[SOLVED] Laptop on Lid Close - Not Suspended, just locked

New to Debian (Or Linux in general)? Ask your questions here!
Post Reply
Message
Author
jesus92gz
Posts: 121
Joined: 2015-02-06 18:07

[SOLVED] Laptop on Lid Close - Not Suspended, just locked

#1 Post by jesus92gz »

Hello.

I'm having a problem with Debian 7.8 Wheezy. I'm using Gnome in classic mode.

I have configured in advanced settings so that when the lid is closed, the laptop will suspend. But instead of being suspended, when I close the lid, the session is locked. So it's detecting the lid is closing, but action is misconfigured. When I press my keyboard shortcut to suspend, or click shutdown... suspend, it is being suspended correctly.

Here it is the image of the configuration in advanced settings:
Image


This another problem is offtopic, but I think that's somehow related with power management as well:
Sometimes, when I the computer is on for a while, without any activity, the computer is just locked. The screen is fully black, no blinking cursor, and if I press CTRL + ALT + F1 [or F2, F3, Fn], it's not displaying any terminal. If I press CTRL + ALT + SUPR/DELETE it won't reboot neither.

Thank you.
Last edited by jesus92gz on 2015-02-15 18:54, edited 1 time in total.
Top
v&n
Posts: 635
Joined: 2015-02-04 02:57
Been thanked: 3 times

Re: Laptop on Lid Close - Not Suspended, just locked

#2 Post by v&n »

Have you checked the logs after closing -> reopening the lid and logging back? Particularly these ones -
  1. pm-suspend.log
  2. dmesg
  3. syslog
in /var/log directory. Post back the contents of the first one and last 40-50 lines of the latter two (immediately after suspend - fail - log back cycle) if unsure. Might be able to give us some clues.
Top
jesus92gz
Posts: 121
Joined: 2015-02-06 18:07

Re: Laptop on Lid Close - Not Suspended, just locked

#3 Post by jesus92gz »

pm-suspend.log (I think that, if I'm correct, this log is created when I press suspend shortcut or in the shutdown menu)

Code: Select all

Initial commandline parameters: 
Thu Feb 12 22:08:09 CET 2015: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend:

/usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux debian 3.16.0-0.bpo.4-amd64 #1 SMP Debian 3.16.7-ckt2-1~bpo70+1 (2014-12-08) x86_64 GNU/Linux
Module                  Size  Used by
ctr                    13023  0 
ccm                    17587  0 
parport_pc             26287  0 
ppdev                  16782  0 
lp                     17074  0 
parport                35743  3 lp,ppdev,parport_pc
bnep                   17432  2 
rfcomm                 57995  0 
bluetooth             386513  10 bnep,rfcomm
6lowpan_iphc           16588  1 bluetooth
binfmt_misc            16917  1 
uinput                 17372  1 
nfsd                  275168  2 
auth_rpcgss            55113  1 nfsd
oid_registry           12419  1 auth_rpcgss
nfs_acl                12511  1 nfsd
nfs                   196300  0 
lockd                  87642  2 nfs,nfsd
fscache                45457  1 nfs
sunrpc                249620  6 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
fuse                   87557  5 
nls_utf8               12456  1 
nls_cp437              16553  1 
vfat                   17135  1 
fat                    61944  1 vfat
loop                   26525  0 
uvcvideo               78997  0 
videobuf2_vmalloc      12816  1 uvcvideo
videobuf2_memops       12519  1 videobuf2_vmalloc
videobuf2_core         47704  1 uvcvideo
v4l2_common            12995  1 videobuf2_core
videodev              130540  3 uvcvideo,v4l2_common,videobuf2_core
media                  18305  2 uvcvideo,videodev
arc4                   12501  2 
ath9k                  94426  0 
ath9k_common           21746  1 ath9k
ath9k_hw              395025  2 ath9k_common,ath9k
ath                    26026  3 ath9k_common,ath9k,ath9k_hw
joydev                 17063  0 
mac80211              502224  1 ath9k
i915                  865502  2 
snd_hda_codec_hdmi     45134  1 
snd_hda_codec_realtek    62994  1 
snd_hda_codec_generic    63154  1 snd_hda_codec_realtek
asus_nb_wmi            16568  0 
asus_wmi               23028  1 asus_nb_wmi
snd_hda_intel          26327  3 
sparse_keymap          12760  1 asus_wmi
snd_hda_controller     26631  1 snd_hda_intel
drm_kms_helper         49151  1 i915
snd_hda_codec         108219  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
cfg80211              438375  4 ath,ath9k_common,ath9k,mac80211
rtsx_pci_ms            16898  0 
intel_powerclamp       17122  0 
memstick               13654  1 rtsx_pci_ms
sdhci_acpi             12810  0 
sdhci                  35087  1 sdhci_acpi
rtsx_pci_sdmmc         21105  0 
rfkill                 18860  5 cfg80211,bluetooth,asus_wmi
rtsx_pci               37761  2 rtsx_pci_ms,rtsx_pci_sdmmc
mmc_core              106257  3 sdhci,sdhci_acpi,rtsx_pci_sdmmc
snd_hwdep              17205  1 snd_hda_codec
snd_pcm                88538  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
drm                   253663  3 i915,drm_kms_helper
psmouse                98914  0 
iTCO_wdt               12831  0 
iTCO_vendor_support    12649  1 iTCO_wdt
lpc_ich                20768  0 
mfd_core               12601  2 lpc_ich,rtsx_pci
snd_seq                57061  0 
snd_seq_device         13132  1 snd_seq
snd_timer              26768  2 snd_pcm,snd_seq
i2c_algo_bit           12751  1 i915
snd                    69285  16 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
r8169                  68527  0 
intel_rapl             17344  0 
mii                    12675  1 r8169
efi_pstore             12805  1 
serio_raw              12849  0 
coretemp               12820  0 
efivars                17341  1 efi_pstore
i2c_i801               16964  0 
pcspkr                 12595  0 
evdev                  17445  20 
soundcore              13026  2 snd,snd_hda_codec
iosf_mbi               12682  0 
kvm_intel             138864  0 
kvm                   404890  1 kvm_intel
wmi                    17339  1 asus_wmi
i2c_hid                17458  0 
hid                   102250  1 i2c_hid
i2c_designware_platform    12645  0 
i2c_designware_core    12813  1 i2c_designware_platform
battery                13356  0 
video                  17991  2 i915,asus_wmi
thermal                17559  0 
ac                     12715  0 
processor              28159  0 
i2c_core               50108  9 drm,i915,i2c_i801,i2c_hid,i2c_designware_platform,drm_kms_helper,i2c_algo_bit,v4l2_common,videodev
thermal_sys            27546  4 video,intel_powerclamp,thermal,processor
button                 12944  1 i915
ext4                  494080  1 
crc16                  12343  2 ext4,bluetooth
mbcache                17171  1 ext4
jbd2                   82399  1 ext4
sd_mod                 44302  6 
sr_mod                 21903  0 
cdrom                  51680  1 sr_mod
crc_t10dif             12431  1 sd_mod
crct10dif_pclmul       13348  1 
crct10dif_common       12356  2 crct10dif_pclmul,crc_t10dif
crc32_pclmul           12915  0 
crc32c_intel           21809  0 
ghash_clmulni_intel    12978  0 
cryptd                 18613  1 ghash_clmulni_intel
ahci                   33291  5 
libahci                27145  1 ahci
xhci_hcd              152894  0 
usbcore               199395  2 uvcvideo,xhci_hcd
usb_common             12440  1 usbcore
libata                181416  2 ahci,libahci
scsi_mod              195196  3 libata,sd_mod,sr_mod
dm_mirror              21695  0 
dm_region_hash         17431  1 dm_mirror
dm_log                 17586  2 dm_region_hash,dm_mirror
dm_mod                 93455  2 dm_log,dm_mirror
             total       used       free     shared    buffers     cached
Mem:       3945120    1442568    2502552          0      94656     698712
-/+ buffers/cache:     649200    3295920
Swap:      1952764          0    1952764

/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:

/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend:

/etc/pm/sleep.d/10_unattended-upgrades-hibernate suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend:
Having NetworkManager put all interaces to sleep...Failed.

/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend:
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory

/usr/lib/pm-utils/sleep.d/60_wpa_supplicant suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:

/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:

/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95anacron suspend suspend:

/usr/lib/pm-utils/sleep.d/95anacron suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend:

/usr/lib/pm-utils/sleep.d/95hdparm-apm suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:

/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:

/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0

/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Thu Feb 12 22:08:09 CET 2015: performing suspend
Thu Feb 12 22:23:31 CET 2015: Awake.
Thu Feb 12 22:23:31 CET 2015: Running hooks for resume
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:

/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:

/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:

/usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend:

/dev/sda:
 setting Advanced Power Management level to 0xfe (254)
 APM_level	= 254

/dev/sda:
 setting Advanced Power Management level to 0xfe (254)
 APM_level	= 254

/usr/lib/pm-utils/sleep.d/95hdparm-apm resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95anacron resume suspend:

/usr/lib/pm-utils/sleep.d/95anacron resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:

/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:

/usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.

/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend:
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory

/usr/lib/pm-utils/sleep.d/60_wpa_supplicant resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend:
Having NetworkManager wake interfaces back up...Failed.

