Scheduled Maintenance: We are aware of an issue with Google, AOL, and Yahoo services as email providers which are blocking new registrations. We are trying to fix the issue and we have several internal and external support tickets in process to resolve the issue. Please see: viewtopic.php?t=158230
netinstall and no-ethernet laptop [Solved]
netinstall and no-ethernet laptop [Solved]
This is no emergency, but I am quite keen to try and achieve this and learn from it also without too much stress.
I made a start today on trying to set up a second laptop with Debian beginning from the netinstall iso, the one with the non-free firmware. I thought/ knew from the outset that without an ethernet port it would be either tricky or impossible but pressed on with this. During install the wifi worked, connecting to my tethered phone, which is what i use in my own home.
I found pages on wpa_supplicant and followed these to the letter. I am completely blank as to how to start the interface though. 'wlo1' is 'DOWN'. The phrase I found which begins 'ifup' (sorry, I don't have it all to hand) which as i understood it would start the wifi did not.
Feels a bit annoying that wifi works during install and then it forgets what it knew once you're installed.
I used the same sim then in a 3g router connected through USB. This was seen, as far as i can tell', as if ethernet, but again the interface is down. I have used this router like this with a full OS and DE where it acts like ethernet, i.e. no password needed etc.
I am working against a health problem which makes me a bit sketchy at times but feel sure I managed an install like this once. I could describe myself as having PTSD from some things that have happened and am a bit delicate, too much so for anything near sarcasm.
As of an hour's time I have access to someone else's internet for a day, with my own data credit due to run out very soon. So I have a narrow window to try and finish this job else I'll revert to reinstalling Debian LXDE from a live CD for now. But was very impressed with how my other machine runs when having built the OS from netinstall.
They may have a USB port on their router, but I don't know if that means this will act as if i have ethernet, trouble-free, if i connect that way.
I have all the deb files I'd be downloading on another machine, and have copied these to an external hard drive and burned them to a DVD. Is it possible to get my ethernet-free laptop to read from these at all? I thought I might be able to copy these debs to /var/apt/cache/archives/ and take it from there, and would then soon have Wicd installed, simplifying what feels otherwise very vague.
Could I put something like 'home/me/Downloads/debs/' in my sources.list or does that just not work?
Thanks for any gentle help.
Let me know if i've missed anything out detail-wise.
I made a start today on trying to set up a second laptop with Debian beginning from the netinstall iso, the one with the non-free firmware. I thought/ knew from the outset that without an ethernet port it would be either tricky or impossible but pressed on with this. During install the wifi worked, connecting to my tethered phone, which is what i use in my own home.
I found pages on wpa_supplicant and followed these to the letter. I am completely blank as to how to start the interface though. 'wlo1' is 'DOWN'. The phrase I found which begins 'ifup' (sorry, I don't have it all to hand) which as i understood it would start the wifi did not.
Feels a bit annoying that wifi works during install and then it forgets what it knew once you're installed.
I used the same sim then in a 3g router connected through USB. This was seen, as far as i can tell', as if ethernet, but again the interface is down. I have used this router like this with a full OS and DE where it acts like ethernet, i.e. no password needed etc.
I am working against a health problem which makes me a bit sketchy at times but feel sure I managed an install like this once. I could describe myself as having PTSD from some things that have happened and am a bit delicate, too much so for anything near sarcasm.
As of an hour's time I have access to someone else's internet for a day, with my own data credit due to run out very soon. So I have a narrow window to try and finish this job else I'll revert to reinstalling Debian LXDE from a live CD for now. But was very impressed with how my other machine runs when having built the OS from netinstall.
They may have a USB port on their router, but I don't know if that means this will act as if i have ethernet, trouble-free, if i connect that way.
I have all the deb files I'd be downloading on another machine, and have copied these to an external hard drive and burned them to a DVD. Is it possible to get my ethernet-free laptop to read from these at all? I thought I might be able to copy these debs to /var/apt/cache/archives/ and take it from there, and would then soon have Wicd installed, simplifying what feels otherwise very vague.
Could I put something like 'home/me/Downloads/debs/' in my sources.list or does that just not work?
Thanks for any gentle help.
Let me know if i've missed anything out detail-wise.
Last edited by tpprynn on 2020-10-07 22:28, edited 1 time in total.
-
- Emeritus
- Posts: 2435
- Joined: 2010-12-07 19:55
- Has thanked: 14 times
- Been thanked: 54 times
Re: netinstall and no-ethernet laptop
What is the make and model of the laptop?
