Syntax error on line 24 of /etc/apache2/sites-enabled/default-ssl

Message

orynider · #1 Post by **orynider** » 2024-03-20 13:29

root@Programing-PC:~# journalctl -xeu apache2.service
░░ Subject: A start job for unit apache2.service has begun execution
░░ Defined-By: systemd
░░ Support: https://www.debian.org/support
░░
░░ A start job for unit apache2.service has begun execution.
░░
░░ The job identifier is 42264.
mar 20 15:15:14 Programing-PC apachectl[570974]: AH00526: Syntax error on line 24 of /etc/apache2/sites-enabled/default-ssl.>
mar 20 15:15:14 Programing-PC apachectl[570974]: Invalid command 'SSLEngine', perhaps misspelled or defined by a module not >
mar 20 15:15:14 Programing-PC systemd[1]: apache2.service: Control process exited, code=exited, status=1/FAILURE
░░ Subject: Unit process exited
░░ Defined-By: systemd
░░ Support: https://www.debian.org/support
░░
░░ An ExecStart= process belonging to unit apache2.service has exited.

░░
░░ The process' exit code is 'exited' and its exit status is 1.
mar 20 15:15:14 Programing-PC systemd[1]: apache2.service: Failed with result 'exit-code'.
░░ Subject: Unit failed
░░ Defined-By: systemd
░░ Support: https://www.debian.org/support
░░
░░ The unit apache2.service has entered the 'failed' state with result 'exit-code'.
mar 20 15:15:14 Programing-PC systemd[1]: Failed to start apache2.service - The Apache HTTP Server.
░░ Subject: A start job for unit apache2.service has failed
░░ Defined-By: systemd
░░ Support: https://www.debian.org/support
░░
░░ A start job for unit apache2.service has finished with a failure.
░░
░░ The job identifier is 42264 and the job result is failed.
lines 964-994/994 (END)

Code: Select all

Volumul in unitatea z nu are eticheta.
Numarul de serie al volumului este 240b-6525

Directory of z:\etc\apache2\sites-available

20.03.2024     15:31  <DIR>         .
20.03.2024     15:15  <DIR>         ..
20.09.2023     14:03         6,337  .default-ssl.conf
20.09.2023     14:03        16,384  .default-ssl.conf.swp
19.10.2023     12:52         1,286  000-default.conf
19.10.2023     12:56         4,573  default-ssl.conf
17.02.2023     15:12           656  openqa.conf.template
17.02.2023     15:12         2,658  openqa-common.inc
17.02.2023     15:12           807  openqa-ssl.conf.template
20.03.2024     15:32            88  sites-available.txt
       8 files                   32,789 bytes
       2 directories    177,706,688,512 bytes free

A workaround was on github.com were they added a check to the conf file alike in .htacces as in .default-ssl.conf for this dir:

Code: Select all

<IfModule mod_ssl.c>
	<VirtualHost _default_:443>
	#
	</VirtualHost>
</IfModule>

# vim: syntax=apache ts=4 sw=4 sts=4 sr noet

Note that if I add # SSLEngine apache2 is working with htttp and no https ...
We could try:

Code: Select all

<IfModule mod_ssl.c>
SSLEngine On
</IfModule>

When was broken I followed the steps from https://std.rocks/gnulinux_tftp.html
I used the IP 192.168.0.4 instead 192.168.1.10 and worked.
In sites-enabled we have default-ssl.conf and 000-default.conf ...
After commenting so the lines I get:
root@Programing-PC:~# journalctl -xeu apache2.service
░░ Support: https://www.debian.org/support
░░
░░ A start job for unit apache2.service has begun execution.
░░
░░ The job identifier is 44535.
mar 20 17:50:12 Programing-PC apachectl[686785]: (98)Address already in use: AH00072: make_sock: could not bind to address [>
mar 20 17:50:12 Programing-PC apachectl[686785]: (98)Address already in use: AH00072: make_sock: could not bind to address 0>
mar 20 17:50:12 Programing-PC apachectl[686785]: no listening sockets available, shutting down
mar 20 17:50:12 Programing-PC apachectl[686785]: AH00015: Unable to open logs
mar 20 17:50:12 Programing-PC systemd[1]: apache2.service: Control process exited, code=exited, status=1/FAILURE
░░ Subject: Unit process exited
░░ Defined-By: systemd
░░ Support: https://www.debian.org/support
░░
░░ An ExecStart= process belonging to unit apache2.service has exited.
░░
░░ The process' exit code is 'exited' and its exit status is 1.
mar 20 17:50:12 Programing-PC systemd[1]: apache2.service: Failed with result 'exit-code'.
░░ Subject: Unit failed
░░ Defined-By: systemd
░░ Support: https://www.debian.org/support
░░
░░ The unit apache2.service has entered the 'failed' state with result 'exit-code'.
mar 20 17:50:12 Programing-PC systemd[1]: Failed to start apache2.service - The Apache HTTP Server.
░░ Subject: A start job for unit apache2.service has failed
░░ Defined-By: systemd
░░ Support: https://www.debian.org/support
░░
░░ A start job for unit apache2.service has finished with a failure.
░░
░░ The job identifier is 44535 and the job result is failed.

root@Programing-PC:~#

lewulff · #2 Post by **lewulff** » 2024-03-21 00:41

Can you post your entire default-ssl file contents?