/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
Running hook /etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend:

/etc/pm/sleep.d/10_unattended-upgrades-hibernate resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:

/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:

/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change resume suspend:

/usr/lib/pm-utils/sleep.d/000kernel-change resume suspend: success.
Thu Feb 12 22:23:32 CET 2015: Finished.
dmesg

Code: Select all

[    0.358396] NET: Registered protocol family 2
[    0.358798] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.358931] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.359076] TCP: Hash tables configured (established 32768 bind 32768)
[    0.359130] TCP: reno registered
[    0.359143] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.359182] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.359336] NET: Registered protocol family 1
[    0.359366] pci 0000:00:02.0: Video device with shadowed ROM
[    0.359692] PCI: CLS 64 bytes, default 64
[    0.359790] Unpacking initramfs...
[    0.766795] Freeing initrd memory: 14572K (ffff88007f1c5000 - ffff880080000000)
[    0.766889] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.766894] software IO TLB [mem 0xa5814000-0xa9814000] (64MB) mapped at [ffff8800a5814000-ffff8800a9813fff]
[    0.767193] microcode: CPU0 sig=0x30678, pf=0x8, revision=0x809
[    0.767203] microcode: CPU1 sig=0x30678, pf=0x8, revision=0x809
[    0.767307] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.767859] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.767911] audit: initializing netlink subsys (disabled)
[    0.767945] audit: type=2000 audit(1423817073.767:1): initialized
[    0.768547] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.768587] zbud: loaded
[    0.768912] VFS: Disk quotas dquot_6.5.2
[    0.768940] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.769033] msgmni has been set to 7701
[    0.769739] alg: No test for stdrng (krng)
[    0.769799] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.769906] io scheduler noop registered
[    0.769912] io scheduler deadline registered
[    0.769979] io scheduler cfq registered (default)
[    0.770660] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.770694] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.770821] simple-framebuffer simple-framebuffer.0: framebuffer at 0xc0000000, 0x408000 bytes, mapped to 0xffffc90010780000
[    0.770827] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1366x768x32, linelength=5504
[    0.776886] Console: switching to colour frame buffer device 170x48
[    0.782754] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    0.782772] intel_idle: MWAIT substates: 0x33000020
[    0.782775] intel_idle: v0.4 model 0x37
[    0.782777] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.783041] GHES: HEST is not enabled!
[    0.783187] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.803345] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.804079] hpet: number irqs doesn't agree with number of timers
[    0.804122] Linux agpgart interface v0.103
[    0.804317] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.807143] i8042: Detected active multiplexing controller, rev 1.1
[    0.809221] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.809232] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.809252] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.809257] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.809261] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.809662] mousedev: PS/2 mouse device common for all mice
[    0.809740] rtc_cmos 00:00: RTC can wake from S4
[    0.809916] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    0.809945] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
[    0.809967] Intel P-state driver initializing.
[    0.809987] Intel pstate controlling: cpu 0
[    0.810024] Intel pstate controlling: cpu 1
[    0.810084] ledtrig-cpu: registered to indicate activity on CPUs
[    0.810376] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.810379] AMD IOMMUv2 functionality not available on this system
[    0.810527] TCP: cubic registered
[    0.810655] NET: Registered protocol family 10
[    0.811024] mip6: Mobile IPv6
[    0.811030] NET: Registered protocol family 17
[    0.811040] mpls_gso: MPLS GSO support
[    0.811773] registered taskstats version 1
[    0.813333] rtc_cmos 00:00: setting system clock to 2015-02-13 08:44:34 UTC (1423817074)
[    0.813701] PM: Hibernation image not present or could not be loaded.
[    0.815844] Freeing unused kernel memory: 1200K (ffffffff818ec000 - ffffffff81a18000)
[    0.815850] Write protecting the kernel read-only data: 8192k
[    0.818961] Freeing unused kernel memory: 704K (ffff880001550000 - ffff880001600000)
[    0.819908] Freeing unused kernel memory: 220K (ffff8800017c9000 - ffff880001800000)
[    0.849042] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.866065] dracut: dracut-7 (wheezy) dracut-
[    0.914211] device-mapper: uevent: version 1.0.3
[    0.914355] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.921008] udevd[90]: starting version 175
[    0.981683] SCSI subsystem initialized
[    0.985901] ACPI: bus type USB registered
[    0.985954] usbcore: registered new interface driver usbfs
[    0.985977] usbcore: registered new interface driver hub
[    1.001549] usbcore: registered new device driver usb