I have, amongst other things, an HP Stream, which does not have an ethernet port or a CD/DVD-ROM. I found the easiest way was to get a "USB 2.0 to Ethernet RJ45 Internet LAN 10/100Mbps Network Adapter Converter Cable" from eBay for a few dollars. Just plug the ethernet into the adapter and the USB into the laptop.
I have, amongst other things, an HP Stream, which does not have an ethernet port or a CD/DVD-ROM. I found the easiest way was to get a "USB 2.0 to Ethernet RJ45 Internet LAN 10/100Mbps Network Adapter Converter Cable" from eBay for a few dollars. Just plug the ethernet into the adapter and the USB into the laptop.
Re: netinstall and no-ethernet laptop
Great, I was looking at those a couple of days ago but read reports of them not working, that they can't work. You've confirmed otherwise so I think I'll pay for one right now and unless I hear other good news this evening I'll install something else temporarily and use this adaptor when it comes.
(It's an Asus E403 or something like that, basically Asus's version of your HP Stream.)
(It's an Asus E403 or something like that, basically Asus's version of your HP Stream.)
-
- Emeritus
- Posts: 2435
- Joined: 2010-12-07 19:55
- Has thanked: 14 times
- Been thanked: 54 times
Re: netinstall and no-ethernet laptop
As far as I can see, despite three hundred mb of system utilities none of the commands that could get my wlo1 interface up are installed with the netinstall. None of the commands are recognised. None of the scripts I found would work. Puzzling.
Re: netinstall and no-ethernet laptop
Just a random thought, arochester beat me to it but depending upon specs and whether it supports virtualization, would say this is something better to learn in things like a virtual machine. I fancy KVM ... Doing minimal netinstalls can be a bit tricky, obviously esp for newer Debian users. What-which pkgs you got, which you need etc Oops, this doesn't work, I need this and that type of situation. Doing this type of thing in a VM leaves someone plenty of room to figure things out at whatever pace they need or want.
They-you get the install up to snuff and ready for prime-time, you'll have a much better idea of what you're doing. Of course helps to keep notes. Another random thought, being gnu/Linux + tech, almost anything imaginable with a computer is possible, actually shouldn't be all that hard to convert a VM, into a bare-metal installed OS. Haven't yet done so, only read about the process. Though probably best to focus on one proj at a time I guess.
They-you get the install up to snuff and ready for prime-time, you'll have a much better idea of what you're doing. Of course helps to keep notes. Another random thought, being gnu/Linux + tech, almost anything imaginable with a computer is possible, actually shouldn't be all that hard to convert a VM, into a bare-metal installed OS. Haven't yet done so, only read about the process. Though probably best to focus on one proj at a time I guess.
Most powerful FREE tech-support tool on the planet * HERE. *
Re: netinstall and no-ethernet laptop
Thanks, yes, I can see that's an idea. I have really overdone the distro-hopping and reinstalling over the years myself though, and though the worst of that habit's in the past I think I'll have a couple of stabs at this when the adaptor arrives. I set up a Thinkpad this way a week ago and though I was a bit chaotic with it and didn't take notes, which would have been the wise thing, it works fantastically and has shaved the learning curve a bit.
Re: netinstall and no-ethernet laptop
You can try live usb and if wifi works check what firmware was in use and install the same on the actual install.
- Head_on_a_Stick
- Posts: 14114
- Joined: 2014-06-01 17:46
- Location: London, England
- Has thanked: 81 times
- Been thanked: 133 times
Re: netinstall and no-ethernet laptop
It would be better if you posted what you actually did rather than vaguely describe a mysterious guide without providing a link to it.tpprynn wrote:I found pages on wpa_supplicant and followed these to the letter.
And anyway you don't need to mess around with wpa_supplicant directly (unless you want to).
The 'ifup wlo1' command would only work if you had configured the interface in /etc/network/interfacestpprynn wrote:I am completely blank as to how to start the interface though. 'wlo1' is 'DOWN'. The phrase I found which begins 'ifup' (sorry, I don't have it all to hand) which as i understood it would start the wifi did not.
See https://wiki.debian.org/WiFi/HowToUse#W ... d_WPA2-PSK for a guide (the numbered list has the instructions for ifupdown).
Ethernet connections are simple, just bring the interface up (replace $interface with the actual name of the interface, as listed in the plain 'ip link' output):tpprynn wrote:I used the same sim then in a 3g router connected through USB. This was seen, as far as i can tell', as if ethernet, but again the interface is down.
