Debian 11.6
deirfyes@debianplex:~$ sudo uname -r
6.0.0-0.deb11.6-amd64
deirfyes@debianplex:~$ cat /etc/apt/sources.list
# deb cdrom:[Debian GNU/Linux 11.3.0 _Bullseye_ - Official amd64 DVD Binary-1 20220326-11:23]/ bullseye contrib main
#deb cdrom:[Debian GNU/Linux 11.3.0 _Bullseye_ - Official amd64 DVD Binary-1 20220326-11:23]/ bullseye contrib main
deb http://deb.debian.org/debian/ bullseye main contrib non-free
deb-src http://deb.debian.org/debian/ bullseye main contrib non-free
deb http://security.debian.org/debian-security bullseye-security main contrib non-free
deb-src http://security.debian.org/debian-security bullseye-security main contrib non-free
# bullseye-updates, to get updates before a point release is made;
# see https://www.debian.org/doc/manuals/debi ... _backports
deb http://deb.debian.org/debian/ bullseye-updates main contrib non-free
deb-src http://deb.debian.org/debian/ bullseye-updates main contrib non-free
deb http://deb.debian.org/debian bullseye-backports main contrib non-free
root@debianplex:/etc/apt/sources.list.d# nano plexmediaserver.list
root@debianplex:/etc/apt/sources.list.d# nano plexmediaserver.list.dpkg-dist
root@debianplex:/etc/apt/sources.list.d# nano nvidia-drivers.list
Good Morning,
I have been struggling to get my Nvidia graphics card drivers installed into my server for quite sometime and I feel like I've hit a wall. I've followed so many guides and made so many attempts, I'll try and summarize everything I've done so far.
https://www.linuxtoday.com/developer/in ... ian-11-10/
https://idroot.us/install-nvidia-drivers-debian-11/
https://www.linuxcapable.com/install-nv ... _Pre_setup
https://www.linuxcapable.com/install-nv ... on-debian/
https://forums.developer.nvidia.com/t/n ... g/197141/5
https://linuxhint.com/install-kernel-headers-debian/
I've followed these guides at some point or another and every time, after reboot, the nvidia persistence daemon fails to start. When I look at the journal, I see:
Failed to query NVIDIA devices. Please ensure that the NVIDIA device files (/dev/nvidia*) exist, and that user 106 has read and write permissions for those files
Naturally, nothing exists there which is why it's failing, but I don't know why nothing exists there.
I've checked that secure boot is disabled in my bios. It is.
I've purged and installed nvidia drivers from the repo's to no luck
I've added the nvidia repositories and installed, no luck.
I've tried backports with no luck.
Does anyone have suggestions cause I'm out of ideas. Every site makes it sound so easy but when I go through the steps, nothing.
Scheduled Maintenance: We are aware of an issue with Google, AOL, and Yahoo services as email providers which are blocking new registrations. We are trying to fix the issue and we have several internal and external support tickets in process to resolve the issue. Please see: viewtopic.php?t=158230
[Hardware] Nvidia RTX 3050 driver install
-
- Global Moderator
- Posts: 2973
- Joined: 2014-07-20 18:12
- Location: Europe
- Has thanked: 75 times
- Been thanked: 406 times
Re: [Hardware] Nvidia RTX 3050 driver install
Hello,
Can you install the inxi package and acquire/share the output of the command:
Can you share the output of this command (the output of the command will be in lspci.log):
Please use the code tag (see my previous commands) to include commands or logs
The non-free driver 510.108 [1] should work.
---
[1] https://packages.debian.org/bookworm/nvidia-driver
Can you install the inxi package and acquire/share the output of the command:
Code: Select all
inxi -G
Code: Select all
lspci -vvv > lspci.log
The non-free driver 510.108 [1] should work.
---
[1] https://packages.debian.org/bookworm/nvidia-driver
- sunrat
- Administrator
- Posts: 6498
- Joined: 2006-08-29 09:12
- Location: Melbourne, Australia
- Has thanked: 118 times
- Been thanked: 476 times
Re: [Hardware] Nvidia RTX 3050 driver install
You also need firmware for Nvidia which is in the firmware-misc-nonfree package.
what is the purpose of this? Nvidia drivers are available from the normal non-free repo, no separate list is needed.
Please show
Code: Select all
root@debianplex:/etc/apt/sources.list.d# nano nvidia-drivers.list
Please show
Code: Select all
inxi -Gr
“ computer users can be divided into 2 categories:
Those who have lost data
...and those who have not lost data YET ” Remember to BACKUP!
Those who have lost data
...and those who have not lost data YET ” Remember to BACKUP!
Re: [Hardware] Nvidia RTX 3050 driver install
@Aki Here is what you asked for:Aki wrote: ↑2023-01-22 15:41 Hello,
Can you install the inxi package and acquire/share the output of the command:Can you share the output of this command (the output of the command will be in lspci.log):Code: Select all
inxi -G
Please use the code tag (see my previous commands) to include commands or logsCode: Select all
lspci -vvv > lspci.log
The non-free driver 510.108 [1] should work.