[    1.002922] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.002937] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.003341] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.003375] xhci_hcd 0000:00:14.0: irq 103 for MSI/MSI-X
[    1.003490] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.003494] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.003497] usb usb1: Product: xHCI Host Controller
[    1.003500] usb usb1: Manufacturer: Linux 3.16.0-0.bpo.4-amd64 xhci_hcd
[    1.003503] usb usb1: SerialNumber: 0000:00:14.0
[    1.004563] hub 1-0:1.0: USB hub found
[    1.004584] hub 1-0:1.0: 6 ports detected
[    1.023756] libata version 3.00 loaded.
[    1.026106] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.026116] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.026207] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.026211] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.026214] usb usb2: Product: xHCI Host Controller
[    1.026216] usb usb2: Manufacturer: Linux 3.16.0-0.bpo.4-amd64 xhci_hcd
[    1.026219] usb usb2: SerialNumber: 0000:00:14.0
[    1.026465] hub 2-0:1.0: USB hub found
[    1.026481] hub 2-0:1.0: 1 port detected
[    1.028816] ahci 0000:00:13.0: version 3.0
[    1.029026] ahci 0000:00:13.0: irq 104 for MSI/MSI-X
[    1.042808] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.042817] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso sadm apst 
[    1.068493] scsi0 : ahci
[    1.084231] scsi1 : ahci
[    1.084359] ata1: SATA max UDMA/133 abar m2048@0xd0815000 port 0xd0815100 irq 104
[    1.084363] ata2: SATA max UDMA/133 abar m2048@0xd0815000 port 0xd0815180 irq 104
[    1.129937] alg: No test for crc32 (crc32-pclmul)
[    1.335333] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[    1.411375] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.412823] ata1.00: ATA-8: HGST HTS545050A7E680, GG2OAF10, max UDMA/133
[    1.412843] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.414412] ata1.00: configured for UDMA/133
[    1.415426] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS545050A7 AF10 PQ: 0 ANSI: 5
[    1.419374] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.423291] ata2.00: ATAPI: TSSTcorp CDDVDW SN-208FB, AS00, max UDMA/100
[    1.428259] ata2.00: configured for UDMA/100
[    1.449391] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208FB  AS00 PQ: 0 ANSI: 5
[    1.481548] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.481570] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.482068] sd 0:0:0:0: [sda] Write Protect is off
[    1.482090] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.482296] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.487634] usb 1-4: New USB device found, idVendor=0bda, idProduct=57b5
[    1.487655] usb 1-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.487671] usb 1-4: Product: USB Camera
[    1.487684] usb 1-4: Manufacturer: 04081-00051500E65ETP
[    1.487698] usb 1-4: SerialNumber: 200901010001
[    1.498796] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.498816] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.500778] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.547215]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11
[    1.553100] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.767614] tsc: Refined TSC clocksource calibration: 2166.666 MHz
[    2.768485] Switched to clocksource tsc
[    3.268982] random: nonblocking pool is initialized
[    3.290771] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[    3.409391] dracut: Checking ext4: /dev/disk/by-uuid/102b7d37-6083-4ed2-b62e-04a31abc724f
[    3.409842] dracut: issuing e2fsck -a  /dev/disk/by-uuid/102b7d37-6083-4ed2-b62e-04a31abc724f
[    3.494431] dracut: /dev/disk/by-uuid/102b7d37-6083-4ed2-b62e-04a31abc724f: clean, 305639/3203072 files, 2770207/12793088 blocks
[    3.496112] dracut: Remounting /dev/disk/by-uuid/102b7d37-6083-4ed2-b62e-04a31abc724f with -o errors=remount-ro,ro
[    3.540319] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[    3.596904] dracut: Mounted root filesystem /dev/sda9
[    3.817218] dracut: Switching root
[    5.607850] udevd[513]: starting version 175
[    6.370997] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[    6.371007] ACPI: Power Button [PWRB]
[    6.371210] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[    6.372429] ACPI: Lid Switch [LID]
[    6.372530] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
[    6.372538] ACPI: Sleep Button [SLPB]
[    6.372615] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[    6.372620] ACPI: Power Button [PWRF]
[    6.389508] ACPI: AC Adapter [AC0] (on-line)
[    6.392105] thermal LNXTHERM:00: registered as thermal_zone0
[    6.392110] ACPI: Thermal Zone [THRM] (0 C)
[    6.636938] ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[    6.636972] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.701807] ACPI: Battery Slot [BAT0] (battery present)
[    6.782097] input: PC Speaker as /devices/platform/pcspkr/input/input9
[    6.829095] wmi: Mapper loaded
[    6.888143] EFI Variables Facility v0.08 2004-May-17
[    6.895015] efivars: duplicate variable: AcpiGlobalVariable-c020489e-6db2-4ef2-9aa5-ca06fc11d36a
[    6.959215] pstore: Registered efi as persistent store backend
[    7.076765] hidraw: raw HID events driver (C) Jiri Kosina
[    7.112215] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    7.112241] r8169 0000:03:00.2: can't disable ASPM; OS doesn't have ASPM control
[    7.112648] r8169 0000:03:00.2: irq 105 for MSI/MSI-X