Code: Select all
# ip link set $interface up
Code: Select all
# dhclient $interface
I'll try my best. No promisestpprynn wrote:am a bit delicate, too much so for anything near sarcasm
No, those USB ports are usually for storage devices which can be accessed over the local network via the router.tpprynn wrote:They may have a USB port on their router, but I don't know if that means this will act as if i have ethernet
http://forums.debian.net/viewtopic.php?f=16&t=142973tpprynn wrote:despite three hundred mb of system utilities none of the commands that could get my wlo1 interface up are installed with the netinstall. None of the commands are recognised
deadbang
Re: netinstall and no-ethernet laptop
Great, many thanks for that - if the easy route with the adaptor doesn't work I'll have another attempt.
Re: netinstall and no-ethernet laptop
There are many pages which compares ip and ifconfig commands, like https://computingforgeeks.com/ifconfig- ... -on-linux/
For me it was a struggle to start using ip as had used ifconfig many years.
Now I used to use ip, but on every my computer I keep a list, where I check some rarely needed ip commands.
For me it was a struggle to start using ip as had used ifconfig many years.
Now I used to use ip, but on every my computer I keep a list, where I check some rarely needed ip commands.
Re: netinstall and no-ethernet laptop
Having just read the topic referring to new improved 'su -'... When I first started to use Debian after being a Mint and Ubuntu person I switched to su happily enough (and can't remember in those days during install being given the option of both or either). Since Debian 9 and 10 i've gone back to sudo and it had not seemed a problem for anything i've done till know. For one recent experimental install I filled out passwords for both and once the OS was up and running sudo didn't work. I was not able to use it to do the usual sudo tasks. The computer wasn't accepting it. So as occasionally there have been odd bugs with this sort of aroma with Debian and i don't fancy being kind of 'gaslighted' by a possible bug ;- / I went back to using Sudo. Is this why commands weren't working as referred to above? Because I wasn't using 'su', or 'su -'? Do long term Debian users still not use sudo? Should I be able to set up both during install without a problem once running?
Re: netinstall and no-ethernet laptop
I started using Debian from Woody, sudo has always been there. You have to install and configure it.
Nowadays, after installing, you only have to add your user to sudo group, logout, and login, and it works.
There is option in the installation process, installs sudo automatically if you don't make root account.
Here have been threads which is more secure, I'd rather leave that to each user.
I answered, but a better policy is to open a new thread for every new subject.
Nowadays, after installing, you only have to add your user to sudo group, logout, and login, and it works.
There is option in the installation process, installs sudo automatically if you don't make root account.
Here have been threads which is more secure, I'd rather leave that to each user.
I answered, but a better policy is to open a new thread for every new subject.
Re: netinstall and no-ethernet laptop
One common cause of command not found, would be a person hasn't installed the software pkg which provides that function. One of the things involved in doing a minimal netinstall, much which is already setup and ready to go for users on an out-of-box Nix install, somebody has to do for themselves in dealing with netinstalls.
The sudo vs "su -" like pretty much everything gnu/Linux is a matter of choice, someone should obviously use what they prefer and are most comfortable with, I always tend to set up a root user acct and also have always installed sudo too, that's my preference and do think it's a good practice, have broken sudo before, thus sudo cmds cease working. With a root acct could just login as root and fix it, as the root user still has all the privileges they need in a given OS.
The sudo vs "su -" like pretty much everything gnu/Linux is a matter of choice, someone should obviously use what they prefer and are most comfortable with, I always tend to set up a root user acct and also have always installed sudo too, that's my preference and do think it's a good practice, have broken sudo before, thus sudo cmds cease working. With a root acct could just login as root and fix it, as the root user still has all the privileges they need in a given OS.
Most powerful FREE tech-support tool on the planet * HERE. *
Re: netinstall and no-ethernet laptop
> Feels a bit annoying that wifi works during install and then it
> forgets what it knew once you're installed.
That's really the issue, isn't it? There is a possible explanation,
but it depends on what extra packages you installed. Did you
install a DE as part of the task selection?
--
Brian.
> forgets what it knew once you're installed.
That's really the issue, isn't it? There is a possible explanation,
but it depends on what extra packages you installed. Did you
install a DE as part of the task selection?
--
Brian.
--
Brian.
Brian.
