 in
res 41/04:00:f6:00:08/00:00:0c:00:00/00 Emask 0x1 (device error)
May 19 13:26:39 inspiron kernel: ata1.00: failed command: READ FPDMA QUEUED
May 19 13:26:39 inspiron kernel: ata1.00: error: { ABRT }
May 19 13:26:39 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 13:26:39 inspiron kernel: ata1.00: cmd 60/58:60:58:28:8d/00:00:15:00:00/40 tag 12 ncq dma 45056 in
res 41/04:00:f6:00:08/00:00:0c:00:00/00 Emask 0x1 (device error)
May 19 13:26:39 inspiron kernel: ata1.00: failed command: READ FPDMA QUEUED
May 19 13:26:39 inspiron kernel: ata1.00: error: { ABRT }
May 19 13:26:39 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 13:26:39 inspiron kernel: ata1.00: cmd 60/d8:58:00:04:08/06:00:0c:00:00/40 tag 11 ncq dma 897024 in
res 41/04:00:f6:00:08/00:00:0c:00:00/00 Emask 0x1 (device error)
May 19 13:26:39 inspiron kernel: ata1.00: failed command: READ FPDMA QUEUED
May 19 13:26:39 inspiron kernel: ata1.00: error: { UNC }
May 19 13:26:39 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 13:26:39 inspiron kernel: ata1.00: cmd 60/00:50:00:00:08/04:00:0c:00:00/40 tag 10 ncq dma 524288 in
res 41/40:00:f6:00:08/00:04:0c:00:00/00 Emask 0x409 (media error) <F>
May 19 13:26:39 inspiron kernel: ata1.00: failed command: READ FPDMA QUEUED
May 19 13:26:39 inspiron kernel: ata1.00: error: { ABRT }
May 19 13:26:39 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 13:26:39 inspiron kernel: ata1.00: cmd 60/40:48:00:20:7c/00:00:30:00:00/40 tag 9 ncq dma 32768 in
res 41/04:00:f6:00:08/00:00:0c:00:00/00 Emask 0x1 (device error)
May 19 13:26:39 inspiron kernel: ata1.00: failed command: READ FPDMA QUEUED
May 19 13:26:39 inspiron kernel: ata1.00: error: { ABRT }
May 19 13:26:39 inspiron kernel: ata1.00: status: { DRDY ERR }
May 19 13:26:39 inspiron kernel: ata1.00: cmd 60/00:40:00:f6:07/06:00:0c:00:00/40 tag 8 ncq dma 786432 in
res 41/04:00:f6:00:08/00:00:0c:00:00/00 Emask 0x1 (device error)
May 19 13:26:39 inspiron kernel: ata1.00: failed command: READ FPDMA QUEUED
May 19 13:26:39 inspiron kernel: ata1.00: irq_stat 0x40000001
May 19 13:26:39 inspiron kernel: ata1.00: exception Emask 0x0 SAct 0x13001f00 SErr 0x0 action 0x0
May 19 13:22:09 inspiron kernel: mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: FW version command failed -5
May 19 13:22:09 inspiron kernel: mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: Could not read FW version
May 19 13:22:05 inspiron kernel: ACPI: SPCR: Unexpected SPCR Access Width. Defaulting to byte size
Code: Select all
# fdisk -l
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Disk model: ST9500325AS
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x07f2837e
Device Boot Start End Sectors Size Id Type
/dev/sda1 63 208844 208782 102M de Dell Utility
/dev/sda2 * 208845 30928844 30720000 14.7G 7 HPFS/NTFS/exFAT
/dev/sda3 30928845 155775023 124846179 59.5G 7 HPFS/NTFS/exFAT
/dev/sda4 155782305 976768064 820985760 391.5G 5 Extended
/dev/sda5 * 155782368 177305599 21523232 10.3G 83 Linux
/dev/sda6 177307648 199903231 22595584 10.8G 82 Linux swap / Solaris
/dev/sda7 199905280 976766975 776861696 370.4G 83 Linux
Code: Select all
# smartctl -l selftest /dev/sda
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-5-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
Code: Select all
# smartctl -a /dev/sda
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-5-amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.6
Device Model: ST9500325AS
Serial Number: 6VEGMVRP
LU WWN Device Id: 5 000c50 03067dd6f
Firmware Version: D005DEM1
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sun May 19 15:05:07 2019 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 139) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 101 089 006 Pre-fail Always - 29958806
3 Spin_Up_Time 0x0003 099 099 085 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 091 091 020 Old_age Always - 9917