[    7.113242] r8169 0000:03:00.2 eth0: RTL8402 at 0xffffc90000658000, 10:c3:7b:be:49:40, XID 04000800 IRQ 105
[    7.158159] sdhci: Secure Digital Host Controller Interface driver
[    7.158165] sdhci: Copyright(c) Pierre Ossman
[    7.224130] intel_rapl: RAPL domain uncore detection failed
[    7.224152] intel_rapl: RAPL domain dram detection failed
[    7.274487] rtsx_pci 0000:03:00.0: irq 106 for MSI/MSI-X
[    7.274509] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 106
[    7.380401] [drm] Initialized drm 1.1.0 20060810
[    7.657536] iTCO_vendor_support: vendor-support=0
[    7.704340] [drm] Memory usable by graphics device = 2048M
[    7.704348] [drm] Replacing VGA console driver
[    7.704357] checking generic (c0000000 408000) vs hw (c0000000 10000000)
[    7.704361] fb: switching to inteldrmfb from simple
[    7.704427] Console: switching to colour dummy device 80x25
[    7.712397] i915 0000:00:02.0: irq 107 for MSI/MSI-X
[    7.712422] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    7.712426] [drm] Driver supports precise vblank timestamp query.
[    7.780282] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    7.780405] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[    7.781284] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.792568] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    7.828993] [drm] DRRS not supported
[    7.853021] cfg80211: Calling CRDA to update world regulatory domain
[    8.006665] asus_wmi: ASUS WMI generic driver loaded
[    8.017787] asus_wmi: Initialization: 0x1
[    8.017960] asus_wmi: BIOS WMI version: 7.9
[    8.018133] asus_wmi: SFUN value: 0x4a0877
[    8.022131] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input14
[    8.030734] asus_wmi: Backlight controlled by ACPI video driver
[    8.097909] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x381f05)
[    8.112716] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[    8.152010] media: Linux media interface: v0.10
[    8.174744] fbcon: inteldrmfb (fb0) is primary device
[    8.177506] Linux video capture interface: v2.00
[    8.181111] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input13
[    8.349960] ath: phy0: Disable PLL PowerSave
[    8.356293] ath: phy0: Enable LNA combining
[    8.357459] ath: phy0: ASPM enabled: 0x42
[    8.357465] ath: EEPROM regdomain: 0x60
[    8.357468] ath: EEPROM indicates we should expect a direct regpair map
[    8.357476] ath: Country alpha2 being used: 00
[    8.357478] ath: Regpair used: 0x60
[    8.407659] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    8.409187] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90010980000, irq=17
[    8.777609] uvcvideo: Found UVC 1.00 device USB Camera (0bda:57b5)
[    8.785427] input: USB Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input15
[    8.785914] usbcore: registered new interface driver uvcvideo
[    8.785918] USB Video Class driver (1.1.1)
[    8.970254] cfg80211: World regulatory domain updated:
[    8.970264] cfg80211:  DFS Master region: unset
[    8.970264] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    8.970277] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    8.970285] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    8.970292] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    8.970299] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[    8.970307] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    8.970315] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    8.970322] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    8.970329] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    9.826201] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    9.946210] Console: switching to colour frame buffer device 170x48
[    9.974205] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    9.974220] i915 0000:00:02.0: registered panic notifier
[   10.021332] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   10.028594] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
[   10.030627] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   10.033285] snd_hda_intel 0000:00:1b.0: irq 108 for MSI/MSI-X
[   10.263121] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   10.263127] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   10.263131] sound hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   10.263134] sound hdaudioC0D0:    mono: mono_out=0x0
[   10.263137] sound hdaudioC0D0:    inputs:
[   10.263141] sound hdaudioC0D0:      Mic=0x19
[   10.456140] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   10.456505] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   12.596318] Adding 1952764k swap on /dev/sda8.  Priority:-1 extents:1 across:1952764k FS
[   12.615785] EXT4-fs (sda9): re-mounted. Opts: (null)
[   12.945624] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro
[   13.112070] loop: module loaded
[   14.109057] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   14.185794] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   14.265069] fuse init (API version 7.23)
[   15.843718] RPC: Registered named UNIX socket transport module.
[   15.843727] RPC: Registered udp transport module.
[   15.843731] RPC: Registered tcp transport module.
[   15.843734] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   15.876814] FS-Cache: Loaded
[   15.921817] FS-Cache: Netfs 'nfs' registered for caching
[   16.005045] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   18.219726] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input19
syslog