Re: netinstall and no-ethernet laptop
I have LXDE, yes. For the moment - I put 10.6 on with LXDE so I could use the laptop while waiting for the adapter. When I know everything is feasible I'll wipe this.
It has arrived today and I'm sitting here in front of three computers, all with Debian. Somebody else's Cinnamon-equipped laptop, laptop number 3, works with this adapter, a dm9601 clone. So I just need to work out what's missing, or maybe find the name of the interface that comes about as a result of this adapter? I've forgotten what I knew three or four days ago... I will make a start on the googling oddyssey regarding this, but hopefully if I am bald in a few hours one of you will swing in, in loin cloth, and dangle some clues - I'm getting Tarzan and Poirot mixed up now but anyway - or simply slap me out of what will be my misery by then and provide a/ the solution. But I am happy to struggle for ninety minutes or so.
Ooh. I think I have a usb drive with Deb/Cinn on, that might be a good start, might discover at least the interface name, he said doubtfully. The dm9601 module is present though in what I have on the ethernet-free laptop.
Still, at least the adapter works, that's got to be about 1/20th of the battle.
It has arrived today and I'm sitting here in front of three computers, all with Debian. Somebody else's Cinnamon-equipped laptop, laptop number 3, works with this adapter, a dm9601 clone. So I just need to work out what's missing, or maybe find the name of the interface that comes about as a result of this adapter? I've forgotten what I knew three or four days ago... I will make a start on the googling oddyssey regarding this, but hopefully if I am bald in a few hours one of you will swing in, in loin cloth, and dangle some clues - I'm getting Tarzan and Poirot mixed up now but anyway - or simply slap me out of what will be my misery by then and provide a/ the solution. But I am happy to struggle for ninety minutes or so.
Ooh. I think I have a usb drive with Deb/Cinn on, that might be a good start, might discover at least the interface name, he said doubtfully. The dm9601 module is present though in what I have on the ethernet-free laptop.
Still, at least the adapter works, that's got to be about 1/20th of the battle.
Re: netinstall and no-ethernet laptop
I should have guessed - it's the classic 'enx00e04c534458' interface.
Re: netinstall and no-ethernet laptop
> ...I put 10.6 on with LXDE...
task-lxde-desktop does not install network manager. You have encountered
Bug #694068:
https://bugs.debian.org/cgi-bin/bugrepo ... bug=694068
If anyone wants to avoid it, then start the installer with
on the command line; (press TAB before booting).
Completely obvious of course .
task-lxde-desktop does not install network manager. You have encountered
Bug #694068:
https://bugs.debian.org/cgi-bin/bugrepo ... bug=694068
If anyone wants to avoid it, then start the installer with
Code: Select all
netcfg/target_network_config=ifupdown
Completely obvious of course .
--
Brian.
Brian.
Re: netinstall and no-ethernet laptop [Solved]
The adaptor route worked out well - after installing and rebooting it was recognised enabling me to install Fluxbox and get my bearings from there. I probably wouldn't have felt like proceeding if I hadn't already identified the interface name from the live Cinnamon/Debian usb drive, bunt unlike with the LXDE install the ethernet interface wasn't forgotten after install.
I imagine there would have been more satisfaction from doing this a harder way, with more learning, but learning that there is such a thing as an ethernet to usb adaptor that works is still learning...
As is witnessing the improved performance of this emmc-type machine after foregoing Cinnamon. Seem to have added a potential couple of hours or more to battery life and my aesthetic bugbear, gtk3, is nowhere in sight on this install. For quite a few years of going back and forth between Windows and Linux the presentation of most distros had been offputting for me, and now I find this basic look and behaviour ideal.
Thanks for all help and prodding vis a vis independent efforts. I hope this thread proves of use to somebody even if my efforts have been a bit chaotic, hence this step up to the camera in Jerry Springer summation style.
I imagine there would have been more satisfaction from doing this a harder way, with more learning, but learning that there is such a thing as an ethernet to usb adaptor that works is still learning...
As is witnessing the improved performance of this emmc-type machine after foregoing Cinnamon. Seem to have added a potential couple of hours or more to battery life and my aesthetic bugbear, gtk3, is nowhere in sight on this install. For quite a few years of going back and forth between Windows and Linux the presentation of most distros had been offputting for me, and now I find this basic look and behaviour ideal.
Thanks for all help and prodding vis a vis independent efforts. I hope this thread proves of use to somebody even if my efforts have been a bit chaotic, hence this step up to the camera in Jerry Springer summation style.