Note the actual file is probably in /etc/apache2/sites-avalbile

orynider · #3 Post by **orynider** » 2024-03-21 01:18

This is the original version that did made the error:

Code: Select all

<VirtualHost *:443>
	ServerAdmin webmaster@localhost

	DocumentRoot /var/www/html

	# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
	# error, crit, alert, emerg.
	# It is also possible to configure the loglevel for particular
	# modules, e.g.
	#LogLevel info ssl:warn

	ErrorLog ${APACHE_LOG_DIR}/error.log
	CustomLog ${APACHE_LOG_DIR}/access.log combined

	# For most configuration files from conf-available/, which are
	# enabled or disabled at a global level, it is possible to
	# include a line for only one particular virtual host. For example the
	# following line enables the CGI configuration for this host only
	# after it has been globally disabled with "a2disconf".
	#Include conf-available/serve-cgi-bin.conf

	#   SSL Engine Switch:
	#   Enable/Disable SSL for this virtual host.
	SSLEngine on

	#   A self-signed (snakeoil) certificate can be created by installing
	#   the ssl-cert package. See
	#   /usr/share/doc/apache2/README.Debian.gz for more info.
	#   If both key and certificate are stored in the same file, only the
	#   SSLCertificateFile directive is needed.
	SSLCertificateFile      /etc/ssl/certs/ssl-cert-snakeoil.pem
	SSLCertificateKeyFile   /etc/ssl/private/ssl-cert-snakeoil.key

	#   Server Certificate Chain:
	#   Point SSLCertificateChainFile at a file containing the
	#   concatenation of PEM encoded CA certificates which form the
	#   certificate chain for the server certificate. Alternatively
	#   the referenced file can be the same as SSLCertificateFile
	#   when the CA certificates are directly appended to the server
	#   certificate for convinience.
	#SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt

	#   Certificate Authority (CA):
	#   Set the CA certificate verification path where to find CA
	#   certificates for client authentication or alternatively one
	#   huge file containing all of them (file must be PEM encoded)
	#   Note: Inside SSLCACertificatePath you need hash symlinks
	#         to point to the certificate files. Use the provided
	#         Makefile to update the hash symlinks after changes.
	#SSLCACertificatePath /etc/ssl/certs/
	#SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt

	#   Certificate Revocation Lists (CRL):
	#   Set the CA revocation path where to find CA CRLs for client
	#   authentication or alternatively one huge file containing all
	#   of them (file must be PEM encoded)
	#   Note: Inside SSLCARevocationPath you need hash symlinks
	#         to point to the certificate files. Use the provided
	#         Makefile to update the hash symlinks after changes.
	#SSLCARevocationPath /etc/apache2/ssl.crl/
	#SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl

	#   Client Authentication (Type):
	#   Client certificate verification type and depth.  Types are
	#   none, optional, require and optional_no_ca.  Depth is a
	#   number which specifies how deeply to verify the certificate
	#   issuer chain before deciding the certificate is not valid.
	#SSLVerifyClient require
	#SSLVerifyDepth  10

	#   SSL Engine Options:
	#   Set various options for the SSL engine.
	#   o FakeBasicAuth:
	#    Translate the client X.509 into a Basic Authorisation.  This means that
	#    the standard Auth/DBMAuth methods can be used for access control.  The
	#    user name is the `one line' version of the client's X.509 certificate.
	#    Note that no password is obtained from the user. Every entry in the user
	#    file needs this password: `xxj31ZMTZzkVA'.
	#   o ExportCertData:
	#    This exports two additional environment variables: SSL_CLIENT_CERT and
	#    SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
	#    server (always existing) and the client (only existing when client
	#    authentication is used). This can be used to import the certificates
	#    into CGI scripts.
	#   o StdEnvVars:
	#    This exports the standard SSL/TLS related `SSL_*' environment variables.
	#    Per default this exportation is switched off for performance reasons,
	#    because the extraction step is an expensive operation and is usually
	#    useless for serving static content. So one usually enables the
	#    exportation for CGI and SSI requests only.
	#   o OptRenegotiate:
	#    This enables optimized SSL connection renegotiation handling when SSL
	#    directives are used in per-directory context.
	#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
	<FilesMatch "\.(?:cgi|shtml|phtml|php)$">
		SSLOptions +StdEnvVars
	</FilesMatch>
	<Directory /usr/lib/cgi-bin>
		SSLOptions +StdEnvVars
	</Directory>
</VirtualHost>

This is the version that I have now, and apache2 is working with http only:

Code: Select all

<VirtualHost *:443>
	ServerAdmin webmaster@localhost

	DocumentRoot /var/www/html

	# Available loglevels: trace8, ..., trace1, debug, info, notice, warn,
	# error, crit, alert, emerg.
	# It is also possible to configure the loglevel for particular
	# modules, e.g.
	#LogLevel info ssl:warn

	ErrorLog ${APACHE_LOG_DIR}/error.log
	CustomLog ${APACHE_LOG_DIR}/access.log combined

	# For most configuration files from conf-available/, which are
	# enabled or disabled at a global level, it is possible to
	# include a line for only one particular virtual host. For example the
	# following line enables the CGI configuration for this host only
	# after it has been globally disabled with "a2disconf".
	#Include conf-available/serve-cgi-bin.conf

	#   SSL Engine Switch:
	#   Enable/Disable SSL for this virtual host.
	<IfModule mod_ssl.c>
	SSLEngine On
	</IfModule>

	#   A self-signed (snakeoil) certificate can be created by installing
	#   the ssl-cert package. See
	#   /usr/share/doc/apache2/README.Debian.gz for more info.
	#   If both key and certificate are stored in the same file, only the
	#   SSLCertificateFile directive is needed.
	<IfModule mod_ssl.c>
	SSLCertificateFile      /etc/ssl/certs/ssl-cert-snakeoil.pem
	SSLCertificateKeyFile   /etc/ssl/private/ssl-cert-snakeoil.key
	</IfModule>
	#   Server Certificate Chain:
	#   Point SSLCertificateChainFile at a file containing the
	#   concatenation of PEM encoded CA certificates which form the
	#   certificate chain for the server certificate. Alternatively
	#   the referenced file can be the same as SSLCertificateFile
	#   when the CA certificates are directly appended to the server
	#   certificate for convinience.
	#SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt

	#   Certificate Authority (CA):
	#   Set the CA certificate verification path where to find CA
	#   certificates for client authentication or alternatively one
	#   huge file containing all of them (file must be PEM encoded)
	#   Note: Inside SSLCACertificatePath you need hash symlinks
	#         to point to the certificate files. Use the provided
	#         Makefile to update the hash symlinks after changes.
	#SSLCACertificatePath /etc/ssl/certs/
	#SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt

	#   Certificate Revocation Lists (CRL):
	#   Set the CA revocation path where to find CA CRLs for client
	#   authentication or alternatively one huge file containing all
	#   of them (file must be PEM encoded)
	#   Note: Inside SSLCARevocationPath you need hash symlinks
	#         to point to the certificate files. Use the provided
	#         Makefile to update the hash symlinks after changes.
	#SSLCARevocationPath /etc/apache2/ssl.crl/
	#SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl

	#   Client Authentication (Type):
	#   Client certificate verification type and depth.  Types are
	#   none, optional, require and optional_no_ca.  Depth is a
	#   number which specifies how deeply to verify the certificate
	#   issuer chain before deciding the certificate is not valid.
	#SSLVerifyClient require
	#SSLVerifyDepth  10

	#   SSL Engine Options:
	#   Set various options for the SSL engine.
	#   o FakeBasicAuth:
	#    Translate the client X.509 into a Basic Authorisation.  This means that
	#    the standard Auth/DBMAuth methods can be used for access control.  The
	#    user name is the `one line' version of the client's X.509 certificate.
	#    Note that no password is obtained from the user. Every entry in the user
	#    file needs this password: `xxj31ZMTZzkVA'.
	#   o ExportCertData:
	#    This exports two additional environment variables: SSL_CLIENT_CERT and
	#    SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
	#    server (always existing) and the client (only existing when client
	#    authentication is used). This can be used to import the certificates
	#    into CGI scripts.
	#   o StdEnvVars:
	#    This exports the standard SSL/TLS related `SSL_*' environment variables.
	#    Per default this exportation is switched off for performance reasons,
	#    because the extraction step is an expensive operation and is usually
	#    useless for serving static content. So one usually enables the
	#    exportation for CGI and SSI requests only.
	#   o OptRenegotiate:
	#    This enables optimized SSL connection renegotiation handling when SSL
	#    directives are used in per-directory context.
	#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
	<FilesMatch "\.(?:cgi|shtml|phtml|php)$">
	<IfModule mod_ssl.c>
		SSLOptions +StdEnvVars
	</IfModule>
	</FilesMatch>
	<Directory /usr/lib/cgi-bin>
	<IfModule mod_ssl.c>
		SSLOptions +StdEnvVars
	</IfModule>
	</Directory>
</VirtualHost>

Debian User Forums

Syntax error on line 24 of /etc/apache2/sites-enabled/default-ssl

Syntax error on line 24 of /etc/apache2/sites-enabled/default-ssl

Re: Syntax error on line 24 of /etc/apache2/sites-enabled/default-ssl

Re: Syntax error on line 24 of /etc/apache2/sites-enabled/default-ssl