Code: Select all

0000:00:1b.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.657959] pcieport 0000:00:1c.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.657983] pcieport 0000:00:1c.1: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.658155] ath9k 0000:02:00.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.658180] pcieport 0000:00:1c.3: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.658227] rtsx_pci 0000:03:00.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.658271] r8169 0000:03:00.2: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.658296] lpc_ich 0000:00:1f.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.658309] lpc_ich 0000:00:1f.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.658340] pci 0000:00:1f.3: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.658353] pci 0000:00:1f.3: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.659173] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
Feb 13 09:49:07 debian kernel: [  273.659226] iosf_mbi_pci 0000:00:00.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.659240] iosf_mbi_pci 0000:00:00.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.659274] i915 0000:00:02.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.659287] i915 0000:00:02.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.659319] ahci 0000:00:13.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.659332] ahci 0000:00:13.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.659364] xhci_hcd 0000:00:14.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.659377] xhci_hcd 0000:00:14.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.659408] pci 0000:00:1a.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.659421] pci 0000:00:1a.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.659455] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.659469] snd_hda_intel 0000:00:1b.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.659501] pcieport 0000:00:1c.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.659525] pcieport 0000:00:1c.1: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.660387] ath9k 0000:02:00.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.661231] pcieport 0000:00:1c.3: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.661285] rtsx_pci 0000:03:00.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.661331] r8169 0000:03:00.2: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.661357] lpc_ich 0000:00:1f.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.661370] lpc_ich 0000:00:1f.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.661404] pci 0000:00:1f.3: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.661417] pci 0000:00:1f.3: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.662400] pci_bus 0000:01: Allocating resources
Feb 13 09:49:07 debian kernel: [  273.662448] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
Feb 13 09:49:07 debian kernel: [  273.662470] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
Feb 13 09:49:07 debian kernel: [  273.662491] pci_bus 0000:02: Allocating resources
Feb 13 09:49:07 debian kernel: [  273.662655] pcieport 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
Feb 13 09:49:07 debian kernel: [  273.662677] pci_bus 0000:03: Allocating resources
Feb 13 09:49:07 debian kernel: [  273.662722] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
Feb 13 09:49:07 debian kernel: [  273.662744] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
Feb 13 09:49:07 debian kernel: [  273.662780] pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
Feb 13 09:49:07 debian kernel: [  273.662799] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Feb 13 09:49:07 debian kernel: [  273.662817] pcieport 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Feb 13 09:49:07 debian kernel: [  273.662835] pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Feb 13 09:49:07 debian kernel: [  273.662870] pcieport 0000:00:1c.0: BAR 14: can't assign mem (size 0x200000)
Feb 13 09:49:07 debian kernel: [  273.662911] pcieport 0000:00:1c.0: BAR 15: can't assign mem pref (size 0x200000)
Feb 13 09:49:07 debian kernel: [  273.662948] pcieport 0000:00:1c.1: BAR 15: can't assign mem pref (size 0x200000)
Feb 13 09:49:07 debian kernel: [  273.662984] pcieport 0000:00:1c.3: BAR 15: can't assign mem pref (size 0x200000)
Feb 13 09:49:07 debian kernel: [  273.663026] pcieport 0000:00:1c.3: BAR 15: can't assign mem pref (size 0x200000)
Feb 13 09:49:07 debian kernel: [  273.663062] pcieport 0000:00:1c.1: BAR 15: can't assign mem pref (size 0x200000)
Feb 13 09:49:07 debian kernel: [  273.663088] pcieport 0000:00:1c.0: BAR 14: can't assign mem (size 0x200000)
Feb 13 09:49:07 debian kernel: [  273.663123] pcieport 0000:00:1c.0: BAR 15: can't assign mem pref (size 0x200000)
Feb 13 09:49:07 debian kernel: [  273.663171] iosf_mbi_pci 0000:00:00.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.663186] iosf_mbi_pci 0000:00:00.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.663220] i915 0000:00:02.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.663233] i915 0000:00:02.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.663265] ahci 0000:00:13.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.663278] ahci 0000:00:13.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.663311] xhci_hcd 0000:00:14.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.663324] xhci_hcd 0000:00:14.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.663356] pci 0000:00:1a.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.663369] pci 0000:00:1a.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.663403] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.663416] snd_hda_intel 0000:00:1b.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.663448] pcieport 0000:00:1c.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.663473] pcieport 0000:00:1c.1: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.663643] ath9k 0000:02:00.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.663668] pcieport 0000:00:1c.3: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.663712] rtsx_pci 0000:03:00.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.663756] r8169 0000:03:00.2: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.663782] lpc_ich 0000:00:1f.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.663795] lpc_ich 0000:00:1f.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.663829] pci 0000:00:1f.3: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.663843] pci 0000:00:1f.3: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.666054] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
Feb 13 09:49:07 debian kernel: [  273.666115] iosf_mbi_pci 0000:00:00.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.666130] iosf_mbi_pci 0000:00:00.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.666165] i915 0000:00:02.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.666179] i915 0000:00:02.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.666210] ahci 0000:00:13.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.666223] ahci 0000:00:13.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.666256] xhci_hcd 0000:00:14.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.666269] xhci_hcd 0000:00:14.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.666300] pci 0000:00:1a.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.666313] pci 0000:00:1a.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.666348] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.666361] snd_hda_intel 0000:00:1b.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.666394] pcieport 0000:00:1c.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.666419] pcieport 0000:00:1c.1: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.666590] ath9k 0000:02:00.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.666616] pcieport 0000:00:1c.3: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.666661] rtsx_pci 0000:03:00.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.666704] r8169 0000:03:00.2: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.666730] lpc_ich 0000:00:1f.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.666743] lpc_ich 0000:00:1f.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.666775] pci 0000:00:1f.3: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.666788] pci 0000:00:1f.3: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.667286] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
Feb 13 09:49:07 debian kernel: [  273.667340] iosf_mbi_pci 0000:00:00.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.667354] iosf_mbi_pci 0000:00:00.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.667389] i915 0000:00:02.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.667402] i915 0000:00:02.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.667433] ahci 0000:00:13.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.667447] ahci 0000:00:13.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.667479] xhci_hcd 0000:00:14.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.667492] xhci_hcd 0000:00:14.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.667523] pci 0000:00:1a.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.667536] pci 0000:00:1a.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.667570] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.667583] snd_hda_intel 0000:00:1b.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.667615] pcieport 0000:00:1c.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.667639] pcieport 0000:00:1c.1: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.667810] ath9k 0000:02:00.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.667835] pcieport 0000:00:1c.3: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.667880] rtsx_pci 0000:03:00.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.667924] r8169 0000:03:00.2: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.667948] lpc_ich 0000:00:1f.0: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.667961] lpc_ich 0000:00:1f.0: using default PCI settings
Feb 13 09:49:07 debian kernel: [  273.667993] pci 0000:00:1f.3: no hotplug settings from platform
Feb 13 09:49:07 debian kernel: [  273.668006] pci 0000:00:1f.3: using default PCI settings
Top
User avatar
mor
Posts: 970
Joined: 2010-08-28 15:16
Location: mor@debian