---
[1] https://packages.debian.org/bookworm/nvidia-driver
Code: Select all
Graphics: Device-1: NVIDIA driver: N/A -----note: I believe I purged Nvidia off the system attempting to perform one of the installs and haven't installed it again
Display: server: X.org 1.20.11 driver: loaded: N/A note: n/a (using device driver) tty: 263x74
Message: Advanced graphics data unavailable in console for root.
when I ran the 2nd request, before opening the log, I did get this:
root@debianplex:/etc/apt/sources.list.d# lspci -vvv > /tmp/lspci.log
pcilib: sysfs_read_vpd: read failed: No such device
The log file is too large for here.
https://paste.debian.net/1268154/
Thank you very much for helping as well. This has been driving me crazy.
Re: [Hardware] Nvidia RTX 3050 driver install
@sunratsunrat wrote: ↑2023-01-22 22:14 You also need firmware for Nvidia which is in the firmware-misc-nonfree package.
what is the purpose of this? Nvidia drivers are available from the normal non-free repo, no separate list is needed.Code: Select all
root@debianplex:/etc/apt/sources.list.d# nano nvidia-drivers.list
Please showCode: Select all
inxi -Gr
Here is what you asked for
Code: Select all
Graphics: Device-1: NVIDIA driver: N/A
Display: server: X.org 1.20.11 driver: loaded: N/A note: n/a (using device driver) tty: 263x74
Message: Advanced graphics data unavailable in console for root.
root@debianplex:/etc/apt/sources.list.d# inxi -Gr
Graphics: Device-1: NVIDIA driver: N/A
Display: server: X.org 1.20.11 driver: loaded: N/A note: n/a (using device driver) tty: 263x74
Message: Advanced graphics data unavailable in console for root.
Repos: Active apt repos in: /etc/apt/sources.list
1: deb http://deb.debian.org/debian/ bullseye main contrib non-free
2: deb-src http://deb.debian.org/debian/ bullseye main contrib non-free
3: deb http://security.debian.org/debian-security bullseye-security main contrib non-free
4: deb-src http://security.debian.org/debian-security bullseye-security main contrib non-free
5: deb http://deb.debian.org/debian/ bullseye-updates main contrib non-free
6: deb-src http://deb.debian.org/debian/ bullseye-updates main contrib non-free
7: deb http://deb.debian.org/debian bullseye-backports main contrib non-free
No active apt repos in: /etc/apt/sources.list.d/nvidia-drivers.list ----Note: I disabled the repo in my sources.list.d to attempt to install things correctly.
Active apt repos in: /etc/apt/sources.list.d/plexmediaserver.list
1: deb https://downloads.plex.tv/repo/deb public main
-
- Global Moderator
- Posts: 2973
- Joined: 2014-07-20 18:12
- Location: Europe
- Has thanked: 75 times
- Been thanked: 406 times
Re: [Hardware] Nvidia RTX 3050 driver install
Hello,
These are the data about your graphic card from your previous log:
It is reported that it's using:
Your nvidia card should be supported by the nvidia driver version in Debian Bullseye [2] (see Supported products).
See here [3] for Troubleshooting of NVIDIA Proprietary Driver on Debian: please report about the checks proposed in it.
Hope that helps.
---
[1] https://packages.debian.org/bullseye/nvidia-driver
[2] https://www.nvidia.com/Download/driverR ... 637/en-us/
[3] https://wiki.debian.org/NvidiaGraphicsD ... leshooting
These are the data about your graphic card from your previous log:
Code: Select all
09:00.0 VGA compatible controller: NVIDIA Corporation Device 2507 (rev a1) (prog-if 00 [VGA controller])
Subsystem: Gigabyte Technology Co., Ltd Device 40a9
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at e0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at f000 [size=128]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 16GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 16GT/s (ok), Width x8 (downgraded)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range AB, TimeoutDis+ NROPrPrP- LTR+
10BitTagComp+ 10BitTagReq+ OBFF Via message, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
FRS-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ OBFF Disabled,
AtomicOpsCtl: ReqEn-
LnkCap2: Supported Link Speeds: 2.5-16GT/s, Crosslink- Retimer+ 2Retimers+ DRS-
LnkCtl2: Target Link Speed: 16GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+ EqualizationPhase1+
EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [250 v1] Latency Tolerance Reporting
Max snoop latency: 1048576ns
Max no snoop latency: 1048576ns
Capabilities: [258 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=255us PortTPowerOnTime=10us
L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
T_CommonMode=0us LTR1.2_Threshold=32768ns
L1SubCtl2: T_PwrOn=10us
Capabilities: [128 v1] Power Budgeting <?>
Capabilities: [420 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Capabilities: [900 v1] Secondary PCI Express
LnkCtl3: LnkEquIntrruptEn- PerformEqu-
LaneErrStat: 0
Capabilities: [bb0 v1] Physical Resizable BAR
BAR 0: current size: 16MB, supported: 16MB
BAR 1: current size: 256MB, supported: 64MB 128MB 256MB 512MB 1GB 2GB 4GB 8GB
BAR 3: current size: 32MB, supported: 32MB
Capabilities: [c1c v1] Physical Layer 16.0 GT/s <?>
Capabilities: [d00 v1] Lane Margining at the Receiver <?>
Capabilities: [e00 v1] Data Link Feature <?>
[code]Kernel modules: nvidia
Code: Select all
Kernel modules: nvidia
See here [3] for Troubleshooting of NVIDIA Proprietary Driver on Debian: please report about the checks proposed in it.
Hope that helps.
---
[1] https://packages.debian.org/bullseye/nvidia-driver
[2] https://www.nvidia.com/Download/driverR ... 637/en-us/
[3] https://wiki.debian.org/NvidiaGraphicsD ... leshooting