5 Reallocated_Sector_Ct 0x0033 088 088 036 Pre-fail Always - 246
7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always - 207791365
9 Power_On_Hours 0x0032 073 073 000 Old_age Always - 23876
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 094 094 020 Old_age Always - 6861
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1097
188 Command_Timeout 0x0032 100 096 000 Old_age Always - 3759
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 051 036 045 Old_age Always In_the_past 49 (Min/Max 49/49 #998)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 20
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 78
193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 578157
194 Temperature_Celsius 0x0022 049 064 000 Old_age Always - 49 (0 18 0 0 0)
195 Hardware_ECC_Recovered 0x001a 053 045 000 Old_age Always - 29958806
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 4
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 4
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 22868 (153 213 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3790333358
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1937597633
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 987 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 987 occurred at disk power-on lifetime: 23876 hours (994 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 cb a3 b6 09 Error: UNC at LBA = 0x09b6a3cb = 162964427
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 c8 a3 b6 49 00 05:50:04.649 READ FPDMA QUEUED
60 00 28 e0 a3 b6 49 00 05:50:04.617 READ FPDMA QUEUED
60 00 08 c0 a3 b6 49 00 05:50:04.515 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 05:50:04.513 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 05:50:04.512 IDENTIFY DEVICE
Error 986 occurred at disk power-on lifetime: 23876 hours (994 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 cb a3 b6 09 Error: UNC at LBA = 0x09b6a3cb = 162964427
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 20 c0 a3 b6 49 00 05:50:02.009 READ FPDMA QUEUED
60 00 08 10 50 bb 49 00 05:50:01.961 READ FPDMA QUEUED
ea 00 00 00 00 00 a0 00 05:49:55.547 FLUSH CACHE EXT
61 00 08 a0 33 4a 49 00 05:49:55.547 WRITE FPDMA QUEUED
ea 00 00 00 00 00 a0 00 05:49:55.538 FLUSH CACHE EXT
Error 985 occurred at disk power-on lifetime: 23874 hours (994 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 f6 00 08 0c Error: UNC at LBA = 0x0c0800f6 = 201851126
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 04:25:50.279 READ FPDMA QUEUED
60 00 08 f0 00 08 4c 00 04:25:50.257 READ FPDMA QUEUED
61 00 08 ff ff ff 4f 00 04:25:50.256 WRITE FPDMA QUEUED
60 00 08 90 f6 3c 4a 00 04:25:50.256 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 04:25:50.256 READ FPDMA QUEUED
Error 984 occurred at disk power-on lifetime: 23874 hours (994 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 f6 00 08 0c Error: UNC at LBA = 0x0c0800f6 = 201851126
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 40 ff ff ff 4f 00 04:25:47.981 READ FPDMA QUEUED
60 00 80 28 9e 57 49 00 04:25:47.954 READ FPDMA QUEUED
60 00 40 ff ff ff 4f 00 04:25:47.953 READ FPDMA QUEUED
60 00 40 ff ff ff 4f 00 04:25:47.945 READ FPDMA QUEUED
60 00 40 ff ff ff 4f 00 04:25:47.941 READ FPDMA QUEUED
Error 983 occurred at disk power-on lifetime: 23874 hours (994 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 f6 00 08 0c Error: UNC at LBA = 0x0c0800f6 = 201851126
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 04:25:42.214 READ FPDMA QUEUED
60 00 d8 00 04 08 4c 00 04:25:42.209 READ FPDMA QUEUED
60 00 00 00 00 08 4c 00 04:25:42.207 READ FPDMA QUEUED
60 00 00 00 f6 07 4c 00 04:25:42.207 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 04:25:42.163 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.