Re: Laptop on Lid Close - Not Suspended, just locked

#4 Post by mor »

Are you using systemd?

I remember this:
http://forums.debian.net/viewtopic.php?p=518599#p518599

… or maybe things have changed since then, don't know.

Bye
Top
jesus92gz
Posts: 121
Joined: 2015-02-06 18:07

Re: Laptop on Lid Close - Not Suspended, just locked

#5 Post by jesus92gz »

I'm not using systemd. Any way I can accomplish this without systemd?
Top
v&n
Posts: 635
Joined: 2015-02-04 02:57
Been thanked: 3 times

Re: Laptop on Lid Close - Not Suspended, just locked

#6 Post by v&n »

If not systemd, then maybe a bug like this one : https://bugs.launchpad.net/ubuntu/+sour ... bug/863834

Possible workaround based on a comment in the above bug report : http://askubuntu.com/a/395440
Top
jesus92gz
Posts: 121
Joined: 2015-02-06 18:07

Re: Laptop on Lid Close - Not Suspended, just locked

#7 Post by jesus92gz »

I tried that fix, adding lid.sh.post in /etc/acpi/local/, but it's not resulting in suspended mode. I also tried adding pm-suspend everywhere in lid.sh config file without expected result.

The lid.sh.post file settings (755 permissons, owner root, as the other scripts in /etc/acpi/)

Code: Select all

root@debian:/etc/acpi/local# ls -l
total 4
-rwxr-xr-x 1 root root 101 feb 14 18:24 lid.sh.post
The lid.sh.post content (I tried both #!/bin/bash and #!/bin/sh, just in case):

Code: Select all

root@debian:/etc/acpi/local# cat lid.sh.post 
#!/bin/sh

grep -q closed /proc/acpi/button/lid/*/state
if [ $? = 0 ]
then

/usr/sbin/pm-suspend

fi
What's curious is that, even if I remove the main lid.sh script that's triggered when the lid is closed/opened, from /etc/acpi/, it's also locking the screen. The wrong event or script may be triggered, I think. How could I check what's the event/script that's triggered? I will try editing other files in /etc/acpi meanwhile, and try to fix it on my own.

I have read somewhere I could run this command to check if it detects the lid close. And it doesn't. It just detects events when I click fn+F1 (sleep/suspend shortcut in keyboard). This is the output of this command:

Code: Select all

root@debian:/etc/acpi/local# udevadm monitor --environment
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent

KERNEL[3003.666869] change   /devices/platform/regulatory.0 (platform)
ACTION=change
COUNTRY=00
DEVPATH=/devices/platform/regulatory.0
MODALIAS=platform:regulatory
SEQNUM=1784
SUBSYSTEM=platform
UDEV_LOG=3

UDEV  [3003.710022] change   /devices/platform/regulatory.0 (platform)
ACTION=change
COUNTRY=00
DEVPATH=/devices/platform/regulatory.0
MODALIAS=platform:regulatory
SEQNUM=1784
SUBSYSTEM=platform
UDEV_LOG=3
USEC_INITIALIZED=3003670940

