I've tried several times to form it and all without success.
However, I found something strange on another one I had added and it worked, but on this other new server it doesn't work at all.
The configuration would be to use proxmox if anyone could help.
On the other server I used something like
Code: Select all
auto lo
iface lo inet loopback
auto eno1
iface eno1 inet manual
auto eno2
iface eno2 inet manual
iface eno1 inet6 manual
auto vmbr0
iface vmbr0 inet static
address 192.9.90.72/27
gateway 192.9.90.70
bridge-ports eno1
bridge-stp off
bridge-fd 0
up ip route add 192.9.90.73/32 dev vmbr0
#e.g. 2001:db8::3, should not be the same as on enp1s0/eth0
iface vmbr0 inet6 static
address 2a01:458:851:31bc::2/64
gateway fe80::1
up ip -6 route add 2a01:458:851:31bc::/64 dev vmbr0
In fact, I need a Bridge network to adjust next time via Mac
If anyone can give any advice