KERNEL[3009.388771] remove   /devices/system/machinecheck/machinecheck1 (machinecheck)
ACTION=remove
DEVPATH=/devices/system/machinecheck/machinecheck1
SEQNUM=1785
SUBSYSTEM=machinecheck
UDEV_LOG=3

UDEV  [3009.388828] remove   /devices/system/machinecheck/machinecheck1 (machinecheck)
ACTION=remove
DEVPATH=/devices/system/machinecheck/machinecheck1
SEQNUM=1785
SUBSYSTEM=machinecheck
UDEV_LOG=3
USEC_INITIALIZED=3009387553

KERNEL[3009.388865] add      /devices/system/machinecheck/machinecheck1 (machinecheck)
ACTION=add
DEVPATH=/devices/system/machinecheck/machinecheck1
SEQNUM=1786
SUBSYSTEM=machinecheck
UDEV_LOG=3

KERNEL[3009.388905] change   /devices/pci0000:00/0000:00:02.0/drm/card0 (drm)
ACTION=change
DEVNAME=dri/card0
DEVPATH=/devices/pci0000:00/0000:00:02.0/drm/card0
DEVTYPE=drm_minor
HOTPLUG=1
MAJOR=226
MINOR=0
SEQNUM=1787
SUBSYSTEM=drm
UDEV_LOG=3

UDEV  [3009.391802] add      /devices/system/machinecheck/machinecheck1 (machinecheck)
ACTION=add
DEVPATH=/devices/system/machinecheck/machinecheck1
SEQNUM=1786
SUBSYSTEM=machinecheck
UDEV_LOG=3
USEC_INITIALIZED=3009391346

UDEV  [3009.394836] change   /devices/pci0000:00/0000:00:02.0/drm/card0 (drm)
ACTION=change
DEVNAME=/dev/dri/card0
DEVPATH=/devices/pci0000:00/0000:00:02.0/drm/card0
DEVTYPE=drm_minor
HOTPLUG=1
MAJOR=226
MINOR=0
SEQNUM=1787
SUBSYSTEM=drm
TAGS=:udev-acl:
UDEV_LOG=3
USEC_INITIALIZED=9978641

KERNEL[3012.053803] change   /devices/platform/regulatory.0 (platform)
ACTION=change
COUNTRY=ES
DEVPATH=/devices/platform/regulatory.0
MODALIAS=platform:regulatory
SEQNUM=1788
SUBSYSTEM=platform
UDEV_LOG=3

UDEV  [3012.083397] change   /devices/platform/regulatory.0 (platform)
ACTION=change
COUNTRY=ES
DEVPATH=/devices/platform/regulatory.0
MODALIAS=platform:regulatory
SEQNUM=1788
SUBSYSTEM=platform
UDEV_LOG=3
USEC_INITIALIZED=3012055187


I run the following command in order to check if the lid state is changing.

Code: Select all

root@debian:/proc/acpi/button/lid/LID# for ((i=0;i<100;i++)); do cat /proc/acpi/button/lid/LID/state; sleep 5; done;
state:      open
state:      open
state:      open
state:      open
state:      closed
state:      closed
state:      closed
state:      closed
state:      closed
state:      closed
state:      closed
state:      open
state:      open
state:      open
In /etc/acpi/events/lidbtn the event that it listens to, and the action/script that's triggered:

Code: Select all

# /etc/acpi/events/lidbtn
# Called when the user closes or opens the lid

event=button[ /]lid
action=/etc/acpi/lid.sh
I have also reboot the computer with lid.sh.post and also without main lid.sh, and the functionality is the same, screen locked.

Thank you
Top
jesus92gz
Posts: 121
Joined: 2015-02-06 18:07

Re: Laptop on Lid Close - Not Suspended, just locked

#8 Post by jesus92gz »

I have found the solution:

There is a script that's run each time the lid is closed lid.sh in /etc/acpi/ directory.
After setting up some logging/debugging logs, I could notice that the script was no longer running after CheckPolicy && exit line in lid.sh. So I decided to remove this line, and the screen was still locked. But this was crucial for the suspend when lid close to be functional.

I then edited, /etc/default/acpi-support and uncommented one line:

Code: Select all

# Uncomment this to enable ACPI sleep when the lid screen is closed.
LID_SLEEP=true
Thank you for your help. This problem is now solved and it's working as expected.
Top
v&n
Posts: 635
Joined: 2015-02-04 02:57
Been thanked: 3 times

Re: [SOLVED] Laptop on Lid Close - Not Suspended, just locke

#9 Post by v&n »

Nice discovery. Congratulations!
(and thanks for free credits.. :P )
Top
Post Reply

Return to “Beginners Questions”